From: sashiko-bot@kernel.org
To: "Coia Prant" <coiaprant@gmail.com>
Cc: devicetree@vger.kernel.org, vkoul@kernel.org,
conor+dt@kernel.org, olteanv@gmail.com,
linux-phy@lists.infradead.org, neil.armstrong@linaro.org,
robh@kernel.org
Subject: Re: [PATCH v10 1/2] dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property
Date: Mon, 05 Oct 2026 22:19:13 +0000 [thread overview]
Message-ID: <20261005221913.D20A51F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20261005221229.1095843-2-coiaprant@gmail.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] dt-bindings: schema validation fails for non-RK3568 variants due to default injection
--
commit f30c2450528092b975c8899ad617f4fa20dab422
Author: Coia Prant <coiaprant@gmail.com>
dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property
On RK3568, the SGMII interface can be routed to either GMAC0 or
GMAC1 via the pipe_sgmii_mac_sel bit in the pipe GRF registers.
Add the optional "rockchip,sgmii-mac-sel" property to allow the
device tree to select which GMAC controller is used for SGMII.
> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> index 379b08bd9e97a..8e898bce9af73 100644
> --- a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> @@ -80,6 +80,15 @@ properties:
> description:
> Some additional pipe settings are accessed through GRF regs.
>
> + rockchip,sgmii-mac-sel:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
> + default: 1
> + description:
> + Select gmac0 or gmac1 to be used as SGMII controller.
> + The hardware reset value is GMAC1 (1). Set this to 0 to route
> + SGMII to GMAC0.
> +
> "#phy-cells":
> const: 1
[ ... ]
> @@ -105,6 +114,10 @@ allOf:
> maxItems: 1
> reset-names:
> maxItems: 1
> + rockchip,sgmii-mac-sel: true
> + else:
> + properties:
> + rockchip,sgmii-mac-sel: false
[Severity: Medium]
Will this break dtbs_check for non-RK3568 platforms?
When the dtschema tooling processes a device node for a non-RK3568 compatible
(like rockchip,rk3588-naneng-combphy), it injects the top-level default value
of 1 into the node data.
Then the allOf evaluation applies this else branch, which enforces
rockchip,sgmii-mac-sel: false (meaning the property must not exist).
The presence of the injected default value violates this constraint, causing
validation to fail.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261005221229.1095843-1-coiaprant@gmail.com?part=1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2026-10-05 22:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-05 22:12 [PATCH v10 0/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568 Coia Prant
2026-10-05 22:12 ` [PATCH v10 1/2] dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property Coia Prant
2026-10-05 22:19 ` sashiko-bot [this message]
2026-10-05 22:12 ` [PATCH v10 2/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568 Coia Prant
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261005221913.D20A51F000FF@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=coiaprant@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=neil.armstrong@linaro.org \
--cc=olteanv@gmail.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox