[PATCH 4/4] drm/mediatek: dsi: Enable runtime PM

From: Bincai Liu <bincai.liu@mediatek.com>
To: Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Jitao Shi <jitao.shi@mediatek.com>
Cc: <dri-devel@lists.freedesktop.org>,
	<linux-mediatek@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-phy@lists.infradead.org>,
	Bincai Liu <bincai.liu@mediatek.com>
Subject: [PATCH 4/4] drm/mediatek: dsi: Enable runtime PM
Date: Mon, 7 Apr 2025 21:31:25 +0800	[thread overview]
Message-ID: <20250407133138.22449-5-bincai.liu@mediatek.com> (raw)
In-Reply-To: <20250407133138.22449-1-bincai.liu@mediatek.com>

This power is new added in MT8196. So runtime PM is enable
to turn off dsi power to reduce power consumption.

Signed-off-by: Bincai Liu <bincai.liu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index b1467d6bed06..21cfba1f9b89 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -12,6 +12,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/units.h>
 
@@ -715,6 +716,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
 	dsi->data_rate = DIV_ROUND_UP_ULL(dsi->vm.pixelclock * bit_per_pixel,
 					  dsi->lanes);
 
+	pm_runtime_get_sync(dsi->host.dev);
 	ret = clk_set_rate(dsi->hs_clk, dsi->data_rate);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set data rate: %d\n", ret);
@@ -789,6 +791,7 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
 	clk_disable_unprepare(dsi->digital_clk);
 
 	phy_power_off(dsi->phy);
+	pm_runtime_put_sync(dsi->host.dev);
 
 	dsi->lanes_ready = false;
 }
@@ -1272,6 +1275,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
 	dsi->bridge.funcs = &mtk_dsi_bridge_funcs;
 	dsi->bridge.of_node = dev->of_node;
 	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
+	pm_runtime_enable(dev);
 
 	return 0;
 }
@@ -1282,6 +1286,7 @@ static void mtk_dsi_remove(struct platform_device *pdev)
 
 	mtk_output_dsi_disable(dsi);
 	mipi_dsi_host_unregister(&dsi->host);
+	pm_runtime_disable(&pdev->dev);
 }
 
 static const struct mtk_dsi_driver_data mt8173_dsi_driver_data = {
-- 
2.45.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
