[PATCH v3 0/2] phy: qcom: edp: Add DP/eDP switch for phys

[Yongxing Mou <yongxing.mou@oss.qualcomm.com>]

Currently the PHY selects the DP/eDP configuration tables in a fixed way,
choosing the table when enable. This driver has known issues:
1. The selected table does not match the actual platform mode.
2. It cannot support both modes at the same time.

As discussed here[1], this series:
1. Cleans up duplicated and incorrect tables based on the HPG.
2. Fixes the LDO programming error in eDP mode.
3. Adds DP/eDP mode switching support.

Note: x1e80100/sa8775p/sc7280 have been tested, while glymur/sc8280xp
have not been tested.

[1] https://lore.kernel.org/all/20260119-klm_dpphy-v2-1-52252190940b@oss.qualcomm.com/

Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
---
Changes in v3:
- Rebase to next-20260224.[Dmitry]
- Only enable TX1 LDO when lane counts > 2.[Konrad]
- Link to v2: https://lore.kernel.org/all/20260213-edp_phy-v2-0-43c40976435e@oss.qualcomm.com/

Changes in v2:
- Combine the third patch with the first one.[Dmitry]
- Fix code formatting issues.[Konrad][Dmitry]
- Update the commit message description.[Dmitry][Konrad]
- Fix kodiak swing/pre_emp table values.[Konrad]

---
Yongxing Mou (2):
      phy: qcom: edp: Add eDP/DP mode switch support
      phy: qcom: edp: Add per-version LDO configuration callback

 drivers/phy/qualcomm/phy-qcom-edp.c | 176 ++++++++++++++++++++++++++----------
 1 file changed, 129 insertions(+), 47 deletions(-)
---
base-commit: 3ef088b0c5772a6f75634e54aa34f5fc0a2c041c
change-id: 20260205-edp_phy-1eca3ed074c0

Best regards,
-- 
Yongxing Mou <yongxing.mou@oss.qualcomm.com>


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy