Re: [PATCH 6/8] mmc: host: axiado: add AX3000 eMMC PHY support to sdhci-of-arasan

[Krzysztof Kozlowski <krzk@kernel.org>]

On Mon, Dec 22, 2025 at 04:45:05PM +0800, Tzu-Hao Wei wrote:
> From: SriNavmani A <srinavmani@axiado.com>
> 
> Add support for the external eMMC PHY used on the AX3000 SoC in the
> sdhci-of-arasan driver. The default Arasan host driver operates at
> 25 MHz, but with the external PHY support, the controller can achieve
> HS200 mode operation at 200 MHz.
> 
> This change integrates the AX3000 eMMC PHY driver with the existing
> sdhci-of-arasan host controller driver to enable high-speed eMMC
> operations.
> 
> Signed-off-by: Tzu-Hao Wei <twei@axiado.com>
> ---
>  drivers/mmc/host/sdhci-of-arasan.c | 20 +++++++++++++-------

Why do you mix mmc, phy and soc into one patchset?

>  1 file changed, 13 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index ab7f0ffe7b4f007a58eb0a26868b08b0b02b40f3..2d4f64e9014ae168957113478edc11209cd76b64 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -1547,6 +1547,10 @@ static const struct of_device_id sdhci_arasan_of_match[] = {
>  		.compatible = "arasan,sdhci-5.1",
>  		.data = &sdhci_arasan_generic_data,
>  	},
> +	{
> +		.compatible = "axiado,ax3000-sdhci-5.1-emmc",
> +		.data = &sdhci_arasan_generic_data,
> +	},
>  	{
>  		.compatible = "arasan,sdhci-4.9a",
>  		.data = &sdhci_arasan_generic_data,
> @@ -2019,15 +2023,17 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
>  			goto unreg_clk;
>  		}
>  
> -		host->mmc_host_ops.hs400_enhanced_strobe =
> +		if (!of_device_is_compatible(np, "axiado,ax3000-sdhci-5.1-emmc")) {

No, don't sprinkle compatibles all around. You should use driver match
data for this.

Best regards,
Krzysztof


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy