linux-phy.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen@kernel.org>
To: Xu Yang <xu.yang_2@nxp.com>
Cc: vkoul@kernel.org, kishon@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, gregkh@linuxfoundation.org,
	herve.codina@bootlin.com, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org,
	jun.li@nxp.com
Subject: Re: [PATCH v2 4/6] usb: phy: mxs: add wakeup enable for imx7ulp
Date: Fri, 9 Aug 2024 09:34:58 +0800	[thread overview]
Message-ID: <20240809013458.GE2673490@nchen-desktop> (raw)
In-Reply-To: <20240726113207.3393247-4-xu.yang_2@nxp.com>

On 24-07-26 19:32:05, Xu Yang wrote:
> This wakeup setting can enable USB wakeup function even the
> controller's power is lost, and both A7 and M4 are in VLLS mode.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

Reviewed-by: Peter Chen <peter.chen@kernel.org>
> 
> ---
> Changes in v2:
>  - no changes
> ---
>  drivers/usb/phy/phy-mxs-usb.c | 41 +++++++++++++++++++++++++++++++++--
>  1 file changed, 39 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index e172af75f602..acaae22df3ba 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -118,6 +118,11 @@
>  #define BM_ANADIG_USB2_MISC_RX_VPIN_FS		BIT(29)
>  #define BM_ANADIG_USB2_MISC_RX_VMIN_FS		BIT(28)
>  
> +/* System Integration Module (SIM) Registers */
> +#define SIM_GPR1				0x30
> +
> +#define USB_PHY_VLLS_WAKEUP_EN			BIT(0)
> +
>  #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
>  
>  /* Do disconnection between PHY and controller without vbus */
> @@ -214,6 +219,7 @@ struct mxs_phy {
>  	struct clk *clk;
>  	const struct mxs_phy_data *data;
>  	struct regmap *regmap_anatop;
> +	struct regmap *regmap_sim;
>  	int port_id;
>  	u32 tx_reg_set;
>  	u32 tx_reg_mask;
> @@ -772,6 +778,17 @@ static int mxs_phy_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	/* Currently, only imx7ulp has SIM module */
> +	if (of_get_property(np, "nxp,sim", NULL)) {
> +		mxs_phy->regmap_sim = syscon_regmap_lookup_by_phandle
> +			(np, "nxp,sim");
> +		if (IS_ERR(mxs_phy->regmap_sim)) {
> +			dev_dbg(&pdev->dev,
> +				"failed to find regmap for sim\n");
> +			return PTR_ERR(mxs_phy->regmap_sim);
> +		}
> +	}
> +
>  	/* Precompute which bits of the TX register are to be updated, if any */
>  	if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) &&
>  	    val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
> @@ -849,6 +866,22 @@ static void mxs_phy_remove(struct platform_device *pdev)
>  }
>  
>  #ifdef CONFIG_PM_SLEEP
> +static void mxs_phy_wakeup_enable(struct mxs_phy *mxs_phy, bool on)
> +{
> +	u32 mask = USB_PHY_VLLS_WAKEUP_EN;
> +
> +	/* If the SoCs don't have SIM, quit */
> +	if (!mxs_phy->regmap_sim)
> +		return;
> +
> +	if (on) {
> +		regmap_update_bits(mxs_phy->regmap_sim, SIM_GPR1, mask, mask);
> +		udelay(500);
> +	} else {
> +		regmap_update_bits(mxs_phy->regmap_sim, SIM_GPR1, mask, 0);
> +	}
> +}
> +
>  static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
>  {
>  	unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
> @@ -869,8 +902,10 @@ static int mxs_phy_system_suspend(struct device *dev)
>  {
>  	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
>  
> -	if (device_may_wakeup(dev))
> +	if (device_may_wakeup(dev)) {
>  		mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
> +		mxs_phy_wakeup_enable(mxs_phy, true);
> +	}
>  
>  	return 0;
>  }
> @@ -879,8 +914,10 @@ static int mxs_phy_system_resume(struct device *dev)
>  {
>  	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
>  
> -	if (device_may_wakeup(dev))
> +	if (device_may_wakeup(dev)) {
>  		mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
> +		mxs_phy_wakeup_enable(mxs_phy, false);
> +	}
>  
>  	return 0;
>  }
> -- 
> 2.34.1
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  reply	other threads:[~2024-08-09  1:35 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-26 11:32 [PATCH v2 1/6] usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty Xu Yang
2024-07-26 11:32 ` [PATCH v2 2/6] usb: phy: mxs: keep USBPHY2's clk always on Xu Yang
2024-08-09  1:36   ` Peter Chen
2024-07-26 11:32 ` [PATCH v2 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property Xu Yang
2024-07-29  1:03   ` Peng Fan
2024-07-29  6:16     ` Krzysztof Kozlowski
2024-07-29  6:26       ` Peng Fan
2024-08-22 10:42   ` Xu Yang
2024-08-22 11:41   ` Krzysztof Kozlowski
2024-08-29  9:09   ` Xu Yang
2024-09-03  7:08     ` Greg KH
2024-09-03  7:35       ` Xu Yang
2024-07-26 11:32 ` [PATCH v2 4/6] usb: phy: mxs: add wakeup enable for imx7ulp Xu Yang
2024-08-09  1:34   ` Peter Chen [this message]
2024-07-26 11:32 ` [PATCH v2 5/6] usb: phy: mxs: enable weak 1p1 regulator for imx6ul during suspend Xu Yang
2024-08-09  1:33   ` Peter Chen
2024-07-26 11:32 ` [PATCH v2 6/6] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1 Xu Yang
2024-08-26  6:56   ` Xu Yang
2024-08-28  1:44     ` Shawn Guo
2024-08-29  8:54       ` Xu Yang
2024-08-09  1:26 ` [PATCH v2 1/6] usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240809013458.GE2673490@nchen-desktop \
    --to=peter.chen@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=herve.codina@bootlin.com \
    --cc=imx@lists.linux.dev \
    --cc=jun.li@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=vkoul@kernel.org \
    --cc=xu.yang_2@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).