Re: [PATCH] phy: ti: gmii-sel: Do not use syscon helper to build regmap

[Nishanth Menon <nm@ti.com>]

On 12:22-20250123, Andrew Davis wrote:
> The syscon helper device_node_to_regmap() is used to fetch a regmap
> registered to a device node. It also currently creates this regmap
> if the node did not already have a regmap associated with it. This
> should only be used on "syscon" nodes. This driver is not such a
> device and instead uses device_node_to_regmap() on its own node as
> a hacky way to create a regmap for itself.
> 
> This will not work going forward and so we should create our regmap
> the normal way by defining our regmap_config, fetching our memory
> resource, then using the normal regmap_init_mmio() function.
> 
> Signed-off-by: Andrew Davis <afd@ti.com>
> ---

Tested-by: Nishanth Menon <nm@ti.com>

Vinod,

This is part of the fixes TI K3 platforms boot issues reported in
https://lore.kernel.org/all/b2413460-ec8b-4c77-99b8-4c32b262439a@ti.com/
on the latest linus master v6.13-5001-gd0d106a2bd21 + linux
next-20250123

Total set of patches tested with:
https://lore.kernel.org/all/20250119182121.3956546-1-vaishnav.a@ti.com/
https://lore.kernel.org/r/20250123181726.597144-1-afd@ti.com
https://lore.kernel.org/r/20250123181913.597304-1-afd@ti.com
https://lore.kernel.org/r/20250123182059.597491-1-afd@ti.com
https://lore.kernel.org/r/20250123182234.597665-1-afd@ti.com

Could we get this routed to master as fixes asap please to get a sane 6.14?

Cc Rob and Lee

>  drivers/phy/ti/phy-gmii-sel.c | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
> index e0ca59ae31531..ff5d5e29629fa 100644
> --- a/drivers/phy/ti/phy-gmii-sel.c
> +++ b/drivers/phy/ti/phy-gmii-sel.c
> @@ -424,6 +424,12 @@ static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv)
>  	return 0;
>  }
>  
> +static const struct regmap_config phy_gmii_sel_regmap_cfg = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +};
> +
>  static int phy_gmii_sel_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -468,7 +474,14 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
>  
>  	priv->regmap = syscon_node_to_regmap(node->parent);
>  	if (IS_ERR(priv->regmap)) {
> -		priv->regmap = device_node_to_regmap(node);
> +		void __iomem *base;
> +
> +		base = devm_platform_ioremap_resource(pdev, 0);
> +		if (IS_ERR(base))
> +			return dev_err_probe(dev, PTR_ERR(base),
> +					     "failed to get base memory resource\n");
> +
> +		priv->regmap = regmap_init_mmio(dev, base, &phy_gmii_sel_regmap_cfg);
>  		if (IS_ERR(priv->regmap))
>  			return dev_err_probe(dev, PTR_ERR(priv->regmap),
>  					     "Failed to get syscon\n");
> -- 
> 2.39.2
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy