[PATCH v6 3/5] phy: snps-eusb2: Set phy type to EUSB2

From: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
To: Vinod Koul <vkoul@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Manivannan Sadhasivam <mani@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-usb@vger.kernel.org,
	Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Subject: [PATCH v6 3/5] phy: snps-eusb2: Set phy type to EUSB2
Date: Wed, 26 Aug 2026 22:32:53 +0530	[thread overview]
Message-ID: <20260826-eusb2-interrupt-v6-v6-3-ae2601cfa80c@oss.qualcomm.com> (raw)
In-Reply-To: <20260826-eusb2-interrupt-v6-v6-0-ae2601cfa80c@oss.qualcomm.com>

USB controllers like DWC3 are agnostic of the kind of phy (USB2/eUSB2)
connected to it. Set the phy type to EUSB2 to let the controller know
the phy type when queried during its probe.

Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 drivers/phy/phy-snps-eusb2.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c
index f90bf7e95463..fe4ce9d752f7 100644
--- a/drivers/phy/phy-snps-eusb2.c
+++ b/drivers/phy/phy-snps-eusb2.c
@@ -597,6 +597,8 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev)
 		return PTR_ERR(generic_phy);
 	}
 
+	phy_set_type(generic_phy, PHY_TYPE_EUSB2);
+
 	dev_set_drvdata(dev, phy);
 	phy_set_drvdata(generic_phy, phy);
 

-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
