From: Felix Gu <ustc.gu@gmail.com>
To: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: linux-phy@lists.infradead.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org, Felix Gu <ustc.gu@gmail.com>
Subject: [PATCH v2 3/3] phy: renesas: rcar-gen2: Use dev_err_probe() in probe
Date: Tue, 04 Aug 2026 23:24:19 +0800 [thread overview]
Message-ID: <20260804-rcar-gen2-v2-3-829cb84112ca@gmail.com> (raw)
In-Reply-To: <20260804-rcar-gen2-v2-0-829cb84112ca@gmail.com>
Convert the error paths in rcar_gen2_phy_probe() to dev_err_probe().
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
---
drivers/phy/renesas/phy-rcar-gen2.c | 35 ++++++++++++++---------------------
1 file changed, 14 insertions(+), 21 deletions(-)
diff --git a/drivers/phy/renesas/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c
index b18727ed41a1..581f6768e2bb 100644
--- a/drivers/phy/renesas/phy-rcar-gen2.c
+++ b/drivers/phy/renesas/phy-rcar-gen2.c
@@ -342,17 +342,13 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
const struct rcar_gen2_phy_data *data;
int i = 0;
- if (!dev->of_node) {
- dev_err(dev,
- "This driver is required to be instantiated from device tree\n");
- return -EINVAL;
- }
+ if (!dev->of_node)
+ return dev_err_probe(dev, -EINVAL,
+ "This driver is required to be instantiated from device tree\n");
clk = devm_clk_get(dev, "usbhs");
- if (IS_ERR(clk)) {
- dev_err(dev, "Can't get USBHS clock\n");
- return PTR_ERR(clk);
- }
+ if (IS_ERR(clk))
+ return dev_err_probe(dev, PTR_ERR(clk), "Can't get USBHS clock\n");
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
@@ -388,10 +384,9 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
channel->selected_phy = -1;
error = of_property_read_u32(np, "reg", &channel_num);
- if (error || channel_num >= data->num_channels) {
- dev_err(dev, "Invalid \"reg\" property\n");
- return error ?: -EINVAL;
- }
+ if (error || channel_num >= data->num_channels)
+ return dev_err_probe(dev, error ?: -EINVAL,
+ "Invalid \"reg\" property\n");
channel->select_mask = select_mask[channel_num];
for (n = 0; n < PHYS_PER_CHANNEL; n++) {
@@ -403,10 +398,9 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
phy->phy = devm_phy_create(dev, NULL,
data->gen2_phy_ops);
- if (IS_ERR(phy->phy)) {
- dev_err(dev, "Failed to create PHY\n");
- return PTR_ERR(phy->phy);
- }
+ if (IS_ERR(phy->phy))
+ return dev_err_probe(dev, PTR_ERR(phy->phy),
+ "Failed to create PHY\n");
phy_set_drvdata(phy->phy, phy);
}
@@ -414,10 +408,9 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
}
provider = devm_of_phy_provider_register(dev, rcar_gen2_phy_xlate);
- if (IS_ERR(provider)) {
- dev_err(dev, "Failed to register PHY provider\n");
- return PTR_ERR(provider);
- }
+ if (IS_ERR(provider))
+ return dev_err_probe(dev, PTR_ERR(provider),
+ "Failed to register PHY provider\n");
dev_set_drvdata(dev, drv);
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2026-08-04 15:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-04 15:24 [PATCH v2 0/3] phy: renesas: rcar-gen2: three cleanups Felix Gu
2026-08-04 15:24 ` [PATCH v2 1/3] phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure Felix Gu
2026-08-04 15:38 ` sashiko-bot
2026-08-04 15:24 ` [PATCH v2 2/3] phy: renesas: rcar-gen2: Return -EINVAL for out-of-range channel reg Felix Gu
2026-08-04 15:49 ` sashiko-bot
2026-08-04 15:24 ` Felix Gu [this message]
2026-08-04 15:59 ` [PATCH v2 3/3] phy: renesas: rcar-gen2: Use dev_err_probe() in probe sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260804-rcar-gen2-v2-3-829cb84112ca@gmail.com \
--to=ustc.gu@gmail.com \
--cc=geert+renesas@glider.be \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=neil.armstrong@linaro.org \
--cc=sergei.shtylyov@cogentembedded.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox