public inbox for linux-phy@lists.infradead.org
 help / color / mirror / Atom feed
From: Rustam Adilov <adilov@disroot.org>
To: Vinod Koul <vkoul@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Stanley Chang <stanley_chang@realtek.com>,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Rustam Adilov <adilov@disroot.org>,
	Michael Zavertkin <misha.zavertkin@mail.ru>
Subject: [PATCH v2 2/6] phy: realtek: usb2: introduce read and write functions to driver data
Date: Fri, 27 Mar 2026 21:06:34 +0500	[thread overview]
Message-ID: <20260327160638.15134-3-adilov@disroot.org> (raw)
In-Reply-To: <20260327160638.15134-1-adilov@disroot.org>

RTL9607C is a big endian SoC but has little endian USB host controller and
thus, reads and writes to the reg_gusb2phyacc0 should go through
le32_to_cpu and cpu_to_le32 functions respectively. This doesn't apply to
vstatus register though.

To handle this situation, introduce read and write functions to the driver
data and create 2 variations of reads and write function with le32 function
in it and without.

Adjust all instances of utmi_wait_register function to now include the read
function as one of its arguments.

Assign the existing phy configuration for RTD SoCs to the default phy_read
and phy_write functions.

Co-developed-by: Michael Zavertkin <misha.zavertkin@mail.ru>
Signed-off-by: Michael Zavertkin <misha.zavertkin@mail.ru>
Signed-off-by: Rustam Adilov <adilov@disroot.org>
---
 drivers/phy/realtek/phy-rtk-usb2.c | 73 ++++++++++++++++++++++++------
 1 file changed, 60 insertions(+), 13 deletions(-)

diff --git a/drivers/phy/realtek/phy-rtk-usb2.c b/drivers/phy/realtek/phy-rtk-usb2.c
index f5d2f0c3376a..e65b8525b88b 100644
--- a/drivers/phy/realtek/phy-rtk-usb2.c
+++ b/drivers/phy/realtek/phy-rtk-usb2.c
@@ -67,6 +67,9 @@ struct phy_reg {
 	int vstatus_offset;
 	int vstatus_busy;
 	int new_reg_req;
+
+	u32 (*read)(void __iomem *reg);
+	void (*write)(u32 val, void __iomem *reg);
 };
 
 struct phy_data {
@@ -102,6 +105,9 @@ struct phy_cfg {
 	int vstatus_offset;
 	int vstatus_busy;
 	int new_reg_req;
+
+	u32 (*read)(void __iomem *reg);
+	void (*write)(u32 val, void __iomem *reg);
 };
 
 struct phy_parameter {
@@ -128,6 +134,26 @@ struct rtk_phy {
 	struct dentry *debug_dir;
 };
 
+static inline u32 phy_read(void __iomem *reg)
+{
+	return readl(reg);
+}
+
+static inline u32 phy_read_le(void __iomem *reg)
+{
+	return le32_to_cpu(readl(reg));
+}
+
+static inline void phy_write(u32 val, void __iomem *reg)
+{
+	writel(val, reg);
+}
+
+static inline void phy_write_le(u32 val, void __iomem *reg)
+{
+	writel(cpu_to_le32(val), reg);
+}
+
 /* mapping 0xE0 to 0 ... 0xE7 to 7, 0xF0 to 8 ,,, 0xF7 to 15 */
 static inline int page_addr_to_array_index(u8 addr)
 {
@@ -144,12 +170,13 @@ static inline u8 array_index_to_page_addr(int index)
 #define PHY_IO_TIMEOUT_USEC		(50000)
 #define PHY_IO_DELAY_US			(100)
 
-static inline int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
+static inline int utmi_wait_register(u32 (*read)(void __iomem *reg), void __iomem *reg, u32 mask,
+				     u32 result)
 {
 	int ret;
 	unsigned int val;
 
-	ret = read_poll_timeout(readl, val, ((val & mask) == result),
+	ret = read_poll_timeout(read, val, ((val & mask) == result),
 				PHY_IO_DELAY_US, PHY_IO_TIMEOUT_USEC, false, reg);
 	if (ret) {
 		pr_err("%s can't program USB phy\n", __func__);
@@ -168,25 +195,25 @@ static char rtk_phy_read(struct phy_reg *phy_reg, char addr)
 	addr -= OFFEST_PHY_READ;
 
 	/* polling until VBusy == 0 */
-	ret = utmi_wait_register(reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
+	ret = utmi_wait_register(phy_reg->read, reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
 	if (ret)
 		return (char)ret;
 
 	/* VCtrl = low nibble of addr, and set PHY_NEW_REG_REQ */
 	val = phy_reg->new_reg_req | (GET_LOW_NIBBLE(addr) << PHY_VCTRL_SHIFT);
-	writel(val, reg_gusb2phyacc0);
-	ret = utmi_wait_register(reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
+	phy_reg->write(val, reg_gusb2phyacc0);
+	ret = utmi_wait_register(phy_reg->read, reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
 	if (ret)
 		return (char)ret;
 
 	/* VCtrl = high nibble of addr, and set PHY_NEW_REG_REQ */
 	val = phy_reg->new_reg_req | (GET_HIGH_NIBBLE(addr) << PHY_VCTRL_SHIFT);
-	writel(val, reg_gusb2phyacc0);
-	ret = utmi_wait_register(reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
+	phy_reg->write(val, reg_gusb2phyacc0);
+	ret = utmi_wait_register(phy_reg->read, reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
 	if (ret)
 		return (char)ret;
 
-	val = readl(reg_gusb2phyacc0);
+	val = phy_reg->read(reg_gusb2phyacc0);
 
 	return (char)(val & PHY_REG_DATA_MASK);
 }
@@ -202,23 +229,23 @@ static int rtk_phy_write(struct phy_reg *phy_reg, char addr, char data)
 	/* write data to VStatusOut2 (data output to phy) */
 	writel((u32)data << shift_bits, reg_wrap_vstatus + phy_reg->vstatus_offset);
 
-	ret = utmi_wait_register(reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
+	ret = utmi_wait_register(phy_reg->read, reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
 	if (ret)
 		return ret;
 
 	/* VCtrl = low nibble of addr, set PHY_NEW_REG_REQ */
 	val = phy_reg->new_reg_req | (GET_LOW_NIBBLE(addr) << PHY_VCTRL_SHIFT);
 
-	writel(val, reg_gusb2phyacc0);
-	ret = utmi_wait_register(reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
+	phy_reg->write(val, reg_gusb2phyacc0);
+	ret = utmi_wait_register(phy_reg->read, reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
 	if (ret)
 		return ret;
 
 	/* VCtrl = high nibble of addr, set PHY_NEW_REG_REQ */
 	val = phy_reg->new_reg_req | (GET_HIGH_NIBBLE(addr) << PHY_VCTRL_SHIFT);
 
-	writel(val, reg_gusb2phyacc0);
-	ret = utmi_wait_register(reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
+	phy_reg->write(val, reg_gusb2phyacc0);
+	ret = utmi_wait_register(phy_reg->read, reg_gusb2phyacc0, phy_reg->vstatus_busy, 0);
 	if (ret)
 		return ret;
 
@@ -984,6 +1011,8 @@ static int parse_phy_data(struct rtk_phy *rtk_phy)
 		phy_parameter->phy_reg.vstatus_offset = phy_cfg->vstatus_offset;
 		phy_parameter->phy_reg.vstatus_busy = phy_cfg->vstatus_busy;
 		phy_parameter->phy_reg.new_reg_req = phy_cfg->new_reg_req;
+		phy_parameter->phy_reg.read = phy_cfg->read;
+		phy_parameter->phy_reg.write = phy_cfg->write;
 
 		if (of_property_read_bool(np, "realtek,inverse-hstx-sync-clock"))
 			phy_parameter->inverse_hstx_sync_clock = true;
@@ -1098,6 +1127,8 @@ static const struct phy_cfg rtd1295_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = phy_read,
+	.write = phy_write,
 };
 
 static const struct phy_cfg rtd1395_phy_cfg = {
@@ -1125,6 +1156,8 @@ static const struct phy_cfg rtd1395_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = phy_read,
+	.write = phy_write,
 };
 
 static const struct phy_cfg rtd1395_phy_cfg_2port = {
@@ -1152,6 +1185,8 @@ static const struct phy_cfg rtd1395_phy_cfg_2port = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = phy_read,
+	.write = phy_write,
 };
 
 static const struct phy_cfg rtd1619_phy_cfg = {
@@ -1177,6 +1212,8 @@ static const struct phy_cfg rtd1619_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = phy_read,
+	.write = phy_write,
 };
 
 static const struct phy_cfg rtd1319_phy_cfg = {
@@ -1206,6 +1243,8 @@ static const struct phy_cfg rtd1319_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = phy_read,
+	.write = phy_write,
 };
 
 static const struct phy_cfg rtd1312c_phy_cfg = {
@@ -1234,6 +1273,8 @@ static const struct phy_cfg rtd1312c_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = phy_read,
+	.write = phy_write,
 };
 
 static const struct phy_cfg rtd1619b_phy_cfg = {
@@ -1262,6 +1303,8 @@ static const struct phy_cfg rtd1619b_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = phy_read,
+	.write = phy_write,
 };
 
 static const struct phy_cfg rtd1319d_phy_cfg = {
@@ -1290,6 +1333,8 @@ static const struct phy_cfg rtd1319d_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = phy_read,
+	.write = phy_write,
 };
 
 static const struct phy_cfg rtd1315e_phy_cfg = {
@@ -1319,6 +1364,8 @@ static const struct phy_cfg rtd1315e_phy_cfg = {
 	.vstatus_offset = 0,
 	.vstatus_busy = PHY_VSTS_BUSY,
 	.new_reg_req = PHY_NEW_REG_REQ,
+	.read = phy_read,
+	.write = phy_write,
 };
 
 static const struct of_device_id usbphy_rtk_dt_match[] = {
-- 
2.53.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2026-03-27 16:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-27 16:06 [PATCH v2 0/6] phy: realtek: usb2: support for RTL9607C USB2 PHY Rustam Adilov
2026-03-27 16:06 ` [PATCH v2 1/6] phy: realtek: usb2: introduce vstatus/new_reg_req variables to driver data Rustam Adilov
2026-03-27 16:06 ` Rustam Adilov [this message]
2026-03-27 16:06 ` [PATCH v2 3/6] dt-bindings: phy: realtek,usb2phy.yaml: extend for resets and RTL9607C support Rustam Adilov
2026-03-27 16:06 ` [PATCH v2 4/6] phy: realtek: usb2: introduce reset controller struct Rustam Adilov
2026-03-27 16:06 ` [PATCH v2 5/6] phy: realtek: usb2: add support for RTL9607C USB2 PHY Rustam Adilov
2026-03-27 16:06 ` [PATCH v2 6/6] phy: realtek: usb2: Make configs available for MACH_REALTEK_RTL Rustam Adilov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260327160638.15134-3-adilov@disroot.org \
    --to=adilov@disroot.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=misha.zavertkin@mail.ru \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=stanley_chang@realtek.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox