[PATCH V4 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider

[Adam Ford <aford173@gmail.com>]

Currently, if the clock values cannot be set to the exact rate,
the round_rate and set_rate functions use the closest value found in
the look-up-table.  In preparation of removing values from the LUT
that can be calculated evenly with the integer calculator, it's
necessary to ensure to check both the look-up-table and the integer
divider clock values to get the closest values to the requested
value.  It does this by measuring the difference between the
requested clock value and the closest value in both integer divider
calucator and the fractional clock look-up-table.

Which ever has the smallest difference between them is returned as
the cloesest rate.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
 drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 40 +++++++++++++++-----
 1 file changed, 31 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
index 8822029526f0..0bf526e282a7 100644
--- a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
+++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
@@ -541,7 +541,7 @@ static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
 static long phy_clk_round_rate(struct clk_hw *hw,
 			       unsigned long rate, unsigned long *parent_rate)
 {
-	u32 int_div_clk;
+	u32 int_div_clk, delta_int, delta_frac;
 	int i;
 	u16 m;
 	u8 p, s;
@@ -554,6 +554,7 @@ static long phy_clk_round_rate(struct clk_hw *hw,
 	for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
 		if (phy_pll_cfg[i].pixclk <= rate)
 			break;
+
 	/* If the rate is an exact match, return it now */
 	if (rate == phy_pll_cfg[i].pixclk)
 		return phy_pll_cfg[i].pixclk;
@@ -570,15 +571,21 @@ static long phy_clk_round_rate(struct clk_hw *hw,
 	if (int_div_clk == rate)
 		return int_div_clk;
 
-	/* Fall back to the closest value in the LUT */
-	return phy_pll_cfg[i].pixclk;
+	/* Calculate the differences and use the closest one */
+	delta_frac = (rate - phy_pll_cfg[i].pixclk);
+	delta_int = (rate - int_div_clk);
+
+	if (delta_int < delta_frac)
+		return int_div_clk;
+	else
+		return phy_pll_cfg[i].pixclk;
 }
 
 static int phy_clk_set_rate(struct clk_hw *hw,
 			    unsigned long rate, unsigned long parent_rate)
 {
 	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
-	u32 int_div_clk;
+	u32 int_div_clk, delta_int, delta_frac;
 	int i;
 	u16 m;
 	u8 p, s;
@@ -593,19 +600,34 @@ static int phy_clk_set_rate(struct clk_hw *hw,
 		calculated_phy_pll_cfg.pll_div_regs[2] = FIELD_PREP(REG03_PMS_S_MASK, s-1);
 		/* pll_div_regs 3-6 are fixed and pre-defined already */
 		phy->cur_cfg  = &calculated_phy_pll_cfg;
+		goto done;
 	} else {
 		/* Otherwise, search the LUT */
-		dev_dbg(phy->dev, "fsl_samsung_hdmi_phy: using fractional divider\n");
-		for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
-			if (phy_pll_cfg[i].pixclk <= rate)
+		for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--) {
+			if (phy_pll_cfg[i].pixclk == rate) {
+				dev_dbg(phy->dev, "fsl_samsung_hdmi_phy: using fractional divider\n");
+				phy->cur_cfg = &phy_pll_cfg[i];
+				goto done;
+			}
+
+			if (phy_pll_cfg[i].pixclk < rate)
 				break;
+		}
 
 		if (i < 0)
 			return -EINVAL;
-
-		phy->cur_cfg = &phy_pll_cfg[i];
 	}
 
+	/* Calculate the differences for each clock against the requested value */
+	delta_frac = (rate - phy_pll_cfg[i].pixclk);
+	delta_int = (rate - int_div_clk);
+
+	/* Use the value closest to the desired */
+	if (delta_int < delta_frac)
+		phy->cur_cfg  = &calculated_phy_pll_cfg;
+	else
+		phy->cur_cfg = &phy_pll_cfg[i];
+done:
 	return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
 }
 
-- 
2.43.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy