[PATCH v7 0/2] phy: Add generic PHY driver used by MACB/GEM on EyeQ5

["Théo Lebrun" <theo.lebrun@bootlin.com>]

EyeQ5 SoCs integrate two GEM instances. A system-controller register
region named "OLB" has some control over the Ethernet PHY integration.

Extend the current OLB ecosystem with a new generic PHY driver.
 - OLB is carried by one main platform driver: clk-eyeq.
 - It instantiates auxiliary devices: reset-eyeq & pinctrl-eyeq5.
 - We add a new one: phy-eyeq5-eth.

About related patches:

 - The MACB series [1] has been merged in v6.19-rc1. It makes MACB
   consume a generic PHY from devicetree with the EyeQ5 compatible.

 - clk patches are incoming to make clk-eyeq instantiate this new
   auxiliary device. They also ensure we get a dev->of_node assigned.
   Patches used to be [2] in the same series.

 - MIPS patches are incoming to add MACB/GEM instances in devicetree and
   their associated PHYs. They also update dt-bindings to reflect this
   new feature OLB provides. Patches used to be [2] in the same series.

Have a nice day,
Thanks!
Théo

[0]: https://lore.kernel.org/lkml/20250627-macb-v2-15-ff8207d0bb77@bootlin.com/
[1]: https://lore.kernel.org/lkml/20251022-macb-eyeq5-v2-0-7c140abb0581@bootlin.com/
[2]: https://lore.kernel.org/all/20260127-macb-phy-v6-0-cdd840588188@bootlin.com/

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
Changes in v7:
- Separate PHY / clk / MIPS patches into three series.
- Implement phy_validate().
- phy_power_on() now supports being called without a prior
  phy_set_mode() because at probe we read the hardware state to
  initialise inst->phy_instance.
- phy_set_mode() now support being called while the PHY is powered on.
- Add sgmii_support bool for each PHY instance to reject SGMII
  configuration on PHY 1 which only supports RGMII.
- Drop dev_dbg() calls.
- Drop readl(gp) in phy_init().
- Replace inst->priv field by inst->dev; that is the only value we need
  from the driver private data. Drop priv->dev field that is unused.
- Call into phy_exit() from phy_init() as the sequence is the same.
  Add comment to explain the reasoning.
- Take Reviewed-by: Luca on "phy: sort Kconfig and Makefile".
- Rebase onto v7.0-rc1 and test on EyeQ5. Only diff to report:
  PHY_COMMON_PROPS and PHY_COMMON_PROPS_TEST are kept at the top in the
  sorting patch; we do not strictly respect an alphabetical ordering.
- Link to v6: https://lore.kernel.org/r/20260127-macb-phy-v6-0-cdd840588188@bootlin.com

Changes in v6:
- Rebase upon v6.19-rc7; nothing to report.
- Add new patch "phy: sort Kconfig and Makefile".
- phy-eyeq5-eth: drop useless explicit __iomem cast to
  dev_get_platdata() return value.
- I did *not* drop the Kconfig `default MACH_EYEQ5` nor driver
  `dev_dbg()`. I think both are useful and should be kept. See
  last revision discussion here:
  https://lore.kernel.org/lkml/DFGSMN8268O0.33TYCQDBVHUHZ@bootlin.com/
- Link to v5: https://lore.kernel.org/r/20251215-macb-phy-v5-0-a9dfea39da34@bootlin.com

Changes in v5:
- phy-eyeq5-eth:
  - fix #includes: add delay, gfp_types, module and drop array_size,
    bug, cleanup, container_of, lockdep, mutex.
  - eq5_phy_xlate(): avoid magic value, use EQ5_PHY_COUNT.
  - use dev_err_probe() in error cases of devm_phy_create() and
    devm_of_phy_provider_register().
- 3x Reviewed-by: Luca Ceresoli.
- Add Neil Armstrong to Cc as new PHY subsystem reviewer.
- Rebase on v6.19-rc1, tested on hardware, no changes.
- Link to v4: https://lore.kernel.org/r/20251124-macb-phy-v4-0-955c625a81a7@bootlin.com

Changes in v4:
- Append my SoB to Jerome's patch:
  [PATCH v4 3/7] clk: eyeq: use the auxiliary device creation helper
- Rebase on net-next & linux-{clk,mips,phy}. Nothing to report.
- Link to v3: https://lore.kernel.org/r/20251119-macb-phy-v3-0-e9a7be186a33@bootlin.com

Changes in v3:
- Take Philipp Zabel's Reviewed-by & Acked-by trailers on reset patch.
- Take Thomas Bogendoerfer's two Acked-by trailers on DT patches.
- Rebase on net-next & test on target. Nothing to report.
- Link to v2: https://lore.kernel.org/r/20251101-macb-phy-v2-0-c1519eef16d3@bootlin.com

Changes in v2:
- Take Acked-by: Conor Dooley on dt-bindings-patch.
- s/%ld/%tu/ for printing ptrdiff_t; warnings on 32-bit archs.
  Reported by NIPA's netdev/build_32bit test.
  https://patchwork.kernel.org/project/netdevbpf/patch/20251021-macb-eyeq5-v1-7-3b0b5a9d2f85@bootlin.com/
  https://netdev.bots.linux.dev/static/nipa/1014126/14277857/build_32bit/stderr
- Link to v1: https://lore.kernel.org/r/20251022-macb-phy-v1-0-f29f28fae721@bootlin.com

Changes since MACB V1:
- Drop the old "mobileye,olb" properties from DT patches; found while
  running dtbs_check and dt_binding_check.
- Drop all patches targeting net-next. That is MACB dt-bindings patch
  and MACB driver code. See there here [1].
- Link to v1: https://lore.kernel.org/lkml/20251021-macb-eyeq5-v1-0-3b0b5a9d2f85@bootlin.com/

Past versions of MACB patches:
 - March 2025: [PATCH net-next 00/13] Support the Cadence MACB/GEM
   instances on Mobileye EyeQ5 SoCs
   https://lore.kernel.org/lkml/20250321-macb-v1-0-537b7e37971d@bootlin.com/
 - June 2025: [PATCH net-next v2 00/18] Support the Cadence MACB/GEM
   instances on Mobileye EyeQ5 SoCs
   https://lore.kernel.org/lkml/20250627-macb-v2-0-ff8207d0bb77@bootlin.com/
 - August 2025: [PATCH net v3 00/16] net: macb: various fixes & cleanup
   https://lore.kernel.org/lkml/20250808-macb-fixes-v3-0-08f1fcb5179f@bootlin.com/

---
Théo Lebrun (2):
      phy: sort Kconfig and Makefile
      phy: Add driver for EyeQ5 Ethernet PHY wrapper

 MAINTAINERS                 |   1 +
 drivers/phy/Kconfig         |  99 +++++++++--------
 drivers/phy/Makefile        |   9 +-
 drivers/phy/phy-eyeq5-eth.c | 261 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 323 insertions(+), 47 deletions(-)
---
base-commit: 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f
change-id: 20251022-macb-phy-21bc4e1dfbb7

Best regards,
-- 
Théo Lebrun <theo.lebrun@bootlin.com>


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy