[PATCH] phy: qcom-qmp-usb: Set regulator load before enabling

From: Faisal Hassan <faisal.hassan@oss.qualcomm.com>
To: Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
	Krishna Kurapati <quic_kriskura@quicinc.com>,
	Johan Hovold <johan+linaro@kernel.org>,
	Chenyuan Yang <chenyuan0y@gmail.com>,
	Varadarajan Narayanan <quic_varada@quicinc.com>,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Faisal Hassan <faisal.hassan@oss.qualcomm.com>
Subject: [PATCH] phy: qcom-qmp-usb: Set regulator load before enabling
Date: Fri,  5 Sep 2025 15:42:43 +0530	[thread overview]
Message-ID: <20250905101243.14815-1-faisal.hassan@oss.qualcomm.com> (raw)

Set the regulator load before enabling the regulators to ensure stable
operation and proper power management on platforms where regulators are
shared between the QMP USB PHY and other IP blocks.

Introduce a regulator data structure with explicit enable load values and
use the regulator framework's `init_load_uA` field along with
`devm_regulator_bulk_get_const()` to ensure that `regulator_set_load()` is
applied automatically before the first enable, providing consistent power
management behavior across platforms.

Signed-off-by: Faisal Hassan <faisal.hassan@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 27 ++++++-------------------
 1 file changed, 6 insertions(+), 21 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index ed646a7e705b..8bc2dc975870 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -1266,7 +1266,7 @@ struct qmp_phy_cfg {
 	int pcs_usb_tbl_num;
 
 	/* regulators to be requested */
-	const char * const *vreg_list;
+	const struct regulator_bulk_data *vreg_list;
 	int num_vregs;
 
 	/* array of registers with different offsets */
@@ -1344,8 +1344,9 @@ static const char * const usb3phy_reset_l[] = {
 };
 
 /* list of regulators */
-static const char * const qmp_phy_vreg_l[] = {
-	"vdda-phy", "vdda-pll",
+static const struct regulator_bulk_data qmp_phy_vreg_l[] = {
+	{ .supply = "vdda-phy", .init_load_uA = 21800, },
+	{ .supply = "vdda-pll", .init_load_uA = 36000, },
 };
 
 static const struct qmp_usb_offsets qmp_usb_offsets_v3 = {
@@ -1986,23 +1987,6 @@ static const struct dev_pm_ops qmp_usb_pm_ops = {
 			   qmp_usb_runtime_resume, NULL)
 };
 
-static int qmp_usb_vreg_init(struct qmp_usb *qmp)
-{
-	const struct qmp_phy_cfg *cfg = qmp->cfg;
-	struct device *dev = qmp->dev;
-	int num = cfg->num_vregs;
-	int i;
-
-	qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
-	if (!qmp->vregs)
-		return -ENOMEM;
-
-	for (i = 0; i < num; i++)
-		qmp->vregs[i].supply = cfg->vreg_list[i];
-
-	return devm_regulator_bulk_get(dev, num, qmp->vregs);
-}
-
 static int qmp_usb_reset_init(struct qmp_usb *qmp,
 			      const char *const *reset_list,
 			      int num_resets)
@@ -2251,7 +2235,8 @@ static int qmp_usb_probe(struct platform_device *pdev)
 	if (!qmp->cfg)
 		return -EINVAL;
 
-	ret = qmp_usb_vreg_init(qmp);
+	ret = devm_regulator_bulk_get_const(dev, qmp->cfg->num_vregs,
+					qmp->cfg->vreg_list, &qmp->vregs);
 	if (ret)
 		return ret;
 
-- 
2.17.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
