From: Adam Ford <aford173@gmail.com>
To: linux-phy@lists.infradead.org
Cc: dominique.martinet@atmark-techno.com, linux-imx@nxp.com,
festevam@gmail.com, frieder.schrempf@kontron.de,
aford@beaconembedded.com, "Adam Ford" <aford173@gmail.com>,
"Vinod Koul" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Lucas Stach" <l.stach@pengutronix.de>,
"Marco Felsch" <m.felsch@pengutronix.de>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
linux-kernel@vger.kernel.org
Subject: [RFC V3 2/3] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup
Date: Thu, 29 Aug 2024 22:24:26 -0500 [thread overview]
Message-ID: <20240830032442.226031-2-aford173@gmail.com> (raw)
In-Reply-To: <20240830032442.226031-1-aford173@gmail.com>
The value of 'S' is writen to two places, PHY_REG3[7:4] and
PHY_REG21[3:0]. There is a lookup table which contains
the value of PHY_REG3. Rather than using a switch statement
based on the pixel clock to search for the value of 'S' again,
just shift the contents of PHY_REG3[7:4] >> 4 and place the value
in PHY_REG21[3:0]. Doing this can eliminate an entire function.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
V3: New to series
diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
index bc5d3625ece6..a700a300dc6f 100644
--- a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
+++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
@@ -355,40 +355,6 @@ to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
}
-static void
-fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
- const struct phy_config *cfg)
-{
- u8 div = 0x1;
-
- switch (cfg->pixclk) {
- case 22250000 ... 33750000:
- div = 0xf;
- break;
- case 35000000 ... 40000000:
- div = 0xb;
- break;
- case 43200000 ... 47500000:
- div = 0x9;
- break;
- case 50349650 ... 63500000:
- div = 0x7;
- break;
- case 67500000 ... 90000000:
- div = 0x5;
- break;
- case 94000000 ... 148500000:
- div = 0x3;
- break;
- case 154000000 ... 297000000:
- div = 0x1;
- break;
- }
-
- writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
- phy->regs + PHY_REG(21));
-}
-
static void
fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy,
const struct phy_config *cfg)
@@ -457,7 +423,10 @@ static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG(2) + i * 4);
- fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
+ /* High nibble of pll_div_regs[1] contains S which also gets written to REG21 */
+ writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK,
+ cfg->pll_div_regs[1] >> 4), phy->regs + PHY_REG(21));
+
fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG(33));
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2024-08-30 3:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-30 3:24 [RFC V3 1/3] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro Adam Ford
2024-08-30 3:24 ` Adam Ford [this message]
2024-08-30 3:24 ` [RFC V3 3/3] phy: freescale: fsl-samsung-hdmi: Support dynamic integer Adam Ford
2024-08-30 5:56 ` Dominique Martinet
2024-08-30 15:04 ` Adam Ford
2024-09-01 21:46 ` Dominique Martinet
2024-09-02 21:20 ` Adam Ford
2024-09-03 0:47 ` Dominique Martinet
2024-09-03 1:20 ` Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240830032442.226031-2-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=dominique.martinet@atmark-techno.com \
--cc=festevam@gmail.com \
--cc=frieder.schrempf@kontron.de \
--cc=kishon@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=m.felsch@pengutronix.de \
--cc=u.kleine-koenig@pengutronix.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).