[PATCH v7 4/6] clk: en7523: Add support for selecting the Serdes port in SCU

[Christian Marangi <ansuelsmth@gmail.com>]

In the SCU register for clock and reset, there are also some register to
select the Serdes port mode. The Airoha AN7581 SoC have 4 different Serdes
that can switch between PCIe, USB or Ethernet mode.

Add a simple PHY provider that expose the .set_mode OP to toggle the
requested mode for the Serdes port.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/clk/Kconfig      |   1 +
 drivers/clk/clk-en7523.c | 207 ++++++++++++++++++++++++++++++++++++++-
 2 files changed, 205 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index b2efbe9f6acb..e60a824b5117 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -221,6 +221,7 @@ config COMMON_CLK_EN7523
 	bool "Clock driver for Airoha/EcoNet SoC system clocks"
 	depends on OF
 	depends on ARCH_AIROHA || ECONET || COMPILE_TEST
+	select GENERIC_PHY
 	default ARCH_AIROHA
 	help
 	  This driver provides the fixed clocks and gates present on Airoha
diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
index 1ab0e2eca5d3..58ec071388a4 100644
--- a/drivers/clk/clk-en7523.c
+++ b/drivers/clk/clk-en7523.c
@@ -6,6 +6,8 @@
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset-controller.h>
@@ -14,6 +16,7 @@
 #include <dt-bindings/reset/airoha,en7581-reset.h>
 #include <dt-bindings/clock/econet,en751221-scu.h>
 #include <dt-bindings/reset/econet,en751221-scu.h>
+#include <dt-bindings/soc/airoha,scu-ssr.h>
 
 #define RST_NR_PER_BANK			32
 
@@ -40,9 +43,22 @@
 #define   REG_HIR_MASK			GENMASK(31, 16)
 /* EN7581 */
 #define REG_NP_SCU_PCIC			0x88
+#define REG_NP_SCU_SSR3			0x94
+#define REG_SSUSB_HSGMII_SEL_MASK	BIT(29)
+#define REG_SSUSB_HSGMII_SEL_HSGMII	FIELD_PREP_CONST(REG_SSUSB_HSGMII_SEL_MASK, 0x0)
+#define REG_SSUSB_HSGMII_SEL_USB	FIELD_PREP_CONST(REG_SSUSB_HSGMII_SEL_MASK, 0x1)
 #define REG_NP_SCU_SSTR			0x9c
 #define REG_PCIE_XSI0_SEL_MASK		GENMASK(14, 13)
+#define REG_PCIE_XSI0_SEL_PCIE		FIELD_PREP_CONST(REG_PCIE_XSI0_SEL_MASK, 0x0)
+#define REG_PCIE_XSI0_SEL_XFI		FIELD_PREP_CONST(REG_PCIE_XSI0_SEL_MASK, 0x1)
+#define REG_PCIE_XSI0_SEL_HSGMII	FIELD_PREP_CONST(REG_PCIE_XSI0_SEL_MASK, 0x2)
 #define REG_PCIE_XSI1_SEL_MASK		GENMASK(12, 11)
+#define REG_PCIE_XSI1_SEL_PCIE		FIELD_PREP_CONST(REG_PCIE_XSI1_SEL_MASK, 0x0)
+#define REG_PCIE_XSI1_SEL_XFI		FIELD_PREP_CONST(REG_PCIE_XSI1_SEL_MASK, 0x1)
+#define REG_PCIE_XSI1_SEL_HSGMII	FIELD_PREP_CONST(REG_PCIE_XSI1_SEL_MASK, 0x2)
+#define REG_USB_PCIE_SEL_MASK		BIT(3)
+#define REG_USB_PCIE_SEL_PCIE		FIELD_PREP_CONST(REG_USB_PCIE_SEL_MASK, 0x0)
+#define REG_USB_PCIE_SEL_USB		FIELD_PREP_CONST(REG_USB_PCIE_SEL_MASK, 0x1)
 #define REG_CRYPTO_CLKSRC2		0x20c
 /* EN751221 */
 #define EN751221_REG_SPI_DIV		0x0cc
@@ -81,6 +97,8 @@ enum en_hir {
 	HIR_MAX		= 14,
 };
 
+#define EN_SERDES_PHY_NUM		4
+
 struct en_clk_desc {
 	int id;
 	const char *name;
@@ -113,6 +131,16 @@ struct en_rst_data {
 	struct reset_controller_dev rcdev;
 };
 
+struct en_serdes_phy_instance {
+	struct phy *phy;
+	unsigned int serdes_port;
+};
+
+struct en_clk_priv {
+	void __iomem *base;
+	struct en_serdes_phy_instance *serdes_phys[EN_SERDES_PHY_NUM];
+};
+
 struct en_clk_soc_data {
 	u32 num_clocks;
 	const struct clk_ops pcie_ops;
@@ -830,12 +858,173 @@ static int en7581_reset_register(struct device *dev, void __iomem *base,
 	return devm_reset_controller_register(dev, &rst_data->rcdev);
 }
 
+static int en7581_serdes_phy_set_mode(struct phy *phy, enum phy_mode mode,
+				      int submode)
+{
+	struct en_serdes_phy_instance *instance = phy_get_drvdata(phy);
+	struct en_clk_priv *priv = dev_get_drvdata(phy->dev.parent);
+	u32 reg, mask, sel, val;
+
+	switch (instance->serdes_port) {
+	case AIROHA_SCU_SERDES_PCIE1:
+		reg = REG_NP_SCU_SSTR;
+		mask = REG_PCIE_XSI0_SEL_MASK;
+
+		if (mode != PHY_MODE_ETHERNET && mode != PHY_MODE_PCIE)
+			return -EINVAL;
+
+		if (mode == PHY_MODE_ETHERNET) {
+			switch (submode) {
+			case PHY_INTERFACE_MODE_USXGMII:
+			case PHY_INTERFACE_MODE_10GBASER:
+				sel = REG_PCIE_XSI0_SEL_XFI;
+				break;
+			case PHY_INTERFACE_MODE_SGMII:
+			case PHY_INTERFACE_MODE_1000BASEX:
+			case PHY_INTERFACE_MODE_2500BASEX:
+				sel = REG_PCIE_XSI0_SEL_HSGMII;
+				break;
+			default:
+				return -EINVAL;
+			}
+		} else {
+			sel = REG_PCIE_XSI0_SEL_PCIE;
+		}
+
+		break;
+	case AIROHA_SCU_SERDES_PCIE2:
+		if (mode != PHY_MODE_ETHERNET && mode != PHY_MODE_PCIE)
+			return -EINVAL;
+
+		if (mode == PHY_MODE_ETHERNET) {
+			switch (submode) {
+			case PHY_INTERFACE_MODE_USXGMII:
+			case PHY_INTERFACE_MODE_10GBASER:
+				sel = REG_PCIE_XSI1_SEL_XFI;
+				break;
+			case PHY_INTERFACE_MODE_SGMII:
+			case PHY_INTERFACE_MODE_1000BASEX:
+			case PHY_INTERFACE_MODE_2500BASEX:
+				sel = REG_PCIE_XSI1_SEL_HSGMII;
+				break;
+			default:
+				return -EINVAL;
+			}
+		} else {
+			sel = REG_PCIE_XSI1_SEL_PCIE;
+		}
+
+		break;
+	case AIROHA_SCU_SERDES_USB1:
+		reg = REG_NP_SCU_SSR3;
+		mask = REG_SSUSB_HSGMII_SEL_MASK;
+
+		if (mode != PHY_MODE_ETHERNET && mode != PHY_MODE_USB_DEVICE &&
+		    mode != PHY_MODE_USB_DEVICE_SS)
+			return -EINVAL;
+
+		if (mode == PHY_MODE_ETHERNET)
+			sel = REG_SSUSB_HSGMII_SEL_HSGMII;
+		else
+			sel = REG_SSUSB_HSGMII_SEL_USB;
+
+		break;
+	case AIROHA_SCU_SERDES_USB2:
+		reg = REG_NP_SCU_SSTR;
+		mask = REG_USB_PCIE_SEL_MASK;
+
+		if (mode != PHY_MODE_PCIE && mode != PHY_MODE_USB_DEVICE &&
+		    mode != PHY_MODE_USB_DEVICE_SS)
+			return -EINVAL;
+
+		if (mode == PHY_MODE_PCIE)
+			sel = REG_USB_PCIE_SEL_PCIE;
+		else
+			sel = REG_USB_PCIE_SEL_USB;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val = readl(priv->base + reg);
+	val &= ~mask;
+	val |= sel;
+	writel(val, priv->base + reg);
+
+	return 0;
+}
+
+static const struct phy_ops en7581_serdes_phy_ops = {
+	.set_mode	= en7581_serdes_phy_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *en7581_serdes_phy_xlate(struct device *dev,
+					   const struct of_phandle_args *args)
+{
+	struct en_clk_priv *priv = dev_get_drvdata(dev);
+	struct en_serdes_phy_instance *instance;
+	unsigned int serdes_port;
+
+	if (args->args_count != 1) {
+		dev_err(dev, "invalid number of cells in 'phy' property\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	serdes_port = args->args[0];
+	if (serdes_port >= EN_SERDES_PHY_NUM) {
+		dev_err(dev, "invalid serdes port: %d\n", serdes_port);
+		return ERR_PTR(-EINVAL);
+	}
+
+	instance = priv->serdes_phys[serdes_port];
+	if (!instance) {
+		dev_err(dev, "failed to find appropriate serdes phy\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	return instance->phy;
+}
+
+static int en7581_serdes_phy_register(struct device *dev)
+{
+	struct en_clk_priv *priv = dev_get_drvdata(dev);
+	struct phy_provider *phy_provider;
+	int i;
+
+	for (i = 0; i < EN_SERDES_PHY_NUM; i++) {
+		struct en_serdes_phy_instance *instance;
+
+		instance = devm_kzalloc(dev, sizeof(*instance),
+					GFP_KERNEL);
+		if (!instance)
+			return -ENOMEM;
+
+		instance->phy = devm_phy_create(dev, NULL,
+						&en7581_serdes_phy_ops);
+		if (IS_ERR(instance->phy))
+			return dev_err_probe(dev, PTR_ERR(instance->phy), "failed to create phy\n");
+
+		instance->serdes_port = i;
+		priv->serdes_phys[i] = instance;
+
+		phy_set_drvdata(instance->phy, instance);
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev, en7581_serdes_phy_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
 static int en7581_clk_hw_init(struct platform_device *pdev,
 			      struct clk_hw_onecell_data *clk_data)
 {
+	struct en_clk_priv *priv = platform_get_drvdata(pdev);
 	struct regmap *map;
 	void __iomem *base;
 	u32 val;
+	int ret;
 
 	map = syscon_regmap_lookup_by_compatible("airoha,en7581-chip-scu");
 	if (IS_ERR(map))
@@ -845,6 +1034,8 @@ static int en7581_clk_hw_init(struct platform_device *pdev,
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
+	priv->base = base;
+
 	en7581_register_clocks(&pdev->dev, clk_data, map, base);
 
 	val = readl(base + REG_NP_SCU_SSTR);
@@ -853,9 +1044,12 @@ static int en7581_clk_hw_init(struct platform_device *pdev,
 	val = readl(base + REG_NP_SCU_PCIC);
 	writel(val | 3, base + REG_NP_SCU_PCIC);
 
-	return en7581_reset_register(&pdev->dev, base, en7581_rst_map,
-				     ARRAY_SIZE(en7581_rst_map),
-				     en7581_rst_ofs);
+	ret = en7581_reset_register(&pdev->dev, base, en7581_rst_map,
+				    ARRAY_SIZE(en7581_rst_map), en7581_rst_ofs);
+	if (ret)
+		return ret;
+
+	return en7581_serdes_phy_register(&pdev->dev);
 }
 
 static enum en_hir get_hw_id(void __iomem *np_base)
@@ -962,16 +1156,23 @@ static int en7523_clk_probe(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 	const struct en_clk_soc_data *soc_data;
 	struct clk_hw_onecell_data *clk_data;
+	struct en_clk_priv *priv;
 	int r;
 
 	soc_data = device_get_match_data(&pdev->dev);
 
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
 	clk_data = devm_kzalloc(&pdev->dev,
 				struct_size(clk_data, hws, soc_data->num_clocks),
 				GFP_KERNEL);
 	if (!clk_data)
 		return -ENOMEM;
 
+	platform_set_drvdata(pdev, priv);
+
 	clk_data->num = soc_data->num_clocks;
 	r = soc_data->hw_init(pdev, clk_data);
 	if (r)
-- 
2.53.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy