From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id B9A9FCCD199 for ; Fri, 17 Oct 2025 14:50:36 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:Cc:To:In-Reply-To:References:Message-Id :MIME-Version:Subject:Date:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=p/zef9zJUZh9K0DWGEn42skWVl/l+TVsKaOxiEPlEc8=; b=B0q1cfl81FUp1J noqtYaDxZb/pgfbmQnVsbJleyvGjM7l0SN3fBHIMgC2Z2W3DBXlAY9ZCoAva99zWuPZ4o8oQ7HDbk i8rXemE2ridy1/5sPa4is9Y4N1Ua+Gilfclfgv9qjKKlKNsv6y3OBQU30+KLxoyPg9qpAqzJP+4Do vAiTlSllA3ZYwHAqm+t/fDHeDbIffGAcl2iATAODq/W4nwBuuIIiZhOVZFZOze6OupV2Yw4qy0zmv 40yG35X1s+Wr1oDqu+5F+CD8QuCBJC5MSj7T7wRw/luMLY97iexzTCHAn000B402FzvfNwIPYU6vh Q6q/AAxvvtNJuxn3typA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98.2 #2 (Red Hat Linux)) id 1v9lms-000000089CP-2fkS; Fri, 17 Oct 2025 14:50:36 +0000 Received: from out-185.mta0.migadu.com ([2001:41d0:1004:224b::b9]) by bombadil.infradead.org with esmtps (Exim 4.98.2 #2 (Red Hat Linux)) id 1v9lmq-000000089AB-0SQt for linux-phy@lists.infradead.org; Fri, 17 Oct 2025 14:50:33 +0000 X-Report-Abuse: Please report any abuse attempt to abuse@migadu.com and include these headers. DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linux.dev; s=key1; t=1760712629; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=SQOiwvJHAprcF3S2canSZCrDDGSsG+867bjti4GoEgo=; b=EcZGZZV7COeOQbf9sUcm29ijvjCdR4mYYMV4F02pHzqWPNRrKmbgdLkYdqKIQSUXgJE4vt YES/MPAVcrUDB/cw3T1vFmPTAI92YWcKKMzv397W7/59yoaUzX369quI6CRHZ6RHlUMbgo KqrKmBjhy3ff/kYI1KRHcq24cWX3zmQ= From: Ze Huang Date: Fri, 17 Oct 2025 22:49:53 +0800 Subject: [PATCH v6 2/2] phy: spacemit: support K1 USB2.0 PHY controller MIME-Version: 1.0 Message-Id: <20251017-k1-usb2phy-v6-2-7cf9ea2477a1@linux.dev> References: <20251017-k1-usb2phy-v6-0-7cf9ea2477a1@linux.dev> In-Reply-To: <20251017-k1-usb2phy-v6-0-7cf9ea2477a1@linux.dev> To: Vinod Koul , Kishon Vijay Abraham I , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Yixun Lan , Ze Huang Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-riscv@lists.infradead.org, spacemit@lists.linux.dev, linux-kernel@vger.kernel.org, Ze Huang X-Developer-Signature: v=1; a=ed25519-sha256; t=1760712608; l=9055; i=huang.ze@linux.dev; s=20250705; h=from:subject:message-id; bh=I41wqT+slyrOuL6RJOlJuJ956m3tqTCbWWeVtDQOgNg=; b=L3o5/NhCgqn8Eb9GSbI9hfoM27LN6qOtignRjoVwamsxw9OwPAeYqSggydMoqdlJUjl7flt+u PE+bOHlfMQIBm4LB6rr8WIYWNHUAXeLJFW0VmpXo7jhVF00D7LCVglu X-Developer-Key: i=huang.ze@linux.dev; a=ed25519; pk=Kzc4PMu5PTo8eZZQ5xmTNL9jeXcQ9Wml0cs+vlQpBkg= X-Migadu-Flow: FLOW_OUT X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20251017_075032_283686_2E34CE70 X-CRM114-Status: GOOD ( 22.97 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org The SpacemiT K1 SoC includes three USB ports: - One USB2.0 OTG port - One USB2.0 host-only port - One USB3.0 port with an integrated USB2.0 DRD interface Each of these ports is connected to a USB2.0 PHY responsible for USB2 transmission. This commit adds support for the SpacemiT K1 USB2.0 PHY, which is compliant with the USB 2.0 specification and supports both 8-bit 60MHz and 16-bit 30MHz parallel interfaces. Signed-off-by: Ze Huang --- drivers/phy/Kconfig | 1 + drivers/phy/Makefile | 1 + drivers/phy/spacemit/Kconfig | 13 +++ drivers/phy/spacemit/Makefile | 2 + drivers/phy/spacemit/phy-k1-usb2.c | 200 +++++++++++++++++++++++++++++++++++++ 5 files changed, 217 insertions(+) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 1984c2e56122..95ee47f0fbc7 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -134,6 +134,7 @@ source "drivers/phy/rockchip/Kconfig" source "drivers/phy/samsung/Kconfig" source "drivers/phy/socionext/Kconfig" source "drivers/phy/sophgo/Kconfig" +source "drivers/phy/spacemit/Kconfig" source "drivers/phy/st/Kconfig" source "drivers/phy/starfive/Kconfig" source "drivers/phy/sunplus/Kconfig" diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index a206133a3515..950dd4f14372 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -37,6 +37,7 @@ obj-y += allwinner/ \ samsung/ \ socionext/ \ sophgo/ \ + spacemit/ \ st/ \ starfive/ \ sunplus/ \ diff --git a/drivers/phy/spacemit/Kconfig b/drivers/phy/spacemit/Kconfig new file mode 100644 index 000000000000..0136aee2e8a2 --- /dev/null +++ b/drivers/phy/spacemit/Kconfig @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Phy drivers for SpacemiT platforms +# +config PHY_SPACEMIT_K1_USB2 + tristate "SpacemiT K1 USB 2.0 PHY support" + depends on (ARCH_SPACEMIT || COMPILE_TEST) && OF + depends on COMMON_CLK + depends on USB_COMMON + select GENERIC_PHY + help + Enable this to support K1 USB 2.0 PHY driver. This driver takes care of + enabling and clock setup and will be used by K1 udc/ehci/otg/xhci driver. diff --git a/drivers/phy/spacemit/Makefile b/drivers/phy/spacemit/Makefile new file mode 100644 index 000000000000..fec0b425a948 --- /dev/null +++ b/drivers/phy/spacemit/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_PHY_SPACEMIT_K1_USB2) += phy-k1-usb2.o diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c new file mode 100644 index 000000000000..342061380012 --- /dev/null +++ b/drivers/phy/spacemit/phy-k1-usb2.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * SpacemiT K1 USB 2.0 PHY driver + * + * Copyright (C) 2025 SpacemiT (Hangzhou) Technology Co. Ltd + * Copyright (C) 2025 Ze Huang + */ + +#include +#include +#include +#include +#include +#include + +#define PHY_RST_MODE_CTRL 0x04 +#define PHY_PLL_RDY BIT(0) +#define PHY_CLK_CDR_EN BIT(1) +#define PHY_CLK_PLL_EN BIT(2) +#define PHY_CLK_MAC_EN BIT(3) +#define PHY_MAC_RSTN BIT(5) +#define PHY_CDR_RSTN BIT(6) +#define PHY_PLL_RSTN BIT(7) +/* + * hs line state sel (Bit 13): + * - 1 (Default): Internal HS line state is set to 01 when usb_hs_tx_en is valid. + * - 0: Internal HS line state is always driven by usb_hs_lstate. + * + * fs line state sel (Bit 14): + * - 1 (Default): FS line state is determined by the output data + * (usb_fs_datain/b). + * - 0: FS line state is always determined by the input data (dmo/dpo). + */ +#define PHY_HS_LINE_TX_MODE BIT(13) +#define PHY_FS_LINE_TX_MODE BIT(14) + +#define PHY_INIT_MODE_BITS (PHY_FS_LINE_TX_MODE | PHY_HS_LINE_TX_MODE) +#define PHY_CLK_ENABLE_BITS (PHY_CLK_PLL_EN | PHY_CLK_CDR_EN | \ + PHY_CLK_MAC_EN) +#define PHY_DEASSERT_RST_BITS (PHY_PLL_RSTN | PHY_CDR_RSTN | \ + PHY_MAC_RSTN) + +#define PHY_TX_HOST_CTRL 0x10 +#define PHY_HST_DISC_AUTO_CLR BIT(2) /* autoclear hs host disc when re-connect */ + +#define PHY_HSTXP_HW_CTRL 0x34 +#define PHY_HSTXP_RSTN BIT(2) /* generate reset for clock hstxp */ +#define PHY_CLK_HSTXP_EN BIT(3) /* clock hstxp enable */ +#define PHY_HSTXP_MODE BIT(4) /* 0: force en_txp to be 1; 1: no force */ + +#define PHY_PLL_DIV_CFG 0x98 +#define PHY_FDIV_FRACT_8_15 GENMASK(7, 0) +#define PHY_FDIV_FRACT_16_19 GENMASK(11, 8) +#define PHY_FDIV_FRACT_20_21 BIT(12) /* fdiv_reg<21>, <20>, bit21 == bit20 */ +/* + * freq_sel<1:0> + * if ref clk freq=24.0MHz-->freq_sel<2:0> == 3b'001, then internal divider value == 80 + */ +#define PHY_FDIV_FRACT_0_1 GENMASK(14, 13) +/* + * pll divider value selection + * 1: divider value will choose internal default value ,dependent on freq_sel<1:0> + * 0: divider value will be over ride by fdiv_reg<21:0> + */ +#define PHY_DIV_LOCAL_EN BIT(15) + +#define PHY_SEL_FREQ_24MHZ 0x01 +#define FDIV_REG_MASK (PHY_FDIV_FRACT_20_21 | PHY_FDIV_FRACT_16_19 | \ + PHY_FDIV_FRACT_8_15) +#define FDIV_REG_VAL 0x1ec4 /* 0x100 selects 24MHz, rest are default */ + +#define K1_USB2PHY_RESET_TIME_MS 50 + +struct spacemit_usb2phy { + struct phy *phy; + struct clk *clk; + struct regmap *regmap_base; +}; + +static const struct regmap_config phy_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = 0x200, +}; + +static int spacemit_usb2phy_init(struct phy *phy) +{ + struct spacemit_usb2phy *sphy = phy_get_drvdata(phy); + struct regmap *map = sphy->regmap_base; + u32 val; + int ret; + + ret = clk_enable(sphy->clk); + if (ret) { + dev_err(&phy->dev, "failed to enable clock\n"); + clk_disable(sphy->clk); + return ret; + } + + /* + * make sure the usb controller is not under reset process before + * any configuration + */ + usleep_range(150, 200); + + /* 24M ref clk */ + val = FIELD_PREP(FDIV_REG_MASK, FDIV_REG_VAL) | + FIELD_PREP(PHY_FDIV_FRACT_0_1, PHY_SEL_FREQ_24MHZ) | + PHY_DIV_LOCAL_EN; + regmap_write(map, PHY_PLL_DIV_CFG, val); + + ret = regmap_read_poll_timeout(map, PHY_RST_MODE_CTRL, val, + (val & PHY_PLL_RDY), + 500, K1_USB2PHY_RESET_TIME_MS * 1000); + if (ret) { + dev_err(&phy->dev, "wait PLLREADY timeout\n"); + clk_disable(sphy->clk); + return ret; + } + + /* release usb2 phy internal reset and enable clock gating */ + val = (PHY_INIT_MODE_BITS | PHY_CLK_ENABLE_BITS | PHY_DEASSERT_RST_BITS); + regmap_write(map, PHY_RST_MODE_CTRL, val); + + val = (PHY_HSTXP_RSTN | PHY_CLK_HSTXP_EN | PHY_HSTXP_MODE); + regmap_write(map, PHY_HSTXP_HW_CTRL, val); + + /* auto clear host disc */ + regmap_update_bits(map, PHY_TX_HOST_CTRL, PHY_HST_DISC_AUTO_CLR, + PHY_HST_DISC_AUTO_CLR); + + return 0; +} + +static int spacemit_usb2phy_exit(struct phy *phy) +{ + struct spacemit_usb2phy *sphy = phy_get_drvdata(phy); + + clk_disable(sphy->clk); + + return 0; +} + +static const struct phy_ops spacemit_usb2phy_ops = { + .init = spacemit_usb2phy_init, + .exit = spacemit_usb2phy_exit, + .owner = THIS_MODULE, +}; + +static int spacemit_usb2phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct spacemit_usb2phy *sphy; + void __iomem *base; + + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); + if (!sphy) + return -ENOMEM; + + sphy->clk = devm_clk_get_prepared(&pdev->dev, NULL); + if (IS_ERR(sphy->clk)) + return dev_err_probe(dev, PTR_ERR(sphy->clk), "Failed to get clock\n"); + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + sphy->regmap_base = devm_regmap_init_mmio(dev, base, &phy_regmap_config); + if (IS_ERR(sphy->regmap_base)) + return dev_err_probe(dev, PTR_ERR(sphy->regmap_base), "Failed to init regmap\n"); + + sphy->phy = devm_phy_create(dev, NULL, &spacemit_usb2phy_ops); + if (IS_ERR(sphy->phy)) + return dev_err_probe(dev, PTR_ERR(sphy->phy), "Failed to create phy\n"); + + phy_set_drvdata(sphy->phy, sphy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id spacemit_usb2phy_dt_match[] = { + { .compatible = "spacemit,k1-usb2-phy", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, spacemit_usb2phy_dt_match); + +static struct platform_driver spacemit_usb2_phy_driver = { + .probe = spacemit_usb2phy_probe, + .driver = { + .name = "spacemit-usb2-phy", + .of_match_table = spacemit_usb2phy_dt_match, + }, +}; +module_platform_driver(spacemit_usb2_phy_driver); + +MODULE_DESCRIPTION("Spacemit USB 2.0 PHY driver"); +MODULE_LICENSE("GPL"); -- 2.51.1.dirty -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy