[PATCH 0/9] phy: convert from clk round_rate() to determine_rate()

[PATCH 0/9] phy: convert from clk round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated in the clk framework in favor
of the determine_rate() clk ops, so let's go ahead and convert the
drivers in the phy subsystem using the Coccinelle semantic patch
posted below. I did a few minor cosmetic cleanups of the code in a
few cases.

Coccinelle semantic patch:

    virtual patch

    // Look up the current name of the round_rate function
    @ has_round_rate @
    identifier round_rate_name =~ ".*_round_rate";
    identifier hw_param, rate_param, parent_rate_param;
    @@

    long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
                  unsigned long *parent_rate_param)
    {
    	...
    }

    // Rename the route_rate function name to determine_rate()
    @ script:python generate_name depends on has_round_rate @
    round_rate_name << has_round_rate.round_rate_name;
    new_name;
    @@

    coccinelle.new_name = round_rate_name.replace("_round_rate", "_determine_rate")

    // Change rate to req->rate; also change occurrences of 'return XXX'.
    @ chg_rate depends on generate_name @
    identifier has_round_rate.round_rate_name;
    identifier has_round_rate.hw_param;
    identifier has_round_rate.rate_param;
    identifier has_round_rate.parent_rate_param;
    identifier ERR =~ "E.*";
    expression E;
    @@

    long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
                  unsigned long *parent_rate_param)
    {
    <...
    (
    -return -ERR;
    +return -ERR;
    |
    - return rate_param;
    + return 0;
    |
    - return E;
    + req->rate = E;
    +
    + return 0;
    |
    - rate_param
    + req->rate
    )
    ...>
    }

    // Coccinelle only transforms the first occurrence of the rate parameter
    // Run a second time. FIXME: Is there a better way to do this?
    @ chg_rate2 depends on generate_name @
    identifier has_round_rate.round_rate_name;
    identifier has_round_rate.hw_param;
    identifier has_round_rate.rate_param;
    identifier has_round_rate.parent_rate_param;
    @@

    long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
                  unsigned long *parent_rate_param)
    {
    <...
    - rate_param
    + req->rate
    ...>
    }

    // Change parent_rate to req->best_parent_rate
    @ chg_parent_rate depends on generate_name @
    identifier has_round_rate.round_rate_name;
    identifier has_round_rate.hw_param;
    identifier has_round_rate.rate_param;
    identifier has_round_rate.parent_rate_param;
    @@

    long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
                  unsigned long *parent_rate_param)
    {
    <...
    (
    - *parent_rate_param
    + req->best_parent_rate
    |
    - parent_rate_param
    + &req->best_parent_rate
    )
    ...>
    }

    // Convert the function definition from round_rate() to determine_rate()
    @ func_definition depends on chg_rate @
    identifier has_round_rate.round_rate_name;
    identifier has_round_rate.hw_param;
    identifier has_round_rate.rate_param;
    identifier has_round_rate.parent_rate_param;
    identifier generate_name.new_name;
    @@

    - long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
    -               unsigned long *parent_rate_param)
    + int new_name(struct clk_hw *hw, struct clk_rate_request *req)
    {
        ...
    }

    // Update the ops from round_rate() to determine_rate()
    @ ops depends on func_definition @
    identifier has_round_rate.round_rate_name;
    identifier generate_name.new_name;
    @@

    {
        ...,
    -   .round_rate = round_rate_name,
    +   .determine_rate = new_name,
        ...,
    }

Note that I used coccinelle 1.2 instead of 1.3 since the newer version
adds unnecessary braces as described in this post.
https://lore.kernel.org/cocci/67642477-5f3e-4b2a-914d-579a54f48cbd@intel.com/

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
Brian Masney (9):
      phy: freescale: phy-fsl-samsung-hdmi: convert from round_rate() to determine_rate()
      phy: mediatek: phy-mtk-hdmi-mt2701: convert from round_rate() to determine_rate()
      phy: mediatek: phy-mtk-hdmi-mt8173: convert from round_rate() to determine_rate()
      phy: mediatek: phy-mtk-hdmi-mt8195: convert from round_rate() to determine_rate()
      phy: mediatek: phy-mtk-mipi-dsi-mt8173: convert from round_rate() to determine_rate()
      phy: mediatek: phy-mtk-mipi-dsi-mt8183: convert from round_rate() to determine_rate()
      phy: rockchip: phy-rockchip-inno-hdmi: convert from round_rate() to determine_rate()
      phy: rockchip: phy-rockchip-samsung-hdptx: convert from round_rate() to determine_rate()
      phy: ti: phy-j721e-wiz: convert from round_rate() to determine_rate()

 drivers/phy/freescale/phy-fsl-samsung-hdmi.c      | 13 ++++++----
 drivers/phy/mediatek/phy-mtk-hdmi-mt2701.c        |  8 +++---
 drivers/phy/mediatek/phy-mtk-hdmi-mt8173.c        | 16 ++++++------
 drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c        | 10 ++++----
 drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8173.c    | 10 +++++---
 drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c    | 10 +++++---
 drivers/phy/rockchip/phy-rockchip-inno-hdmi.c     | 30 ++++++++++++-----------
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 21 ++++++++++------
 drivers/phy/ti/phy-j721e-wiz.c                    | 11 ++++++---
 9 files changed, 73 insertions(+), 56 deletions(-)
---
base-commit: b551c4e2a98a177a06148cf16505643cd2108386
change-id: 20250710-phy-clk-round-rate-4aa7ef160fe9

Best regards,
-- 
Brian Masney <bmasney@redhat.com>


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 1/9] phy: freescale: phy-fsl-samsung-hdmi: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
index 191c282246d96e3f6c5a8d17abe078892882bf44..d010fec15671d33cc363af79e9f1c3f26ecb3464 100644
--- a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
+++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
@@ -570,17 +570,20 @@ const struct phy_config *fsl_samsung_hdmi_phy_find_settings(struct fsl_samsung_h
 	return fract_div_phy;
 }
 
-static long fsl_samsung_hdmi_phy_clk_round_rate(struct clk_hw *hw,
-						unsigned long rate, unsigned long *parent_rate)
+static int fsl_samsung_hdmi_phy_clk_determine_rate(struct clk_hw *hw,
+						   struct clk_rate_request *req)
 {
 	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
-	const struct phy_config *target_settings = fsl_samsung_hdmi_phy_find_settings(phy, rate);
+	const struct phy_config *target_settings = fsl_samsung_hdmi_phy_find_settings(phy,
+										      req->rate);
 
 	if (target_settings == NULL)
 		return -EINVAL;
 
 	dev_dbg(phy->dev, "round_rate, closest rate = %u\n", target_settings->pixclk);
-	return target_settings->pixclk;
+	req->rate = target_settings->pixclk;
+
+	return 0;
 }
 
 static int fsl_samsung_hdmi_phy_clk_set_rate(struct clk_hw *hw,
@@ -599,7 +602,7 @@ static int fsl_samsung_hdmi_phy_clk_set_rate(struct clk_hw *hw,
 
 static const struct clk_ops phy_clk_ops = {
 	.recalc_rate = phy_clk_recalc_rate,
-	.round_rate = fsl_samsung_hdmi_phy_clk_round_rate,
+	.determine_rate = fsl_samsung_hdmi_phy_clk_determine_rate,
 	.set_rate = fsl_samsung_hdmi_phy_clk_set_rate,
 };
 

-- 
2.50.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 2/9] phy: mediatek: phy-mtk-hdmi-mt2701: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/phy/mediatek/phy-mtk-hdmi-mt2701.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt2701.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt2701.c
index e51b2d13eab473dddace48c75c2a8d73c8c65635..b0b6497e7eedcb6867541b573d22156ded29a4d5 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt2701.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt2701.c
@@ -90,10 +90,10 @@ static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
 	usleep_range(80, 100);
 }
 
-static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-				    unsigned long *parent_rate)
+static int mtk_hdmi_pll_determine_rate(struct clk_hw *hw,
+				       struct clk_rate_request *req)
 {
-	return rate;
+	return 0;
 }
 
 static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -170,7 +170,7 @@ static const struct clk_ops mtk_hdmi_phy_pll_ops = {
 	.prepare = mtk_hdmi_pll_prepare,
 	.unprepare = mtk_hdmi_pll_unprepare,
 	.set_rate = mtk_hdmi_pll_set_rate,
-	.round_rate = mtk_hdmi_pll_round_rate,
+	.determine_rate = mtk_hdmi_pll_determine_rate,
 	.recalc_rate = mtk_hdmi_pll_recalc_rate,
 };
 

-- 
2.50.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 3/9] phy: mediatek: phy-mtk-hdmi-mt8173: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/phy/mediatek/phy-mtk-hdmi-mt8173.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8173.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8173.c
index d04758396046363ab9edc584ae10bf31e9c5fb0f..58c6596c8c20bdacf96a97709b8f5709f447e85b 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8173.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8173.c
@@ -118,18 +118,18 @@ static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
 	usleep_range(100, 150);
 }
 
-static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-				    unsigned long *parent_rate)
+static int mtk_hdmi_pll_determine_rate(struct clk_hw *hw,
+				       struct clk_rate_request *req)
 {
 	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
 
-	hdmi_phy->pll_rate = rate;
-	if (rate <= 74250000)
-		*parent_rate = rate;
+	hdmi_phy->pll_rate = req->rate;
+	if (req->rate <= 74250000)
+		req->best_parent_rate = req->rate;
 	else
-		*parent_rate = rate / 2;
+		req->best_parent_rate = req->rate / 2;
 
-	return rate;
+	return 0;
 }
 
 static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -223,7 +223,7 @@ static const struct clk_ops mtk_hdmi_phy_pll_ops = {
 	.prepare = mtk_hdmi_pll_prepare,
 	.unprepare = mtk_hdmi_pll_unprepare,
 	.set_rate = mtk_hdmi_pll_set_rate,
-	.round_rate = mtk_hdmi_pll_round_rate,
+	.determine_rate = mtk_hdmi_pll_determine_rate,
 	.recalc_rate = mtk_hdmi_pll_recalc_rate,
 };
 

-- 
2.50.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 4/9] phy: mediatek: phy-mtk-hdmi-mt8195: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
index b38f3ae26b3f3d8c9e73b43d86510acf6cedb471..1426a2db984d53b91125b18f7725738c44f19555 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
@@ -418,13 +418,13 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	return mtk_hdmi_pll_calc(hdmi_phy, hw, rate, parent_rate);
 }
 
-static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-				    unsigned long *parent_rate)
+static int mtk_hdmi_pll_determine_rate(struct clk_hw *hw,
+				       struct clk_rate_request *req)
 {
 	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
 
-	hdmi_phy->pll_rate = rate;
-	return rate;
+	hdmi_phy->pll_rate = req->rate;
+	return 0;
 }
 
 static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
@@ -439,7 +439,7 @@ static const struct clk_ops mtk_hdmi_pll_ops = {
 	.prepare = mtk_hdmi_pll_prepare,
 	.unprepare = mtk_hdmi_pll_unprepare,
 	.set_rate = mtk_hdmi_pll_set_rate,
-	.round_rate = mtk_hdmi_pll_round_rate,
+	.determine_rate = mtk_hdmi_pll_determine_rate,
 	.recalc_rate = mtk_hdmi_pll_recalc_rate,
 };
 

-- 
2.50.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 5/9] phy: mediatek: phy-mtk-mipi-dsi-mt8173: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8173.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8173.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8173.c
index 673cb0f08959e0e4f2b1ade2ebaf796e8b76f8bc..438ff3605d90121b7bfe02b3ddca8194437ed9ba 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8173.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8173.c
@@ -237,16 +237,18 @@ static void mtk_mipi_tx_pll_unprepare(struct clk_hw *hw)
 	mtk_phy_clear_bits(base + MIPITX_DSI_PLL_CON0, RG_DSI_MPPLL_DIV_MSK);
 }
 
-static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-				       unsigned long *prate)
+static int mtk_mipi_tx_pll_determine_rate(struct clk_hw *hw,
+					  struct clk_rate_request *req)
 {
-	return clamp_val(rate, 50000000, 1250000000);
+	req->rate = clamp_val(req->rate, 50000000, 1250000000);
+
+	return 0;
 }
 
 static const struct clk_ops mtk_mipi_tx_pll_ops = {
 	.prepare = mtk_mipi_tx_pll_prepare,
 	.unprepare = mtk_mipi_tx_pll_unprepare,
-	.round_rate = mtk_mipi_tx_pll_round_rate,
+	.determine_rate = mtk_mipi_tx_pll_determine_rate,
 	.set_rate = mtk_mipi_tx_pll_set_rate,
 	.recalc_rate = mtk_mipi_tx_pll_recalc_rate,
 };

-- 
2.50.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 6/9] phy: mediatek: phy-mtk-mipi-dsi-mt8183: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
index 553725e1269c9d7ad88f89367dfa1cf367aaf1ce..a54d44ef70ab49937d210f04fdf42300e8e5f2de 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
@@ -97,16 +97,18 @@ static void mtk_mipi_tx_pll_disable(struct clk_hw *hw)
 	mtk_phy_clear_bits(base + MIPITX_PLL_PWR, AD_DSI_PLL_SDM_PWR_ON);
 }
 
-static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-				       unsigned long *prate)
+static int mtk_mipi_tx_pll_determine_rate(struct clk_hw *hw,
+					  struct clk_rate_request *req)
 {
-	return clamp_val(rate, 125000000, 1600000000);
+	req->rate = clamp_val(req->rate, 125000000, 1600000000);
+
+	return 0;
 }
 
 static const struct clk_ops mtk_mipi_tx_pll_ops = {
 	.enable = mtk_mipi_tx_pll_enable,
 	.disable = mtk_mipi_tx_pll_disable,
-	.round_rate = mtk_mipi_tx_pll_round_rate,
+	.determine_rate = mtk_mipi_tx_pll_determine_rate,
 	.set_rate = mtk_mipi_tx_pll_set_rate,
 	.recalc_rate = mtk_mipi_tx_pll_recalc_rate,
 };

-- 
2.50.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 7/9] phy: rockchip: phy-rockchip-inno-hdmi: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 30 ++++++++++++++-------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index 8dcc2bb777b5455d21a10f06c5ad842b2ddbc834..1483907413faa5ce1dc8614db05e6e929410404d 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -749,22 +749,23 @@ unsigned long inno_hdmi_phy_rk3228_clk_recalc_rate(struct clk_hw *hw,
 	return vco;
 }
 
-static long inno_hdmi_phy_rk3228_clk_round_rate(struct clk_hw *hw,
-						unsigned long rate,
-						unsigned long *parent_rate)
+static int inno_hdmi_phy_rk3228_clk_determine_rate(struct clk_hw *hw,
+						   struct clk_rate_request *req)
 {
 	const struct pre_pll_config *cfg = pre_pll_cfg_table;
 
-	rate = (rate / 1000) * 1000;
+	req->rate = (req->rate / 1000) * 1000;
 
 	for (; cfg->pixclock != 0; cfg++)
-		if (cfg->pixclock == rate && !cfg->fracdiv)
+		if (cfg->pixclock == req->rate && !cfg->fracdiv)
 			break;
 
 	if (cfg->pixclock == 0)
 		return -EINVAL;
 
-	return cfg->pixclock;
+	req->rate = cfg->pixclock;
+
+	return 0;
 }
 
 static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw,
@@ -835,7 +836,7 @@ static const struct clk_ops inno_hdmi_phy_rk3228_clk_ops = {
 	.unprepare = inno_hdmi_phy_rk3228_clk_unprepare,
 	.is_prepared = inno_hdmi_phy_rk3228_clk_is_prepared,
 	.recalc_rate = inno_hdmi_phy_rk3228_clk_recalc_rate,
-	.round_rate = inno_hdmi_phy_rk3228_clk_round_rate,
+	.determine_rate = inno_hdmi_phy_rk3228_clk_determine_rate,
 	.set_rate = inno_hdmi_phy_rk3228_clk_set_rate,
 };
 
@@ -906,22 +907,23 @@ unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw,
 	return inno->pixclock;
 }
 
-static long inno_hdmi_phy_rk3328_clk_round_rate(struct clk_hw *hw,
-						unsigned long rate,
-						unsigned long *parent_rate)
+static int inno_hdmi_phy_rk3328_clk_determine_rate(struct clk_hw *hw,
+						   struct clk_rate_request *req)
 {
 	const struct pre_pll_config *cfg = pre_pll_cfg_table;
 
-	rate = (rate / 1000) * 1000;
+	req->rate = (req->rate / 1000) * 1000;
 
 	for (; cfg->pixclock != 0; cfg++)
-		if (cfg->pixclock == rate)
+		if (cfg->pixclock == req->rate)
 			break;
 
 	if (cfg->pixclock == 0)
 		return -EINVAL;
 
-	return cfg->pixclock;
+	req->rate = cfg->pixclock;
+
+	return 0;
 }
 
 static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw,
@@ -989,7 +991,7 @@ static const struct clk_ops inno_hdmi_phy_rk3328_clk_ops = {
 	.unprepare = inno_hdmi_phy_rk3328_clk_unprepare,
 	.is_prepared = inno_hdmi_phy_rk3328_clk_is_prepared,
 	.recalc_rate = inno_hdmi_phy_rk3328_clk_recalc_rate,
-	.round_rate = inno_hdmi_phy_rk3328_clk_round_rate,
+	.determine_rate = inno_hdmi_phy_rk3328_clk_determine_rate,
 	.set_rate = inno_hdmi_phy_rk3328_clk_set_rate,
 };
 

-- 
2.50.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 8/9] phy: rockchip: phy-rockchip-samsung-hdptx: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index 79db57ee90d1487b51f4ddadde870a275dd7b17b..f027d2caa4c2ebfc0fdec08bcebf3f415ff1a064 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -1869,8 +1869,8 @@ static unsigned long rk_hdptx_phy_clk_recalc_rate(struct clk_hw *hw,
 	return hdptx->hw_rate;
 }
 
-static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
-					unsigned long *parent_rate)
+static int rk_hdptx_phy_clk_determine_rate(struct clk_hw *hw,
+					   struct clk_rate_request *req)
 {
 	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
 
@@ -1879,14 +1879,17 @@ static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 	 * To be dropped as soon as the RK DW HDMI QP bridge driver
 	 * switches to make use of phy_configure().
 	 */
-	if (!hdptx->restrict_rate_change && rate != hdptx->hdmi_cfg.tmds_char_rate) {
+	if (!hdptx->restrict_rate_change && req->rate != hdptx->hdmi_cfg.tmds_char_rate) {
 		struct phy_configure_opts_hdmi hdmi = {
-			.tmds_char_rate = rate,
+			.tmds_char_rate = req->rate,
 		};
 		int ret = rk_hdptx_phy_verify_hdmi_config(hdptx, &hdmi);
 
-		if (ret)
-			return ret;
+		if (ret) {
+			req->rate = ret;
+
+			return 0;
+		}
 
 		hdptx->hdmi_cfg = hdmi;
 	}
@@ -1896,7 +1899,9 @@ static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 	 * hence ensure rk_hdptx_phy_clk_set_rate() won't be invoked with
 	 * a different rate argument.
 	 */
-	return hdptx->hdmi_cfg.tmds_char_rate;
+	req->rate = hdptx->hdmi_cfg.tmds_char_rate;
+
+	return 0;
 }
 
 static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -1925,7 +1930,7 @@ static const struct clk_ops hdptx_phy_clk_ops = {
 	.prepare = rk_hdptx_phy_clk_prepare,
 	.unprepare = rk_hdptx_phy_clk_unprepare,
 	.recalc_rate = rk_hdptx_phy_clk_recalc_rate,
-	.round_rate = rk_hdptx_phy_clk_round_rate,
+	.determine_rate = rk_hdptx_phy_clk_determine_rate,
 	.set_rate = rk_hdptx_phy_clk_set_rate,
 };
 

-- 
2.50.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 8/9] phy: rockchip: phy-rockchip-samsung-hdptx: convert from round_rate() to determine_rate()

[Cristian Ciocaltea]

Hi Brian,

On 7/10/25 7:07 PM, Brian Masney wrote:
> The round_rate() clk ops is deprecated, so migrate this driver from
> round_rate() to determine_rate() using the Coccinelle semantic patch
> on the cover letter of this series.
> 
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> ---
>  drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 21 +++++++++++++--------
>  1 file changed, 13 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> index 79db57ee90d1487b51f4ddadde870a275dd7b17b..f027d2caa4c2ebfc0fdec08bcebf3f415ff1a064 100644
> --- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> +++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> @@ -1869,8 +1869,8 @@ static unsigned long rk_hdptx_phy_clk_recalc_rate(struct clk_hw *hw,
>  	return hdptx->hw_rate;
>  }
>  
> -static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
> -					unsigned long *parent_rate)
> +static int rk_hdptx_phy_clk_determine_rate(struct clk_hw *hw,
> +					   struct clk_rate_request *req)
>  {
>  	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
>  
> @@ -1879,14 +1879,17 @@ static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
>  	 * To be dropped as soon as the RK DW HDMI QP bridge driver
>  	 * switches to make use of phy_configure().
>  	 */
> -	if (!hdptx->restrict_rate_change && rate != hdptx->hdmi_cfg.tmds_char_rate) {
> +	if (!hdptx->restrict_rate_change && req->rate != hdptx->hdmi_cfg.tmds_char_rate) {
>  		struct phy_configure_opts_hdmi hdmi = {
> -			.tmds_char_rate = rate,
> +			.tmds_char_rate = req->rate,
>  		};
>  		int ret = rk_hdptx_phy_verify_hdmi_config(hdptx, &hdmi);
>  
> -		if (ret)
> -			return ret;
> +		if (ret) {
> +			req->rate = ret;

This is not quite right, since "ret" is expected to contain an error number,
typically -EINVAL.

> +
> +			return 0;

We shall continue returning the error code here.

Regards,
Cristian

> +		}
>  
>  		hdptx->hdmi_cfg = hdmi;
>  	}
> @@ -1896,7 +1899,9 @@ static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
>  	 * hence ensure rk_hdptx_phy_clk_set_rate() won't be invoked with
>  	 * a different rate argument.
>  	 */
> -	return hdptx->hdmi_cfg.tmds_char_rate;
> +	req->rate = hdptx->hdmi_cfg.tmds_char_rate;
> +
> +	return 0;
>  }
>  
>  static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
> @@ -1925,7 +1930,7 @@ static const struct clk_ops hdptx_phy_clk_ops = {
>  	.prepare = rk_hdptx_phy_clk_prepare,
>  	.unprepare = rk_hdptx_phy_clk_unprepare,
>  	.recalc_rate = rk_hdptx_phy_clk_recalc_rate,
> -	.round_rate = rk_hdptx_phy_clk_round_rate,
> +	.determine_rate = rk_hdptx_phy_clk_determine_rate,
>  	.set_rate = rk_hdptx_phy_clk_set_rate,
>  };
>  
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 9/9] phy: ti: phy-j721e-wiz: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
 drivers/phy/ti/phy-j721e-wiz.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
index ab2a4f2c0a5bf3aa4b77045f4da8b0ddcc079f7a..12dafb2bd49bc33c13dd49246bc26df082e3dd40 100644
--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -934,12 +934,15 @@ static unsigned long wiz_clk_div_recalc_rate(struct clk_hw *hw,
 	return divider_recalc_rate(hw, parent_rate, val, div->table, 0x0, 2);
 }
 
-static long wiz_clk_div_round_rate(struct clk_hw *hw, unsigned long rate,
-				   unsigned long *prate)
+static int wiz_clk_div_determine_rate(struct clk_hw *hw,
+				      struct clk_rate_request *req)
 {
 	struct wiz_clk_divider *div = to_wiz_clk_div(hw);
 
-	return divider_round_rate(hw, rate, prate, div->table, 2, 0x0);
+	req->rate = divider_round_rate(hw, req->rate, &req->best_parent_rate,
+				       div->table, 2, 0x0);
+
+	return 0;
 }
 
 static int wiz_clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -958,7 +961,7 @@ static int wiz_clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
 
 static const struct clk_ops wiz_clk_div_ops = {
 	.recalc_rate = wiz_clk_div_recalc_rate,
-	.round_rate = wiz_clk_div_round_rate,
+	.determine_rate = wiz_clk_div_determine_rate,
 	.set_rate = wiz_clk_div_set_rate,
 };
 

-- 
2.50.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy