[PATCH v1 2/4] dt-bindings: usb: dwc3: Add Google SoC DWC3 USB

[Roy Luo <royluo@google.com>]

Document the DWC3 USB bindings for Google Tensor SoCs.

Signed-off-by: Roy Luo <royluo@google.com>
---
 .../bindings/usb/google,snps-dwc3.yaml        | 144 ++++++++++++++++++
 1 file changed, 144 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/google,snps-dwc3.yaml

diff --git a/Documentation/devicetree/bindings/usb/google,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/google,snps-dwc3.yaml
new file mode 100644
index 000000000000..3e8bcc0c2cef
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/google,snps-dwc3.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2025, Google LLC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/google,snps-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google DWC3 USB SoC Controller
+
+maintainers:
+  - Roy Luo <royluo@google.com>
+
+description:
+  Describes the Google DWC3 USB block, based on Synopsys DWC3 IP.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - google,lga-dwc3
+      - const: google,snps-dwc3
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    description: |
+      The following memory regions must present:
+        - dwc3_core: Core DWC3 IP registers.
+        - host_cfg_csr: Hibernation control registers.
+        - usbint_csr: Hibernation interrupt registers.
+    items:
+      - const: dwc3_core
+      - const: host_cfg_csr
+      - const: usbint_csr
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  interrupt-names:
+    description: |
+      The following interrupts must present:
+        - dwc_usb3: Core DWC3 interrupt.
+        - hs_pme_irq: High speed remote wakeup interrupt for hibernation.
+        - ss_pme_irq: Super speed remote wakeup interrupt for hibernation.
+    items:
+      - const: dwc_usb3
+      - const: hs_pme_irq
+      - const: ss_pme_irq
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    minItems: 3
+    maxItems: 3
+
+  resets:
+    minItems: 5
+    maxItems: 5
+
+  reset-names:
+    items:
+      - const: usbc_non_sticky
+      - const: usbc_sticky
+      - const: usb_drd_bus
+      - const: u2phy_apb
+      - const: usb_top_csr
+
+  power-domains:
+    minItems: 2
+    maxItems: 2
+
+  power-domain-names:
+    description: |
+      The following power domain must present:
+          - usb_psw_pd: The child power domain of usb_top_pd. Turning it on puts the controller
+                         into full power state, turning it off puts the controller into power
+                         gated state.
+          - usb_top_pd: The parent power domain of usb_psw_pd. Turning it on puts the controller
+                         into power gated state, turning it off completely shuts off the
+                         controller.
+    items:
+      - const: usb_psw_pd
+      - const: usb_top_pd
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - resets
+  - reset-names
+  - power-domains
+  - power-domain-names
+
+allOf:
+  - $ref: snps,dwc3-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@c400000 {
+            compatible = "google,lga-dwc3", "google,snps-dwc3";
+            reg = <0 0x0c400000  0 0xd060>, <0 0x0c450000 0 0x14>, <0 0x0c450020 0 0x8>;
+            reg-names = "dwc3_core", "host_cfg_csr", "usbint_csr";
+            interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH 0>,
+                         <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH 0>,
+                         <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH 0>;
+            interrupt-names = "dwc_usb3", "hs_pme_irq", "ss_pme_irq";
+            clocks = <&hsion_usbc_non_sticky_clk>,  <&hsion_usbc_sticky_clk>,
+                     <&hsion_u2phy_apb_clk>;
+            clock-names = "usbc_non_sticky", "usbc_sticky", "u2phy_apb";
+            resets = <&hsion_resets_usbc_non_sticky>, <&hsion_resets_usbc_sticky>,
+                     <&hsion_resets_usb_drd_bus>, <&hsion_resets_u2phy_apb>,
+                     <&hsion_resets_usb_top_csr>;
+            reset-names = "usbc_non_sticky", "usbc_sticky",
+                     "usb_drd_bus", "u2phy_apb",
+                     "usb_top_csr";
+            power-domains = <&hsio_n_usb_psw_pd>, <&hsio_n_usb_pd>;
+            power-domain-names = "usb_psw_pd", "usb_top_pd";
+            phys = <&usb_phy 0>;
+            phy-names = "usb2-phy";
+            snps,quirk-frame-length-adjustment = <0x20>;
+            snps,gfladj-refclk-lpm-sel-quirk;
+            snps,incr-burst-type-adjustment = <4>;
+        };
+    };
+...
-- 
2.51.0.618.g983fd99d29-goog


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy