[PATCH v6 2/8] phy: sort Kconfig and Makefile

["Théo Lebrun" <theo.lebrun@bootlin.com>]

Neither Kconfig nor Makefile are sorted; reorder them.

$ diff -U100 <(grep ^config drivers/phy/Kconfig) \
             <(grep ^config drivers/phy/Kconfig | sort)

$ diff -U100 <(grep ^obj-\\$ drivers/phy/Makefile) \
             <(grep ^obj-\\$ drivers/phy/Makefile | sort)

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/phy/Kconfig  | 62 ++++++++++++++++++++++++++--------------------------
 drivers/phy/Makefile |  6 ++---
 2 files changed, 34 insertions(+), 34 deletions(-)

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 678dd0452f0a..4f1b1d7f5d20 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -25,6 +25,26 @@ config GENERIC_PHY_MIPI_DPHY
 	  Provides a number of helpers a core functions for MIPI D-PHY
 	  drivers to us.
 
+config PHY_AIROHA_PCIE
+	tristate "Airoha PCIe-PHY Driver"
+	depends on ARCH_AIROHA || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Say Y here to add support for Airoha PCIe PHY driver.
+	  This driver create the basic PHY instance and provides initialize
+	  callback for PCIe GEN3 port.
+
+config PHY_CAN_TRANSCEIVER
+	tristate "CAN transceiver PHY"
+	select GENERIC_PHY
+	select MULTIPLEXER
+	help
+	  This option enables support for CAN transceivers as a PHY. This
+	  driver provides function for putting the transceivers in various
+	  functional modes using gpios and sets the attribute max link
+	  rate, for CAN drivers.
+
 config PHY_LPC18XX_USB_OTG
 	tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
 	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
@@ -36,6 +56,17 @@ config PHY_LPC18XX_USB_OTG
 	  This driver is need for USB0 support on LPC18xx/43xx and takes
 	  care of enabling and clock setup.
 
+config PHY_NXP_PTN3222
+	tristate "NXP PTN3222 1-port eUSB2 to USB2 redriver"
+	depends on I2C
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Enable this to support NXP PTN3222 1-port eUSB2 to USB2 Redriver.
+	  This redriver performs translation between eUSB2 and USB2 signalling
+	  schemes. It supports all three USB 2.0 data rates: Low Speed, Full
+	  Speed and High Speed.
+
 config PHY_PISTACHIO_USB
 	tristate "IMG Pistachio USB2.0 PHY driver"
 	depends on MIPS || COMPILE_TEST
@@ -70,37 +101,6 @@ config USB_LGM_PHY
 	  interface to interact with USB GEN-II and USB 3.x PHY that is part
 	  of the Intel network SOC.
 
-config PHY_CAN_TRANSCEIVER
-	tristate "CAN transceiver PHY"
-	select GENERIC_PHY
-	select MULTIPLEXER
-	help
-	  This option enables support for CAN transceivers as a PHY. This
-	  driver provides function for putting the transceivers in various
-	  functional modes using gpios and sets the attribute max link
-	  rate, for CAN drivers.
-
-config PHY_AIROHA_PCIE
-	tristate "Airoha PCIe-PHY Driver"
-	depends on ARCH_AIROHA || COMPILE_TEST
-	depends on OF
-	select GENERIC_PHY
-	help
-	  Say Y here to add support for Airoha PCIe PHY driver.
-	  This driver create the basic PHY instance and provides initialize
-	  callback for PCIe GEN3 port.
-
-config PHY_NXP_PTN3222
-	tristate "NXP PTN3222 1-port eUSB2 to USB2 redriver"
-	depends on I2C
-	depends on OF
-	select GENERIC_PHY
-	help
-	  Enable this to support NXP PTN3222 1-port eUSB2 to USB2 Redriver.
-	  This redriver performs translation between eUSB2 and USB2 signalling
-	  schemes. It supports all three USB 2.0 data rates: Low Speed, Full
-	  Speed and High Speed.
-
 source "drivers/phy/allwinner/Kconfig"
 source "drivers/phy/amlogic/Kconfig"
 source "drivers/phy/broadcom/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index bfb27fb5a494..9943d742571d 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -5,14 +5,14 @@
 
 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
 obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY)	+= phy-core-mipi-dphy.o
+obj-$(CONFIG_PHY_AIROHA_PCIE)		+= phy-airoha-pcie.o
 obj-$(CONFIG_PHY_CAN_TRANSCEIVER)	+= phy-can-transceiver.o
 obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
-obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
+obj-$(CONFIG_PHY_NXP_PTN3222)		+= phy-nxp-ptn3222.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
 obj-$(CONFIG_PHY_SNPS_EUSB2)		+= phy-snps-eusb2.o
+obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
 obj-$(CONFIG_USB_LGM_PHY)		+= phy-lgm-usb.o
-obj-$(CONFIG_PHY_AIROHA_PCIE)		+= phy-airoha-pcie.o
-obj-$(CONFIG_PHY_NXP_PTN3222)		+= phy-nxp-ptn3222.o
 obj-y					+= allwinner/	\
 					   amlogic/	\
 					   broadcom/	\

-- 
2.52.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy