Re: [PATCH v5 0/6] phy: realtek: usb2: support for RTL9607C USB2 PHY

From: Vladimir Oltean <olteanv@gmail.com>
To: Rustam Adilov <adilov@disroot.org>
Cc: Vinod Koul <vkoul@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Stanley Chang <stanley_chang@realtek.com>,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 0/6] phy: realtek: usb2: support for RTL9607C USB2 PHY
Date: Tue, 5 May 2026 14:37:21 +0300	[thread overview]
Message-ID: <20260505113721.ur4qd4udu7jas473@skbuf> (raw)
In-Reply-To: <20260420191941.81834-1-adilov@disroot.org>

On Tue, Apr 21, 2026 at 12:19:35AM +0500, Rustam Adilov wrote:
> This patch series for Realtek USB2 PHY driver adds support for RTL9607C
> USB2 PHY.
> 
> RTL9607C is a big endian MIPS CPU which is quite far from RTD series SoCs
> supported by realtek usb2 phy driver, but the phy initilization is found
> to be very indentical in most areas.
> 
> Most of the code was based on the Realtek's usb driver from the GPL tarball
> in [1] and adjusted to fit into the realtek usb2 phy driver code format.
> 
> The patch series was split into smaller patches that add/change something
> in the driver that are not exactly related to RTL9607C and that also
> helps for easier review. That also means, patch 5 depends on all the prior
> patches that come before it.
> 
> USB2 PHY on RTL9607C is primarly used for its internal OHCI/EHCI controllers.
> 
> [1] - https://github.com/jameywine/GPL-for-GP3000/blob/main/linux-5.10.x/arch/mips/rtl9607c/usb.c
> 
> ---

Could you go through Patchwork and reply inline to the issues found,
stating whether you are or are not going to resolve them?
https://patchwork.kernel.org/project/linux-phy/list/?series=1083475

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy