* [PATCH] phy: move spacemit pcie driver to its subfolder
@ 2026-02-23 6:42 Vinod Koul
2026-02-23 13:00 ` Alex Elder
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Vinod Koul @ 2026-02-23 6:42 UTC (permalink / raw)
To: linux-phy
Cc: Neil Armstrong, Vladimir Oltean, Vinod Koul, Alex Elder, Ze Huang,
spacemit
Commit fe4bc1a08638 ("phy: spacemit: support K1 USB2.0 PHY controller")
created spacemit subfolder with usb driver while commit 57e920b92724
("phy: spacemit: Introduce PCIe/combo PHY") added pcie driver in phy
folder. Move latter into spacemit subfolder and rename file to
phy-k1-pcie.c
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/phy/Kconfig | 12 ------------
drivers/phy/Makefile | 1 -
drivers/phy/spacemit/Kconfig | 12 ++++++++++++
drivers/phy/spacemit/Makefile | 1 +
.../phy-k1-pcie.c} | 0
5 files changed, 13 insertions(+), 13 deletions(-)
rename drivers/phy/{phy-spacemit-k1-pcie.c => spacemit/phy-k1-pcie.c} (100%)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 02467dfd4fb0..c0574e44f0a3 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -134,18 +134,6 @@ config PHY_NXP_PTN3222
schemes. It supports all three USB 2.0 data rates: Low Speed, Full
Speed and High Speed.
-config PHY_SPACEMIT_K1_PCIE
- tristate "PCIe and combo PHY driver for the SpacemiT K1 SoC"
- depends on ARCH_SPACEMIT || COMPILE_TEST
- depends on COMMON_CLK
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
- default ARCH_SPACEMIT
- help
- Enable support for the PCIe and USB 3 combo PHY and two
- PCIe-only PHYs used in the SpacemiT K1 SoC.
-
source "drivers/phy/allwinner/Kconfig"
source "drivers/phy/amlogic/Kconfig"
source "drivers/phy/apple/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index a648c2e02a83..2773d596e543 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_PHY_SNPS_EUSB2) += phy-snps-eusb2.o
obj-$(CONFIG_USB_LGM_PHY) += phy-lgm-usb.o
obj-$(CONFIG_PHY_AIROHA_PCIE) += phy-airoha-pcie.o
obj-$(CONFIG_PHY_NXP_PTN3222) += phy-nxp-ptn3222.o
-obj-$(CONFIG_PHY_SPACEMIT_K1_PCIE) += phy-spacemit-k1-pcie.o
obj-$(CONFIG_GENERIC_PHY) += allwinner/ \
amlogic/ \
apple/ \
diff --git a/drivers/phy/spacemit/Kconfig b/drivers/phy/spacemit/Kconfig
index 0136aee2e8a2..50b0005acf66 100644
--- a/drivers/phy/spacemit/Kconfig
+++ b/drivers/phy/spacemit/Kconfig
@@ -2,6 +2,18 @@
#
# Phy drivers for SpacemiT platforms
#
+config PHY_SPACEMIT_K1_PCIE
+ tristate "PCIe and combo PHY driver for the SpacemiT K1 SoC"
+ depends on ARCH_SPACEMIT || COMPILE_TEST
+ depends on COMMON_CLK
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+ default ARCH_SPACEMIT
+ help
+ Enable support for the PCIe and USB 3 combo PHY and two
+ PCIe-only PHYs used in the SpacemiT K1 SoC.
+
config PHY_SPACEMIT_K1_USB2
tristate "SpacemiT K1 USB 2.0 PHY support"
depends on (ARCH_SPACEMIT || COMPILE_TEST) && OF
diff --git a/drivers/phy/spacemit/Makefile b/drivers/phy/spacemit/Makefile
index fec0b425a948..a821a21d6142 100644
--- a/drivers/phy/spacemit/Makefile
+++ b/drivers/phy/spacemit/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_PHY_SPACEMIT_K1_PCIE) += phy-k1-pcie.o
obj-$(CONFIG_PHY_SPACEMIT_K1_USB2) += phy-k1-usb2.o
diff --git a/drivers/phy/phy-spacemit-k1-pcie.c b/drivers/phy/spacemit/phy-k1-pcie.c
similarity index 100%
rename from drivers/phy/phy-spacemit-k1-pcie.c
rename to drivers/phy/spacemit/phy-k1-pcie.c
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] phy: move spacemit pcie driver to its subfolder
2026-02-23 6:42 [PATCH] phy: move spacemit pcie driver to its subfolder Vinod Koul
@ 2026-02-23 13:00 ` Alex Elder
2026-02-23 14:38 ` Yixun Lan
2026-02-27 15:29 ` Vinod Koul
2 siblings, 0 replies; 4+ messages in thread
From: Alex Elder @ 2026-02-23 13:00 UTC (permalink / raw)
To: Vinod Koul, linux-phy; +Cc: Neil Armstrong, Vladimir Oltean, Ze Huang, spacemit
On 2/23/26 12:42 AM, Vinod Koul wrote:
> Commit fe4bc1a08638 ("phy: spacemit: support K1 USB2.0 PHY controller")
> created spacemit subfolder with usb driver while commit 57e920b92724
> ("phy: spacemit: Introduce PCIe/combo PHY") added pcie driver in phy
> folder. Move latter into spacemit subfolder and rename file to
> phy-k1-pcie.c
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
Looks good. Thanks!
Reviewed-by: Alex Elder <elder@riscstar.com>
> ---
> drivers/phy/Kconfig | 12 ------------
> drivers/phy/Makefile | 1 -
> drivers/phy/spacemit/Kconfig | 12 ++++++++++++
> drivers/phy/spacemit/Makefile | 1 +
> .../phy-k1-pcie.c} | 0
> 5 files changed, 13 insertions(+), 13 deletions(-)
> rename drivers/phy/{phy-spacemit-k1-pcie.c => spacemit/phy-k1-pcie.c} (100%)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 02467dfd4fb0..c0574e44f0a3 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -134,18 +134,6 @@ config PHY_NXP_PTN3222
> schemes. It supports all three USB 2.0 data rates: Low Speed, Full
> Speed and High Speed.
>
> -config PHY_SPACEMIT_K1_PCIE
> - tristate "PCIe and combo PHY driver for the SpacemiT K1 SoC"
> - depends on ARCH_SPACEMIT || COMPILE_TEST
> - depends on COMMON_CLK
> - depends on HAS_IOMEM
> - depends on OF
> - select GENERIC_PHY
> - default ARCH_SPACEMIT
> - help
> - Enable support for the PCIe and USB 3 combo PHY and two
> - PCIe-only PHYs used in the SpacemiT K1 SoC.
> -
> source "drivers/phy/allwinner/Kconfig"
> source "drivers/phy/amlogic/Kconfig"
> source "drivers/phy/apple/Kconfig"
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index a648c2e02a83..2773d596e543 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -16,7 +16,6 @@ obj-$(CONFIG_PHY_SNPS_EUSB2) += phy-snps-eusb2.o
> obj-$(CONFIG_USB_LGM_PHY) += phy-lgm-usb.o
> obj-$(CONFIG_PHY_AIROHA_PCIE) += phy-airoha-pcie.o
> obj-$(CONFIG_PHY_NXP_PTN3222) += phy-nxp-ptn3222.o
> -obj-$(CONFIG_PHY_SPACEMIT_K1_PCIE) += phy-spacemit-k1-pcie.o
> obj-$(CONFIG_GENERIC_PHY) += allwinner/ \
> amlogic/ \
> apple/ \
> diff --git a/drivers/phy/spacemit/Kconfig b/drivers/phy/spacemit/Kconfig
> index 0136aee2e8a2..50b0005acf66 100644
> --- a/drivers/phy/spacemit/Kconfig
> +++ b/drivers/phy/spacemit/Kconfig
> @@ -2,6 +2,18 @@
> #
> # Phy drivers for SpacemiT platforms
> #
> +config PHY_SPACEMIT_K1_PCIE
> + tristate "PCIe and combo PHY driver for the SpacemiT K1 SoC"
> + depends on ARCH_SPACEMIT || COMPILE_TEST
> + depends on COMMON_CLK
> + depends on HAS_IOMEM
> + depends on OF
> + select GENERIC_PHY
> + default ARCH_SPACEMIT
> + help
> + Enable support for the PCIe and USB 3 combo PHY and two
> + PCIe-only PHYs used in the SpacemiT K1 SoC.
> +
> config PHY_SPACEMIT_K1_USB2
> tristate "SpacemiT K1 USB 2.0 PHY support"
> depends on (ARCH_SPACEMIT || COMPILE_TEST) && OF
> diff --git a/drivers/phy/spacemit/Makefile b/drivers/phy/spacemit/Makefile
> index fec0b425a948..a821a21d6142 100644
> --- a/drivers/phy/spacemit/Makefile
> +++ b/drivers/phy/spacemit/Makefile
> @@ -1,2 +1,3 @@
> # SPDX-License-Identifier: GPL-2.0-only
> +obj-$(CONFIG_PHY_SPACEMIT_K1_PCIE) += phy-k1-pcie.o
> obj-$(CONFIG_PHY_SPACEMIT_K1_USB2) += phy-k1-usb2.o
> diff --git a/drivers/phy/phy-spacemit-k1-pcie.c b/drivers/phy/spacemit/phy-k1-pcie.c
> similarity index 100%
> rename from drivers/phy/phy-spacemit-k1-pcie.c
> rename to drivers/phy/spacemit/phy-k1-pcie.c
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] phy: move spacemit pcie driver to its subfolder
2026-02-23 6:42 [PATCH] phy: move spacemit pcie driver to its subfolder Vinod Koul
2026-02-23 13:00 ` Alex Elder
@ 2026-02-23 14:38 ` Yixun Lan
2026-02-27 15:29 ` Vinod Koul
2 siblings, 0 replies; 4+ messages in thread
From: Yixun Lan @ 2026-02-23 14:38 UTC (permalink / raw)
To: Vinod Koul
Cc: linux-phy, Neil Armstrong, Vladimir Oltean, Alex Elder, Ze Huang,
spacemit
Hi Vinod,
On 12:12 Mon 23 Feb , Vinod Koul wrote:
> Commit fe4bc1a08638 ("phy: spacemit: support K1 USB2.0 PHY controller")
> created spacemit subfolder with usb driver while commit 57e920b92724
> ("phy: spacemit: Introduce PCIe/combo PHY") added pcie driver in phy
> folder. Move latter into spacemit subfolder and rename file to
> phy-k1-pcie.c
>
Make sense, this looks better, thanks
Reviewed-by: Yixun Lan <dlan@kernel.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> drivers/phy/Kconfig | 12 ------------
> drivers/phy/Makefile | 1 -
> drivers/phy/spacemit/Kconfig | 12 ++++++++++++
> drivers/phy/spacemit/Makefile | 1 +
> .../phy-k1-pcie.c} | 0
> 5 files changed, 13 insertions(+), 13 deletions(-)
> rename drivers/phy/{phy-spacemit-k1-pcie.c => spacemit/phy-k1-pcie.c} (100%)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 02467dfd4fb0..c0574e44f0a3 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -134,18 +134,6 @@ config PHY_NXP_PTN3222
> schemes. It supports all three USB 2.0 data rates: Low Speed, Full
> Speed and High Speed.
>
> -config PHY_SPACEMIT_K1_PCIE
> - tristate "PCIe and combo PHY driver for the SpacemiT K1 SoC"
> - depends on ARCH_SPACEMIT || COMPILE_TEST
> - depends on COMMON_CLK
> - depends on HAS_IOMEM
> - depends on OF
> - select GENERIC_PHY
> - default ARCH_SPACEMIT
> - help
> - Enable support for the PCIe and USB 3 combo PHY and two
> - PCIe-only PHYs used in the SpacemiT K1 SoC.
> -
> source "drivers/phy/allwinner/Kconfig"
> source "drivers/phy/amlogic/Kconfig"
> source "drivers/phy/apple/Kconfig"
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index a648c2e02a83..2773d596e543 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -16,7 +16,6 @@ obj-$(CONFIG_PHY_SNPS_EUSB2) += phy-snps-eusb2.o
> obj-$(CONFIG_USB_LGM_PHY) += phy-lgm-usb.o
> obj-$(CONFIG_PHY_AIROHA_PCIE) += phy-airoha-pcie.o
> obj-$(CONFIG_PHY_NXP_PTN3222) += phy-nxp-ptn3222.o
> -obj-$(CONFIG_PHY_SPACEMIT_K1_PCIE) += phy-spacemit-k1-pcie.o
> obj-$(CONFIG_GENERIC_PHY) += allwinner/ \
> amlogic/ \
> apple/ \
> diff --git a/drivers/phy/spacemit/Kconfig b/drivers/phy/spacemit/Kconfig
> index 0136aee2e8a2..50b0005acf66 100644
> --- a/drivers/phy/spacemit/Kconfig
> +++ b/drivers/phy/spacemit/Kconfig
> @@ -2,6 +2,18 @@
> #
> # Phy drivers for SpacemiT platforms
> #
> +config PHY_SPACEMIT_K1_PCIE
> + tristate "PCIe and combo PHY driver for the SpacemiT K1 SoC"
> + depends on ARCH_SPACEMIT || COMPILE_TEST
> + depends on COMMON_CLK
> + depends on HAS_IOMEM
> + depends on OF
> + select GENERIC_PHY
> + default ARCH_SPACEMIT
> + help
> + Enable support for the PCIe and USB 3 combo PHY and two
> + PCIe-only PHYs used in the SpacemiT K1 SoC.
> +
> config PHY_SPACEMIT_K1_USB2
> tristate "SpacemiT K1 USB 2.0 PHY support"
> depends on (ARCH_SPACEMIT || COMPILE_TEST) && OF
> diff --git a/drivers/phy/spacemit/Makefile b/drivers/phy/spacemit/Makefile
> index fec0b425a948..a821a21d6142 100644
> --- a/drivers/phy/spacemit/Makefile
> +++ b/drivers/phy/spacemit/Makefile
> @@ -1,2 +1,3 @@
> # SPDX-License-Identifier: GPL-2.0-only
> +obj-$(CONFIG_PHY_SPACEMIT_K1_PCIE) += phy-k1-pcie.o
> obj-$(CONFIG_PHY_SPACEMIT_K1_USB2) += phy-k1-usb2.o
> diff --git a/drivers/phy/phy-spacemit-k1-pcie.c b/drivers/phy/spacemit/phy-k1-pcie.c
> similarity index 100%
> rename from drivers/phy/phy-spacemit-k1-pcie.c
> rename to drivers/phy/spacemit/phy-k1-pcie.c
> --
> 2.43.0
>
>
--
Yixun Lan (dlan)
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] phy: move spacemit pcie driver to its subfolder
2026-02-23 6:42 [PATCH] phy: move spacemit pcie driver to its subfolder Vinod Koul
2026-02-23 13:00 ` Alex Elder
2026-02-23 14:38 ` Yixun Lan
@ 2026-02-27 15:29 ` Vinod Koul
2 siblings, 0 replies; 4+ messages in thread
From: Vinod Koul @ 2026-02-27 15:29 UTC (permalink / raw)
To: linux-phy, Vinod Koul
Cc: Neil Armstrong, Vladimir Oltean, Alex Elder, Ze Huang, spacemit
On Mon, 23 Feb 2026 12:12:39 +0530, Vinod Koul wrote:
> Commit fe4bc1a08638 ("phy: spacemit: support K1 USB2.0 PHY controller")
> created spacemit subfolder with usb driver while commit 57e920b92724
> ("phy: spacemit: Introduce PCIe/combo PHY") added pcie driver in phy
> folder. Move latter into spacemit subfolder and rename file to
> phy-k1-pcie.c
>
>
> [...]
Applied, thanks!
[1/1] phy: move spacemit pcie driver to its subfolder
commit: 75fb1a33f9ac4c9730e61bb19aaaab02023a99b2
Best regards,
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-02-27 15:29 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-02-23 6:42 [PATCH] phy: move spacemit pcie driver to its subfolder Vinod Koul
2026-02-23 13:00 ` Alex Elder
2026-02-23 14:38 ` Yixun Lan
2026-02-27 15:29 ` Vinod Koul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox