From: Peng Fan <peng.fan@nxp.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Aswath Govindraju <a-govindraju@ti.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Frank Li <frank.li@nxp.com>,
Haibo Chen <haibo.chen@nxp.com>
Cc: linux-can@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Peng Fan <peng.fan@nxp.com>, Frank Li <Frank.Li@nxp.com>
Subject: [PATCH v4 2/6] phy: phy-can-transceiver: Introduce can_transceiver_priv
Date: Mon, 01 Sep 2025 11:18:12 +0800 [thread overview]
Message-ID: <20250901-can-v4-2-e42b5fe2cf9e@nxp.com> (raw)
In-Reply-To: <20250901-can-v4-0-e42b5fe2cf9e@nxp.com>
To prepare for dual-channel phy support, introduce can_transceiver_priv as
a higher level encapsulation for phy and mux_state.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/phy/phy-can-transceiver.c | 41 ++++++++++++++++++++++++++-------------
1 file changed, 27 insertions(+), 14 deletions(-)
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index f59caff4b3d4c267feca4220bf1547b6fad08f95..6415c6af0e8414a6cc8d15958a17ee749a3f28e9 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -23,6 +23,11 @@ struct can_transceiver_phy {
struct phy *generic_phy;
struct gpio_desc *standby_gpio;
struct gpio_desc *enable_gpio;
+ struct can_transceiver_priv *priv;
+};
+
+struct can_transceiver_priv {
+ struct can_transceiver_phy *can_transceiver_phy;
struct mux_state *mux_state;
};
@@ -32,8 +37,8 @@ static int can_transceiver_phy_power_on(struct phy *phy)
struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
int ret;
- if (can_transceiver_phy->mux_state) {
- ret = mux_state_select(can_transceiver_phy->mux_state);
+ if (can_transceiver_phy->priv->mux_state) {
+ ret = mux_state_select(can_transceiver_phy->priv->mux_state);
if (ret) {
dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret);
return ret;
@@ -56,8 +61,8 @@ static int can_transceiver_phy_power_off(struct phy *phy)
gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
if (can_transceiver_phy->enable_gpio)
gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
- if (can_transceiver_phy->mux_state)
- mux_state_deselect(can_transceiver_phy->mux_state);
+ if (can_transceiver_phy->priv->mux_state)
+ mux_state_deselect(can_transceiver_phy->priv->mux_state);
return 0;
}
@@ -107,7 +112,7 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct device *dev = &pdev->dev;
- struct can_transceiver_phy *can_transceiver_phy;
+ struct can_transceiver_priv *priv;
const struct can_transceiver_data *drvdata;
const struct of_device_id *match;
struct phy *phy;
@@ -117,18 +122,25 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
u32 max_bitrate = 0;
int err;
- can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy), GFP_KERNEL);
- if (!can_transceiver_phy)
- return -ENOMEM;
-
match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
drvdata = match->data;
+ priv = devm_kzalloc(dev, sizeof(struct can_transceiver_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+
+ priv->can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy),
+ GFP_KERNEL);
+ if (!priv->can_transceiver_phy)
+ return -ENOMEM;
+
mux_state = devm_mux_state_get_optional(dev, NULL);
if (IS_ERR(mux_state))
return PTR_ERR(mux_state);
- can_transceiver_phy->mux_state = mux_state;
+ priv->mux_state = mux_state;
phy = devm_phy_create(dev, dev->of_node,
&can_transceiver_phy_ops);
@@ -142,23 +154,24 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
dev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n");
phy->attrs.max_link_rate = max_bitrate;
- can_transceiver_phy->generic_phy = phy;
+ priv->can_transceiver_phy->generic_phy = phy;
+ priv->can_transceiver_phy->priv = priv;
if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) {
standby_gpio = devm_gpiod_get_optional(dev, "standby", GPIOD_OUT_HIGH);
if (IS_ERR(standby_gpio))
return PTR_ERR(standby_gpio);
- can_transceiver_phy->standby_gpio = standby_gpio;
+ priv->can_transceiver_phy->standby_gpio = standby_gpio;
}
if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) {
enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(enable_gpio))
return PTR_ERR(enable_gpio);
- can_transceiver_phy->enable_gpio = enable_gpio;
+ priv->can_transceiver_phy->enable_gpio = enable_gpio;
}
- phy_set_drvdata(can_transceiver_phy->generic_phy, can_transceiver_phy);
+ phy_set_drvdata(priv->can_transceiver_phy->generic_phy, priv->can_transceiver_phy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
--
2.37.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2025-09-01 3:43 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-01 3:18 [PATCH v4 0/6] phy: phy-can-transceiver: Support TJA1048/TJA1051 Peng Fan
2025-09-01 3:18 ` [PATCH v4 1/6] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA105X/1048 Peng Fan
2025-09-01 18:54 ` Conor Dooley
2025-09-01 19:00 ` Conor Dooley
2025-09-02 2:24 ` Peng Fan
2025-09-02 19:31 ` Conor Dooley
2025-09-03 6:00 ` Peng Fan
2025-09-03 6:49 ` Peng Fan
2025-09-03 16:25 ` Conor Dooley
2025-09-01 3:18 ` Peng Fan [this message]
2025-09-01 3:18 ` [PATCH v4 3/6] phy: phy-can-transceiver: Add dual channel support for TJA1048 Peng Fan
2025-09-01 3:18 ` [PATCH v4 4/6] arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply Peng Fan
2025-09-01 3:18 ` [PATCH v4 5/6] arm64: dts: imx8mp-evk: " Peng Fan
2025-09-01 3:18 ` [PATCH v4 6/6] arm64: dts: imx93-11x11-evk: " Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250901-can-v4-2-e42b5fe2cf9e@nxp.com \
--to=peng.fan@nxp.com \
--cc=a-govindraju@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frank.li@nxp.com \
--cc=haibo.chen@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=mkl@pengutronix.de \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).