[PATCH v4 0/3] Add driver support for Eswin EIC7700 SoC SATA Controller and PHY

[PATCH v4 0/3] Add driver support for Eswin EIC7700 SoC SATA Controller and PHY

[Yulin Lu]

This series depends on the config option patch [1].

[1] https://lore.kernel.org/all/20250825132427.1618089-3-pinkesh.vaghela@einfochips.com/

Updates:
  v4 -> v3:
    - eswin,eic7700-ahci.yaml
      - Fix grammatical errors in patch subject and commit message
      - Add an explanation in the commit message of patch 1 for retaining the
        "ports-implemented" field, which Rob Herring suggested to remove
        in the review comments on v2.
        Link to Rob Herring's review:
        https://lore.kernel.org/lkml/CAL_JsqKFotNLZZXwiy7S6K8qXLdGRAnsa-1zvZRDQBE39Gf5kg@mail.gmail.com/
        Link to my question and Niklas Cassel's reply:
        https://lore.kernel.org/lkml/aLBUC116MdJqDGIJ@flawful.org/
        In this reply, Niklas Cassel mentioned his view:
        If the ports-implemented register gets reset from
        ahci_platform_assert_rsts(), then it seems acceptable to
        retain the ports-implemented property in the device tree.
        This aligns with our design.
        Link to my reply:
        https://lore.kernel.org/lkml/4ab70c6a.8be.198f47da494.Coremail.luyulin@eswincomputing.com/
        Link to Niklas Cassel's question and my further explanation:
        https://lore.kernel.org/lkml/aLlYkZWBaI5Yz6fo@ryzen/
        https://lore.kernel.org/lkml/7206383a.d98.19918c22570.Coremail.luyulin@eswincomputing.com/
    - eswin,eic7700-sata-phy.yaml
      - Fix grammatical errors in patch subject and commit message
      - Adjust the position of reg in the properties and required arrays
      - Add reviewed-by tag of Krzysztof Kozlowski
    - phy-eic7700-sata.c
      - Correct the loop condition in wait_for_phy_ready() to use the current
        jiffies instead of the fixed start time
      - Change the return value from -EFAULT to -ETIMEDOUT to correctly
        indicate a timeout condition
      - Remove redundant clock disable handling in probe error path, as
        SATA_SYS_CLK_EN is managed in phy_init() and phy_exit()
      - Use dev_err_probe return in probe
      - Reorder local variables to follow reverse Xmas tree order
      - Wrap each line in the extended comments to 80 columns before splitting lines
      - Adjust the position of `#include <linux/io.h>` for proper ordering
    - Link to v3: https://lore.kernel.org/lkml/20250904063427.1954-1-luyulin@eswincomputing.com/

  v2 -> v3:
    - Use full name in "From" and "Signed-off-by" fields information
    - eswin,eic7700-ahci.yaml
      - Remove the introduction to the reg, interrupts, phys, and phy-names fields
      - Modify the usage of the clocks field in the examples
      - Correct the order of dt properties
    - phy-eic7700-sata.c
      - Register operations use the GENMASK macro and FIELD_PREP instead of
        the original bit offset method, and add "#include <linux/bitfield.h>"
      - Modify some macro definition names.
      - Remove the redundant initialization assignments for "ret" and "val"
      - Delete ".suppress_bind_attrs = true"
      - Modify the driver name
      - Add "#include <linux/io.h>" to fix the robot test issue
    - Link to v2: https://lore.kernel.org/lkml/20250819134722.220-1-luyulin@eswincomputing.com/

  v2 -> v1:
    - Delete the original controller driver and use ahci_dwc.c instead
    - Add eswin,eic7700-ahci.yaml
      - Correct the descriptions of reset, interrupt and other
        hardware resources for the sata controller on EIC7700 SoC
      - The clocks for both sata controller and sata PHY are controlled
        via a register bit in the HSP bus and are not registered in the
        clock tree. Clock are managed within the PHY driver, therefore
        it is not described in this document
      - Add $ref: snps,dwc-ahci-common.yaml#.
    - Add eswin,eic7700-sata-phy.yaml
      - Add this file to include the description of the PHY on EIC7700 SoC
    - Add an eswin directory under the PHY driver path, and include the SATA
      PHY driver code for EIC7700 SoC
    - Link to v1: https://lore.kernel.org/all/20250515085114.1692-1-hehuan1@eswincomputing.com/

Yulin Lu (3):
  Document the EIC7700 SoC sata ahci
  dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHY
  phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver

 .../bindings/ata/eswin,eic7700-ahci.yaml      |  79 +++++++
 .../bindings/phy/eswin,eic7700-sata-phy.yaml  |  36 ++++
 drivers/phy/Kconfig                           |   1 +
 drivers/phy/Makefile                          |   1 +
 drivers/phy/eswin/Kconfig                     |  14 ++
 drivers/phy/eswin/Makefile                    |   2 +
 drivers/phy/eswin/phy-eic7700-sata.c          | 192 ++++++++++++++++++
 7 files changed, 325 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml
 create mode 100644 drivers/phy/eswin/Kconfig
 create mode 100644 drivers/phy/eswin/Makefile
 create mode 100644 drivers/phy/eswin/phy-eic7700-sata.c

-- 
2.25.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 1/3] Document the EIC7700 SoC sata ahci

[Yulin Lu]

Document the SATA AHCI controller on the EIC7700 SoC platform,
including descriptions of its hardware configurations.

Retains the "ports-implemented" property in the DTS, because
removing it and relying only on the firmware register causes
problems. If the property is not present and we remove the
module using `rmmod`, a reset is triggered that clears the
register. As a result, inserting module again using `insmod`
will lead to errors.

The detailed reasons are that the ports-implemented register is
configured by the firmware (U-Boot on the HiFive Premier P550 board)
before kernel entry and correctly set to 0x1. During probe,
ahci_platform_enable_resources() -> ahci_platform_deassert_rsts() is
called, and when the driver is removed,
ahci_platform_disable_resources() -> ahci_platform_assert_rsts() is
called. This reset clears the register, which is defined by the IP
databook to reset to 0.

Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
---
 .../bindings/ata/eswin,eic7700-ahci.yaml      | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml

diff --git a/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml b/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml
new file mode 100644
index 000000000000..40c44f0705ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/eswin,eic7700-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eswin EIC7700 SoC SATA Controller
+
+maintainers:
+  - Yulin Lu <luyulin@eswincomputing.com>
+  - Huan He <hehuan1@eswincomputing.com>
+
+description:
+  AHCI SATA controller embedded into the EIC7700 SoC
+  is based on the DWC AHCI SATA v5.00a IP core.
+
+select:
+  properties:
+    compatible:
+      const: eswin,eic7700-ahci
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: eswin,eic7700-ahci
+      - const: snps,dwc-ahci
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: arst
+
+  ports-implemented:
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - ports-implemented
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@50420000 {
+        compatible = "eswin,eic7700-ahci", "snps,dwc-ahci";
+        reg = <0x50420000 0x10000>;
+        interrupt-parent = <&plic>;
+        interrupts = <58>;
+        clocks = <&clock 171>, <&clock 186>;
+        clock-names = "pclk", "aclk";
+        phys = <&sata_phy>;
+        phy-names = "sata-phy";
+        ports-implemented = <0x1>;
+        resets = <&reset 96>;
+        reset-names = "arst";
+    };
-- 
2.25.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 1/3] Document the EIC7700 SoC sata ahci

[Rob Herring]

On Mon, Sep 15, 2025 at 09:01:35PM +0800, Yulin Lu wrote:
> Document the SATA AHCI controller on the EIC7700 SoC platform,
> including descriptions of its hardware configurations.

Please fix the subject: "dt-bindings: ata: ..."

> 
> Retains the "ports-implemented" property in the DTS, because
> removing it and relying only on the firmware register causes
> problems. If the property is not present and we remove the
> module using `rmmod`, a reset is triggered that clears the
> register. As a result, inserting module again using `insmod`
> will lead to errors.
> 
> The detailed reasons are that the ports-implemented register is
> configured by the firmware (U-Boot on the HiFive Premier P550 board)
> before kernel entry and correctly set to 0x1. During probe,
> ahci_platform_enable_resources() -> ahci_platform_deassert_rsts() is
> called, and when the driver is removed,
> ahci_platform_disable_resources() -> ahci_platform_assert_rsts() is
> called. This reset clears the register, which is defined by the IP
> databook to reset to 0.
> 
> Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
> ---
>  .../bindings/ata/eswin,eic7700-ahci.yaml      | 79 +++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml
> 
> diff --git a/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml b/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml
> new file mode 100644
> index 000000000000..40c44f0705ba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ata/eswin,eic7700-ahci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Eswin EIC7700 SoC SATA Controller
> +
> +maintainers:
> +  - Yulin Lu <luyulin@eswincomputing.com>
> +  - Huan He <hehuan1@eswincomputing.com>
> +
> +description:
> +  AHCI SATA controller embedded into the EIC7700 SoC
> +  is based on the DWC AHCI SATA v5.00a IP core.

Wrap at 80 chars.

> +
> +select:
> +  properties:
> +    compatible:
> +      const: eswin,eic7700-ahci
> +  required:
> +    - compatible
> +
> +allOf:
> +  - $ref: snps,dwc-ahci-common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: eswin,eic7700-ahci
> +      - const: snps,dwc-ahci
> +
> +  clocks:
> +    minItems: 2
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: pclk
> +      - const: aclk
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    const: arst
> +
> +  ports-implemented:
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - phys
> +  - phy-names
> +  - ports-implemented
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    sata@50420000 {
> +        compatible = "eswin,eic7700-ahci", "snps,dwc-ahci";
> +        reg = <0x50420000 0x10000>;
> +        interrupt-parent = <&plic>;
> +        interrupts = <58>;
> +        clocks = <&clock 171>, <&clock 186>;
> +        clock-names = "pclk", "aclk";
> +        phys = <&sata_phy>;
> +        phy-names = "sata-phy";
> +        ports-implemented = <0x1>;
> +        resets = <&reset 96>;
> +        reset-names = "arst";
> +    };
> -- 
> 2.25.1
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: Re: [PATCH v4 1/3] Document the EIC7700 SoC sata ahci

[luyulin]

Hi, Rob Herring

Thank you for your review and comments.
> 
> On Mon, Sep 15, 2025 at 09:01:35PM +0800, Yulin Lu wrote:
> > Document the SATA AHCI controller on the EIC7700 SoC platform,
> > including descriptions of its hardware configurations.
> 
> Please fix the subject: "dt-bindings: ata: ..."
> 

I previously noticed this subject issue, then resubmitted v4
and explained the reason in the cover letter.
The links to these patches are:
https://lore.kernel.org/lkml/20250915135138.877-1-luyulin@eswincomputing.com/

> > 
...
> > +description:
> > +  AHCI SATA controller embedded into the EIC7700 SoC
> > +  is based on the DWC AHCI SATA v5.00a IP core.
> 
> Wrap at 80 chars.
> 

Thanks, I will fix it in the next patch.

> > +
...
> > -- 
> > 2.25.1
> > 
Best regards,
Yulin Lu
-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 2/3] dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHY

[Yulin Lu]

Document the SATA PHY on the EIC7700 SoC platform,
describing its usage.

Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/phy/eswin,eic7700-sata-phy.yaml  | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml b/Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml
new file mode 100644
index 000000000000..439633827153
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/eswin,eic7700-sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eswin EIC7700 SoC SATA PHY
+
+maintainers:
+  - Yulin Lu <luyulin@eswincomputing.com>
+  - Huan He <hehuan1@eswincomputing.com>
+
+properties:
+  compatible:
+    const: eswin,eic7700-sata-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    sata-phy@50440300 {
+        compatible = "eswin,eic7700-sata-phy";
+        reg = <0x50440300 0x40>;
+        #phy-cells = <0>;
+    };
-- 
2.25.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 3/3] phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver

[Yulin Lu]

Created the eswin phy driver directory and added support for
the SATA phy driver on the EIC7700 SoC platform.

Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
---
 drivers/phy/Kconfig                  |   1 +
 drivers/phy/Makefile                 |   1 +
 drivers/phy/eswin/Kconfig            |  14 ++
 drivers/phy/eswin/Makefile           |   2 +
 drivers/phy/eswin/phy-eic7700-sata.c | 192 +++++++++++++++++++++++++++
 5 files changed, 210 insertions(+)
 create mode 100644 drivers/phy/eswin/Kconfig
 create mode 100644 drivers/phy/eswin/Makefile
 create mode 100644 drivers/phy/eswin/phy-eic7700-sata.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 58c911e1b2d2..e82ebcfe534a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -105,6 +105,7 @@ source "drivers/phy/allwinner/Kconfig"
 source "drivers/phy/amlogic/Kconfig"
 source "drivers/phy/broadcom/Kconfig"
 source "drivers/phy/cadence/Kconfig"
+source "drivers/phy/eswin/Kconfig"
 source "drivers/phy/freescale/Kconfig"
 source "drivers/phy/hisilicon/Kconfig"
 source "drivers/phy/ingenic/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index c670a8dac468..ed7444949259 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -17,6 +17,7 @@ obj-y					+= allwinner/	\
 					   amlogic/	\
 					   broadcom/	\
 					   cadence/	\
+					   eswin/	\
 					   freescale/	\
 					   hisilicon/	\
 					   ingenic/	\
diff --git a/drivers/phy/eswin/Kconfig b/drivers/phy/eswin/Kconfig
new file mode 100644
index 000000000000..3fcd76582c3b
--- /dev/null
+++ b/drivers/phy/eswin/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Eswin platforms
+#
+config PHY_EIC7700_SATA
+	tristate "eic7700 Sata SerDes/PHY driver"
+	depends on ARCH_ESWIN || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support SerDes/Phy found on ESWIN's
+	  EIC7700 SoC.This Phy supports SATA 1.5 Gb/s,
+	  SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds.
+	  It supports one SATA host port to accept one SATA device.
diff --git a/drivers/phy/eswin/Makefile b/drivers/phy/eswin/Makefile
new file mode 100644
index 000000000000..db08c66be812
--- /dev/null
+++ b/drivers/phy/eswin/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_EIC7700_SATA)	+= phy-eic7700-sata.o
diff --git a/drivers/phy/eswin/phy-eic7700-sata.c b/drivers/phy/eswin/phy-eic7700-sata.c
new file mode 100644
index 000000000000..19b7ddf2583f
--- /dev/null
+++ b/drivers/phy/eswin/phy-eic7700-sata.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ESWIN SATA PHY driver
+ *
+ * Copyright 2024, Beijing ESWIN Computing Technology Co., Ltd..
+ * All rights reserved.
+ *
+ * Authors: Yulin Lu <luyulin@eswincomputing.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define SATA_CLK_CTRL				0x0
+#define SATA_AXI_LP_CTRL			0x08
+#define SATA_MPLL_CTRL				0x20
+#define SATA_P0_PHY_STAT			0x24
+#define SATA_PHY_CTRL0				0x28
+#define SATA_PHY_CTRL1				0x2c
+#define SATA_REG_CTRL				0x34
+#define SATA_REF_CTRL1				0x38
+#define SATA_LOS_IDEN				0x3c
+#define SATA_RESET_CTRL				0x40
+
+#define SATA_SYS_CLK_EN				BIT(28)
+#define SATA_PHY_RESET				BIT(0)
+#define SATA_PORT_RESET				BIT(1)
+#define SATA_CLK_RST_SOURCE_PHY			BIT(0)
+#define SATA_P0_PHY_TX_AMPLITUDE_GEN1_MASK	GENMASK(6, 0)
+#define SATA_P0_PHY_TX_AMPLITUDE_GEN2_MASK	GENMASK(14, 8)
+#define SATA_P0_PHY_TX_AMPLITUDE_GEN3_MASK	GENMASK(22, 16)
+#define SATA_P0_PHY_TX_PREEMPH_GEN1_MASK	GENMASK(5, 0)
+#define SATA_P0_PHY_TX_PREEMPH_GEN2_MASK	GENMASK(13, 8)
+#define SATA_P0_PHY_TX_PREEMPH_GEN3_MASK	GENMASK(21, 16)
+#define SATA_LOS_LEVEL_MASK			GENMASK(4, 0)
+#define SATA_LOS_BIAS_MASK			GENMASK(18, 16)
+#define SATA_M_CSYSREQ				BIT(0)
+#define SATA_S_CSYSREQ				BIT(16)
+#define SATA_REF_REPEATCLK_EN			BIT(0)
+#define SATA_REF_USE_PAD			BIT(20)
+#define SATA_MPLL_MULTIPLIER_MASK		GENMASK(22, 16)
+#define SATA_P0_PHY_READY			BIT(0)
+
+#define PHY_READY_TIMEOUT			(usecs_to_jiffies(4000))
+
+struct eic7700_sata_phy {
+	void __iomem *regs;
+	struct phy *phy;
+};
+
+static int wait_for_phy_ready(void __iomem *base, u32 reg, u32 checkbit,
+			      u32 status)
+{
+	unsigned long timeout = jiffies + PHY_READY_TIMEOUT;
+
+	while (time_before(jiffies, timeout)) {
+		if ((readl(base + reg) & checkbit) == status)
+			return 0;
+		usleep_range(50, 70);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int eic7700_sata_phy_init(struct phy *phy)
+{
+	struct eic7700_sata_phy *sata_phy = phy_get_drvdata(phy);
+	u32 val;
+	int ret;
+
+	/*
+	 * The SATA_CLK_CTRL register offset controls the pmalive, rxoob, and
+	 * rbc clocks gate provided by the PHY through the HSP bus, and it is
+	 * not registered in the clock tree.
+	 */
+	val = readl(sata_phy->regs + SATA_CLK_CTRL);
+	val |= SATA_SYS_CLK_EN;
+	writel(val, sata_phy->regs + SATA_CLK_CTRL);
+
+	writel(SATA_CLK_RST_SOURCE_PHY, sata_phy->regs + SATA_REF_CTRL1);
+	writel(FIELD_PREP(SATA_P0_PHY_TX_AMPLITUDE_GEN1_MASK, 0x42) |
+	       FIELD_PREP(SATA_P0_PHY_TX_AMPLITUDE_GEN2_MASK, 0x46) |
+	       FIELD_PREP(SATA_P0_PHY_TX_AMPLITUDE_GEN3_MASK, 0x73),
+	       sata_phy->regs + SATA_PHY_CTRL0);
+	writel(FIELD_PREP(SATA_P0_PHY_TX_PREEMPH_GEN1_MASK, 0x5) |
+	       FIELD_PREP(SATA_P0_PHY_TX_PREEMPH_GEN2_MASK, 0x5) |
+	       FIELD_PREP(SATA_P0_PHY_TX_PREEMPH_GEN3_MASK, 0x8),
+	       sata_phy->regs + SATA_PHY_CTRL1);
+	writel(FIELD_PREP(SATA_LOS_LEVEL_MASK, 0x9) |
+	       FIELD_PREP(SATA_LOS_BIAS_MASK, 0x2),
+	       sata_phy->regs + SATA_LOS_IDEN);
+	writel(SATA_M_CSYSREQ | SATA_S_CSYSREQ,
+	       sata_phy->regs + SATA_AXI_LP_CTRL);
+	writel(SATA_REF_REPEATCLK_EN | SATA_REF_USE_PAD,
+	       sata_phy->regs + SATA_REG_CTRL);
+	writel(FIELD_PREP(SATA_MPLL_MULTIPLIER_MASK, 0x3c),
+	       sata_phy->regs + SATA_MPLL_CTRL);
+	usleep_range(15, 20);
+
+	/*
+	 * The SATA_RESET_CTRL register offset controls reset/deassert for both
+	 * the port and the PHY through the HSP bus, and it is not registered
+	 * in the reset tree.
+	 */
+	val = readl(sata_phy->regs + SATA_RESET_CTRL);
+	val &= ~(SATA_PHY_RESET | SATA_PORT_RESET);
+	writel(val, sata_phy->regs + SATA_RESET_CTRL);
+
+	ret = wait_for_phy_ready(sata_phy->regs, SATA_P0_PHY_STAT,
+				 SATA_P0_PHY_READY, 1);
+	if (ret < 0)
+		dev_err(&sata_phy->phy->dev,
+			"PHY READY check failed\n");
+	return ret;
+}
+
+static int eic7700_sata_phy_exit(struct phy *phy)
+{
+	struct eic7700_sata_phy *sata_phy = phy_get_drvdata(phy);
+	u32 val;
+
+	val = readl(sata_phy->regs + SATA_RESET_CTRL);
+	val |= SATA_PHY_RESET | SATA_PORT_RESET;
+	writel(val, sata_phy->regs + SATA_RESET_CTRL);
+
+	val = readl(sata_phy->regs + SATA_CLK_CTRL);
+	val &= ~SATA_SYS_CLK_EN;
+	writel(val, sata_phy->regs + SATA_CLK_CTRL);
+
+	return 0;
+}
+
+static const struct phy_ops eic7700_sata_phy_ops = {
+	.init		= eic7700_sata_phy_init,
+	.exit		= eic7700_sata_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int eic7700_sata_phy_probe(struct platform_device *pdev)
+{
+	struct eic7700_sata_phy *sata_phy;
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+
+	sata_phy = devm_kzalloc(dev, sizeof(*sata_phy), GFP_KERNEL);
+	if (!sata_phy)
+		return -ENOMEM;
+
+	sata_phy->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(sata_phy->regs))
+		return PTR_ERR(sata_phy->regs);
+
+	dev_set_drvdata(dev, sata_phy);
+
+	sata_phy->phy = devm_phy_create(dev, NULL, &eic7700_sata_phy_ops);
+	if (IS_ERR(sata_phy->phy))
+		return dev_err_probe(dev, PTR_ERR(sata_phy->phy),
+				     "failed to create PHY\n");
+
+	phy_set_drvdata(sata_phy->phy, sata_phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return dev_err_probe(dev, PTR_ERR(phy_provider),
+				     "failed to register PHY provider\n");
+
+	return 0;
+}
+
+static const struct of_device_id eic7700_sata_phy_of_match[] = {
+	{ .compatible = "eswin,eic7700-sata-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, eic7700_sata_phy_of_match);
+
+static struct platform_driver eic7700_sata_phy_driver = {
+	.probe	= eic7700_sata_phy_probe,
+	.driver = {
+		.of_match_table	= eic7700_sata_phy_of_match,
+		.name  = "eic7700-sata-phy",
+	}
+};
+module_platform_driver(eic7700_sata_phy_driver);
+
+MODULE_DESCRIPTION("SATA PHY driver for the ESWIN EIC7700 SoC");
+MODULE_AUTHOR("Yulin Lu <luyulin@eswincomputing.com>");
+MODULE_LICENSE("GPL");
-- 
2.25.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 0/3] Add driver support for Eswin EIC7700 SoC SATA Controller and PHY

[Yulin Lu]

This series depends on the config option patch [1].

[1] https://lore.kernel.org/all/20250825132427.1618089-3-pinkesh.vaghela@einfochips.com/

Updates:
  v4 (resend):
    - Fix patch 1/3 subject prefix: add missing "dt-bindings: ata:"

  v4 -> v3:
    - eswin,eic7700-ahci.yaml
      - Fix grammatical errors in patch subject and commit message
      - Add an explanation in the commit message of patch 1 for retaining the
        "ports-implemented" field, which Rob Herring suggested to remove
        in the review comments on v2.
        Link to Rob Herring's review:
        https://lore.kernel.org/lkml/CAL_JsqKFotNLZZXwiy7S6K8qXLdGRAnsa-1zvZRDQBE39Gf5kg@mail.gmail.com/
        Link to my question and Niklas Cassel's reply:
        https://lore.kernel.org/lkml/aLBUC116MdJqDGIJ@flawful.org/
        In this reply, Niklas Cassel mentioned his view:
        If the ports-implemented register gets reset from
        ahci_platform_assert_rsts(), then it seems acceptable to
        retain the ports-implemented property in the device tree.
        This aligns with our design.
        Link to my reply:
        https://lore.kernel.org/lkml/4ab70c6a.8be.198f47da494.Coremail.luyulin@eswincomputing.com/
        Link to Niklas Cassel's question and my further explanation:
        https://lore.kernel.org/lkml/aLlYkZWBaI5Yz6fo@ryzen/
        https://lore.kernel.org/lkml/7206383a.d98.19918c22570.Coremail.luyulin@eswincomputing.com/
    - eswin,eic7700-sata-phy.yaml
      - Fix grammatical errors in patch subject and commit message
      - Adjust the position of reg in the properties and required arrays
      - Add reviewed-by tag of Krzysztof Kozlowski
    - phy-eic7700-sata.c
      - Correct the loop condition in wait_for_phy_ready() to use the current
        jiffies instead of the fixed start time
      - Change the return value from -EFAULT to -ETIMEDOUT to correctly
        indicate a timeout condition
      - Remove redundant clock disable handling in probe error path, as
        SATA_SYS_CLK_EN is managed in phy_init() and phy_exit()
      - Use dev_err_probe return in probe
      - Reorder local variables to follow reverse Xmas tree order
      - Wrap each line in the extended comments to 80 columns before splitting lines
      - Adjust the position of `#include <linux/io.h>` for proper ordering
    - Link to v3: https://lore.kernel.org/lkml/20250904063427.1954-1-luyulin@eswincomputing.com/

  v2 -> v3:
    - Use full name in "From" and "Signed-off-by" fields information
    - eswin,eic7700-ahci.yaml
      - Remove the introduction to the reg, interrupts, phys, and phy-names fields
      - Modify the usage of the clocks field in the examples
      - Correct the order of dt properties
    - phy-eic7700-sata.c
      - Register operations use the GENMASK macro and FIELD_PREP instead of
        the original bit offset method, and add "#include <linux/bitfield.h>"
      - Modify some macro definition names.
      - Remove the redundant initialization assignments for "ret" and "val"
      - Delete ".suppress_bind_attrs = true"
      - Modify the driver name
      - Add "#include <linux/io.h>" to fix the robot test issue
    - Link to v2: https://lore.kernel.org/lkml/20250819134722.220-1-luyulin@eswincomputing.com/

  v2 -> v1:
    - Delete the original controller driver and use ahci_dwc.c instead
    - Add eswin,eic7700-ahci.yaml
      - Correct the descriptions of reset, interrupt and other
        hardware resources for the sata controller on EIC7700 SoC
      - The clocks for both sata controller and sata PHY are controlled
        via a register bit in the HSP bus and are not registered in the
        clock tree. Clock are managed within the PHY driver, therefore
        it is not described in this document
      - Add $ref: snps,dwc-ahci-common.yaml#.
    - Add eswin,eic7700-sata-phy.yaml
      - Add this file to include the description of the PHY on EIC7700 SoC
    - Add an eswin directory under the PHY driver path, and include the SATA
      PHY driver code for EIC7700 SoC
    - Link to v1: https://lore.kernel.org/all/20250515085114.1692-1-hehuan1@eswincomputing.com/

Yulin Lu (3):
  dt-bindings: ata: eswin: Document for EIC7700 SoC ahci
  dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHY
  phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver

 .../bindings/ata/eswin,eic7700-ahci.yaml      |  79 +++++++
 .../bindings/phy/eswin,eic7700-sata-phy.yaml  |  36 ++++
 drivers/phy/Kconfig                           |   1 +
 drivers/phy/Makefile                          |   1 +
 drivers/phy/eswin/Kconfig                     |  14 ++
 drivers/phy/eswin/Makefile                    |   2 +
 drivers/phy/eswin/phy-eic7700-sata.c          | 192 ++++++++++++++++++
 7 files changed, 325 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml
 create mode 100644 drivers/phy/eswin/Kconfig
 create mode 100644 drivers/phy/eswin/Makefile
 create mode 100644 drivers/phy/eswin/phy-eic7700-sata.c

-- 
2.25.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 2/3] dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHY

[Yulin Lu]

Document the SATA PHY on the EIC7700 SoC platform,
describing its usage.

Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/phy/eswin,eic7700-sata-phy.yaml  | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml b/Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml
new file mode 100644
index 000000000000..439633827153
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/eswin,eic7700-sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eswin EIC7700 SoC SATA PHY
+
+maintainers:
+  - Yulin Lu <luyulin@eswincomputing.com>
+  - Huan He <hehuan1@eswincomputing.com>
+
+properties:
+  compatible:
+    const: eswin,eic7700-sata-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    sata-phy@50440300 {
+        compatible = "eswin,eic7700-sata-phy";
+        reg = <0x50440300 0x40>;
+        #phy-cells = <0>;
+    };
-- 
2.25.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy