[PATCH v2 5/6] phy: realtek: usb2: add support for RTL9607C USB2 PHY

[Rustam Adilov <adilov@disroot.org>]

Add support for the usb2 phy of RTL9607C series based SoCs.
Add the macros and phy config struct for rtl9607.

RTL9607C requires to clear a "force host disconnect" bit in the
specific register (which is at an offset from reg_wrap_vstatus)
before proceeding with phy parameter writes.

Add the bool variable to the driver data struct and hide this whole
procedure under the if statement that checks this new variable.

Co-developed-by: Michael Zavertkin <misha.zavertkin@mail.ru>
Signed-off-by: Michael Zavertkin <misha.zavertkin@mail.ru>
Signed-off-by: Rustam Adilov <adilov@disroot.org>
---
 drivers/phy/realtek/phy-rtk-usb2.c | 57 ++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/drivers/phy/realtek/phy-rtk-usb2.c b/drivers/phy/realtek/phy-rtk-usb2.c
index 070cba1e0e0a..bf22d12681dc 100644
--- a/drivers/phy/realtek/phy-rtk-usb2.c
+++ b/drivers/phy/realtek/phy-rtk-usb2.c
@@ -26,6 +26,12 @@
 #define PHY_VCTRL_SHIFT 8
 #define PHY_REG_DATA_MASK 0xff
 
+#define PHY_9607_VSTS_BUSY BIT(17)
+#define PHY_9607_NEW_REG_REQ BIT(13)
+
+#define PHY_9607_FORCE_DISCONNECT_REG 0x10
+#define PHY_9607_FORCE_DISCONNECT_BIT BIT(5)
+
 #define GET_LOW_NIBBLE(addr) ((addr) & 0x0f)
 #define GET_HIGH_NIBBLE(addr) (((addr) & 0xf0) >> 4)
 
@@ -109,6 +115,7 @@ struct phy_cfg {
 
 	u32 (*read)(void __iomem *reg);
 	void (*write)(u32 val, void __iomem *reg);
+	bool force_host_disconnect;
 };
 
 struct phy_parameter {
@@ -614,6 +621,16 @@ static int do_rtk_phy_init(struct rtk_phy *rtk_phy, int index)
 		goto do_toggle;
 	}
 
+	if (phy_cfg->force_host_disconnect) {
+		/* disable force-host-disconnect */
+		u32 temp = readl(phy_reg->reg_wrap_vstatus + PHY_9607_FORCE_DISCONNECT_REG);
+
+		temp &= ~PHY_9607_FORCE_DISCONNECT_BIT;
+		writel(temp, phy_reg->reg_wrap_vstatus + PHY_9607_FORCE_DISCONNECT_REG);
+
+		mdelay(10);
+	}
+
 	/* Set page 0 */
 	phy_data_page = phy_cfg->page0;
 	rtk_phy_set_page(phy_reg, 0);
@@ -1141,6 +1158,7 @@ static const struct phy_cfg rtd1295_phy_cfg = {
 	.new_reg_req = PHY_NEW_REG_REQ,
 	.read = phy_read,
 	.write = phy_write,
+	.force_host_disconnect = false,
 };
 
 static const struct phy_cfg rtd1395_phy_cfg = {
@@ -1170,6 +1188,7 @@ static const struct phy_cfg rtd1395_phy_cfg = {
 	.new_reg_req = PHY_NEW_REG_REQ,
 	.read = phy_read,
 	.write = phy_write,
+	.force_host_disconnect = false,
 };
 
 static const struct phy_cfg rtd1395_phy_cfg_2port = {
@@ -1199,6 +1218,7 @@ static const struct phy_cfg rtd1395_phy_cfg_2port = {
 	.new_reg_req = PHY_NEW_REG_REQ,
 	.read = phy_read,
 	.write = phy_write,
+	.force_host_disconnect = false,
 };
 
 static const struct phy_cfg rtd1619_phy_cfg = {
@@ -1226,6 +1246,7 @@ static const struct phy_cfg rtd1619_phy_cfg = {
 	.new_reg_req = PHY_NEW_REG_REQ,
 	.read = phy_read,
 	.write = phy_write,
+	.force_host_disconnect = false,
 };
 
 static const struct phy_cfg rtd1319_phy_cfg = {
@@ -1257,6 +1278,7 @@ static const struct phy_cfg rtd1319_phy_cfg = {
 	.new_reg_req = PHY_NEW_REG_REQ,
 	.read = phy_read,
 	.write = phy_write,
+	.force_host_disconnect = false,
 };
 
 static const struct phy_cfg rtd1312c_phy_cfg = {
@@ -1287,6 +1309,7 @@ static const struct phy_cfg rtd1312c_phy_cfg = {
 	.new_reg_req = PHY_NEW_REG_REQ,
 	.read = phy_read,
 	.write = phy_write,
+	.force_host_disconnect = false,
 };
 
 static const struct phy_cfg rtd1619b_phy_cfg = {
@@ -1317,6 +1340,7 @@ static const struct phy_cfg rtd1619b_phy_cfg = {
 	.new_reg_req = PHY_NEW_REG_REQ,
 	.read = phy_read,
 	.write = phy_write,
+	.force_host_disconnect = false,
 };
 
 static const struct phy_cfg rtd1319d_phy_cfg = {
@@ -1347,6 +1371,7 @@ static const struct phy_cfg rtd1319d_phy_cfg = {
 	.new_reg_req = PHY_NEW_REG_REQ,
 	.read = phy_read,
 	.write = phy_write,
+	.force_host_disconnect = false,
 };
 
 static const struct phy_cfg rtd1315e_phy_cfg = {
@@ -1378,6 +1403,37 @@ static const struct phy_cfg rtd1315e_phy_cfg = {
 	.new_reg_req = PHY_NEW_REG_REQ,
 	.read = phy_read,
 	.write = phy_write,
+	.force_host_disconnect = false,
+};
+
+static const struct phy_cfg rtl9607_phy_cfg = {
+	.page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE,
+	.page0 = { [0] = {0xe0, 0x95},
+		   [4] = {0xe4, 0x6a},
+		  [12] = {0xf3, 0x31}, },
+	.page1_size = MAX_USB_PHY_PAGE1_DATA_SIZE,
+	.page1 = { [0] = {0xe0, 0x26}, },
+	.page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE,
+	.page2 = { [7] = {0xe7, 0x33}, },
+	.num_phy = 1,
+	.check_efuse = false,
+	.check_efuse_version = CHECK_EFUSE_V2,
+	.efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE,
+	.dc_driving_mask = 0x1f,
+	.efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE,
+	.dc_disconnect_mask = 0xf,
+	.usb_dc_disconnect_at_page0 = true,
+	.do_toggle = true,
+	.do_toggle_driving = false,
+	.driving_updated_for_dev_dis = 0x8,
+	.use_default_parameter = false,
+	.is_double_sensitivity_mode = true,
+	.vstatus_offset = 0xc,
+	.vstatus_busy = PHY_9607_VSTS_BUSY,
+	.new_reg_req = PHY_9607_NEW_REG_REQ,
+	.read = phy_read_le,
+	.write = phy_write_le,
+	.force_host_disconnect = true,
 };
 
 static const struct of_device_id usbphy_rtk_dt_match[] = {
@@ -1390,6 +1446,7 @@ static const struct of_device_id usbphy_rtk_dt_match[] = {
 	{ .compatible = "realtek,rtd1395-usb2phy-2port", .data = &rtd1395_phy_cfg_2port },
 	{ .compatible = "realtek,rtd1619-usb2phy", .data = &rtd1619_phy_cfg },
 	{ .compatible = "realtek,rtd1619b-usb2phy", .data = &rtd1619b_phy_cfg },
+	{ .compatible = "realtek,rtl9607-usb2phy", .data = &rtl9607_phy_cfg },
 	{},
 };
 MODULE_DEVICE_TABLE(of, usbphy_rtk_dt_match);
-- 
2.53.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy