[PATCH 3/3] phy: qcom: edp: Add eDP phy mode switch support

[Yongxing Mou <yongxing.mou@oss.qualcomm.com>]

Add DP/eDP switch support by splitting the PHY swing/pre-emphasis tables
into separate DP and eDP configurations. This allows the driver to select
the correct table based on the is_edp flag.

Add a dedicated table for the SC7280/glymur platforms, as they are not
compatible with the others.

Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 72 ++++++++++++++++++++++++++++---------
 1 file changed, 56 insertions(+), 16 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 388226dbad7f..85caa869a8c0 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -88,7 +88,8 @@ struct qcom_edp_phy_cfg {
 	bool is_edp;
 	const u8 *aux_cfg;
 	const u8 *vco_div_cfg;
-	const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
+	const struct qcom_edp_swing_pre_emph_cfg *dp_swing_pre_emph_cfg;
+	const struct qcom_edp_swing_pre_emph_cfg *edp_swing_pre_emph_cfg;
 	const struct phy_ver_ops *ver_ops;
 };
 
@@ -151,6 +152,20 @@ static const struct qcom_edp_swing_pre_emph_cfg dp_phy_swing_pre_emph_cfg = {
 	.pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3,
 };
 
+static const u8 dp_pre_emp_hbr_rbr_v8[4][4] = {
+	{ 0x00, 0x0e, 0x15, 0x1a },
+	{ 0x00, 0x0e, 0x15, 0xff },
+	{ 0x00, 0x0e, 0xff, 0xff },
+	{ 0x00, 0xff, 0xff, 0xff }
+};
+
+static const struct qcom_edp_swing_pre_emph_cfg dp_phy_swing_pre_emph_cfg_v8 = {
+	.swing_hbr_rbr = &dp_swing_hbr_rbr,
+	.swing_hbr3_hbr2 = &dp_swing_hbr2_hbr3,
+	.pre_emphasis_hbr_rbr = &dp_pre_emp_hbr_rbr_v8,
+	.pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3,
+};
+
 static const u8 edp_swing_hbr_rbr[4][4] = {
 	{ 0x07, 0x0f, 0x16, 0x1f },
 	{ 0x0d, 0x16, 0x1e, 0xff },
@@ -186,6 +201,27 @@ static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = {
 	.pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
 };
 
+static const u8 edp_swing_hbr2_hbr3_v3[4][4] = {
+	{ 0x0b, 0x11, 0x16, 0x1b },
+	{ 0x0b, 0x19, 0x1f, 0xff },
+	{ 0x18, 0x1f, 0xff, 0xff },
+	{ 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 edp_pre_emp_hbr2_hbr3_v3[4][4] = {
+	{ 0x0c, 0x15, 0x19, 0x1e },
+	{ 0x09, 0x14, 0x19, 0xff },
+	{ 0x0f, 0x14, 0xff, 0xff },
+	{ 0x0d, 0xff, 0xff, 0xff }
+};
+
+static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg_v3 = {
+	.swing_hbr_rbr = &edp_swing_hbr_rbr,
+	.swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3_v3,
+	.pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr,
+	.pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3_v3,
+};
+
 static const u8 edp_phy_aux_cfg_v4[DP_AUX_CFG_SIZE] = {
 	0x00, 0x13, 0x24, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03, 0x02, 0x02, 0x00,
 };
@@ -242,12 +278,7 @@ static int qcom_edp_phy_init(struct phy *phy)
 	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
 	       edp->edp + DP_PHY_PD_CTL);
 
-	/*
-	 * TODO: Re-work the conditions around setting the cfg8 value
-	 * when more information becomes available about why this is
-	 * even needed.
-	 */
-	if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
+	if (!edp->is_edp)
 		aux_cfg[8] = 0xb7;
 
 	writel(0xfc, edp->edp + DP_PHY_MODE);
@@ -271,7 +302,7 @@ static int qcom_edp_phy_init(struct phy *phy)
 
 static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configure_opts_dp *dp_opts)
 {
-	const struct qcom_edp_swing_pre_emph_cfg *cfg = edp->cfg->swing_pre_emph_cfg;
+	const struct qcom_edp_swing_pre_emph_cfg *cfg;
 	unsigned int v_level = 0;
 	unsigned int p_level = 0;
 	int ret;
@@ -279,12 +310,14 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur
 	u8 emph;
 	int i;
 
+	if (edp->is_edp)
+		cfg = edp->cfg->edp_swing_pre_emph_cfg;
+	else
+		cfg = edp->cfg->dp_swing_pre_emph_cfg;
+
 	if (!cfg)
 		return 0;
 
-	if (edp->is_edp)
-		cfg = &edp_phy_swing_pre_emph_cfg;
-
 	for (i = 0; i < dp_opts->lanes; i++) {
 		v_level = max(v_level, dp_opts->voltage[i]);
 		p_level = max(p_level, dp_opts->pre[i]);
@@ -591,20 +624,24 @@ static const struct qcom_edp_phy_cfg sa8775p_dp_phy_cfg = {
 	.is_edp = false,
 	.aux_cfg = edp_phy_aux_cfg_v5,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v4,
-	.swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
+	.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v4,
 };
 
 static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
 	.aux_cfg = edp_phy_aux_cfg_v4,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v4,
+	.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v3,
 	.ver_ops = &qcom_edp_phy_ops_v3,
 };
 
 static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
 	.aux_cfg = edp_phy_aux_cfg_v4,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v4,
-	.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v4,
 };
 
@@ -612,7 +649,8 @@ static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
 	.is_edp = true,
 	.aux_cfg = edp_phy_aux_cfg_v4,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v4,
-	.swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
+	.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v4,
 };
 
@@ -811,7 +849,8 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v6 = {
 static struct qcom_edp_phy_cfg x1e80100_phy_cfg = {
 	.aux_cfg = edp_phy_aux_cfg_v4,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v4,
-	.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v6,
 };
 
@@ -991,7 +1030,8 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v8 = {
 static struct qcom_edp_phy_cfg glymur_phy_cfg = {
 	.aux_cfg = edp_phy_aux_cfg_v8,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v8,
-	.swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
+	.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg_v8,
+	.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v8,
 };
 

-- 
2.43.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy