[PATCH v4 03/10] phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory

[Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>]

As not only Qualcomm, but also Samsung is using the Synopsys eUSB2 IP
(albeit with a different register layout) in their newer SoCs, move the
driver out of its vendor sub-directory and rename it to phy-snps-eusb2.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 drivers/phy/Kconfig                                      | 8 ++++++++
 drivers/phy/Makefile                                     | 1 +
 .../{qualcomm/phy-qcom-snps-eusb2.c => phy-snps-eusb2.c} | 0
 drivers/phy/qualcomm/Kconfig                             | 9 ---------
 drivers/phy/qualcomm/Makefile                            | 1 -
 5 files changed, 9 insertions(+), 10 deletions(-)
 rename drivers/phy/{qualcomm/phy-qcom-snps-eusb2.c => phy-snps-eusb2.c} (100%)

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 8d58efe99..11c166204 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -43,6 +43,14 @@ config PHY_PISTACHIO_USB
 	help
 	  Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
 
+config PHY_SNPS_EUSB2
+	tristate "SNPS eUSB2 PHY Driver"
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  Enable support for the USB high-speed SNPS eUSB2 phy on select
+	  SoCs. The PHY is usually paired with a Synopsys DWC3 USB controller.
+
 config PHY_XGENE
 	tristate "APM X-Gene 15Gbps PHY support"
 	depends on HAS_IOMEM && OF && (ARCH_XGENE || COMPILE_TEST)
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index e281442ac..c670a8dac 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_PHY_CAN_TRANSCEIVER)	+= phy-can-transceiver.o
 obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
+obj-$(CONFIG_PHY_SNPS_EUSB2)		+= phy-snps-eusb2.o
 obj-$(CONFIG_USB_LGM_PHY)		+= phy-lgm-usb.o
 obj-$(CONFIG_PHY_AIROHA_PCIE)		+= phy-airoha-pcie.o
 obj-$(CONFIG_PHY_NXP_PTN3222)		+= phy-nxp-ptn3222.o
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c
similarity index 100%
rename from drivers/phy/qualcomm/phy-qcom-snps-eusb2.c
rename to drivers/phy/phy-snps-eusb2.c
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index c1e0a11dd..ef14f4e33 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -125,15 +125,6 @@ config PHY_QCOM_QUSB2
 	  PHY which is usually paired with either the ChipIdea or Synopsys DWC3
 	  USB IPs on MSM SOCs.
 
-config PHY_QCOM_SNPS_EUSB2
-	tristate "Qualcomm SNPS eUSB2 PHY Driver"
-	depends on OF && (ARCH_QCOM || COMPILE_TEST)
-	select GENERIC_PHY
-	help
-	  Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm
-	  chipsets. The PHY is paired with a Synopsys DWC3 USB controller
-	  on Qualcomm SOCs.
-
 config PHY_QCOM_EUSB2_REPEATER
 	tristate "Qualcomm SNPS eUSB2 Repeater Driver"
 	depends on OF && (ARCH_QCOM || COMPILE_TEST)
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index 42038bc30..3851e28a2 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_PHY_QCOM_QMP_USB)		+= phy-qcom-qmp-usb.o
 obj-$(CONFIG_PHY_QCOM_QMP_USB_LEGACY)	+= phy-qcom-qmp-usb-legacy.o
 
 obj-$(CONFIG_PHY_QCOM_QUSB2)		+= phy-qcom-qusb2.o
-obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2)	+= phy-qcom-snps-eusb2.o
 obj-$(CONFIG_PHY_QCOM_EUSB2_REPEATER)	+= phy-qcom-eusb2-repeater.o
 obj-$(CONFIG_PHY_QCOM_UNIPHY_PCIE_28LP)	+= phy-qcom-uniphy-pcie-28lp.o
 obj-$(CONFIG_PHY_QCOM_USB_HS) 		+= phy-qcom-usb-hs.o
-- 
2.43.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy