From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 7C3ECCA6002 for ; Thu, 8 Oct 2026 06:06:57 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=eQEWYQbuvPlfYJxwFVaxrHSozFDfUkRjjFEW4hoGmdk=; b=CjVUStRot1HHUa KNS4l6EWcQpTRYsQA/RaCLxQQNpmtoTXT0xnTFEenPsWipjuL/p+4txLNHGDku4V1jZBj21o4XN6D UMMajVCZ9bFOeSx0wOVG8LHHWSDDJUXUaK1VAYdMiwZ45qVnW736AyW2X0rxOIYbiP809S8Rb2dp3 xUzRsx4rcGQtA0suwGLGE5zyxWPrAcbspv5jU2FYMt46n2oUmnUW6LyRoUwn2RheJ/nIqzjSrTtwW k+51hSBB4e1BTUMaY0PtwyrOTJ6TgfSQ551N1COi0z0YN6KaKzKJX0C5laxSlPbp4FZ88RMyEtUbX kgiC1ShLs94uPOK/JRUQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.99.1 #2 (Red Hat Linux)) id 1xEhHN-00000003cAF-0n87; Thu, 08 Oct 2026 06:06:57 +0000 Received: from mail-pg1-x52c.google.com ([2607:f8b0:4864:20::52c]) by bombadil.infradead.org with esmtps (Exim 4.99.1 #2 (Red Hat Linux)) id 1xEhHJ-00000003c7d-2rKF for linux-phy@lists.infradead.org; Thu, 08 Oct 2026 06:06:56 +0000 Received: by mail-pg1-x52c.google.com with SMTP id 41be03b00d2f7-cc4b62d118aso1590624a12.2 for ; Wed, 07 Oct 2026 23:06:53 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1791439613; x=1792044413; darn=lists.infradead.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=Tpp/l8x0FFNoRUazKgX/VoKBSK9SpVfGhmopGIzKydQ=; b=QEhfeGZ0zt6SO612r3cl9i54HAWNijyaE2VGL5xgs3xKWZJUbiIH2KzsOcu7kSIJg6 2+xaxFkyjKq1/2xPY3vzn+NGRhrXwkg4F6QpQKS8phKtz8fV5ZesX+d/42F/poRSRRJh OMfaRzBWYkKNb6GfGCiyKyKvcnszG+4wQcILigHy4JGdTgaoC5VbezbPPTyFDuaVYO82 nvTI0Oo+AFRTqkN/gmSgVJuMPbRUGV170fUpYWmeImJoHkR6jMoQPgGORVBHUOg9OEvC ORkr3JQKK5VsGNQk2H9WDR5NPjcuiGwT0k8VeAGGlDOjuqRo76U7Q8yUs9ABsMhueOfs armA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1791439613; x=1792044413; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to:content-type; bh=Tpp/l8x0FFNoRUazKgX/VoKBSK9SpVfGhmopGIzKydQ=; b=lNDM9Ki0KI1kVG7YClKoCgaTN1rYju3hqG/7JoniE6qGFXbchxO5AhVQpCuhh3WQGq v908bkXsX5tOimz9YtVYbPfTx2FZipIZBYtA9oxNQgoPaVacO1I5oQ4NlytjwEnLEjo6 TFA4jGQASUISYwj/cGzInK5L5pduivx1EpAY0zb/VnZ4Nv2EF01ae6boUGn9U7KWmgaS l5mgmtWum0VNRmGZB4yJCDOYw7bRv/5noM90nfTOQg3wiU33lXoADmHZv09tM2WXn3UW dL2Cj3AMUB5MQGufSp/xk1QQImoI0hGC52g9+xHhQcbCDFRz2NboirogMAXWFGoqE6zK tr9Q== X-Forwarded-Encrypted: i=1; AKwUvBxeb1n8WP5j+bikaXP5E+NgjQdiInQFYXHaJVWqkieNyYBee1UKbXRw9JR2APZ+MrCxrCiWWJL9LNg=@lists.infradead.org X-Gm-Message-State: AFq9FYJHI610jOdQZlJJTlDNWL7eKRvCWAHv2ZHJRNLdAeMR+UunX9OW pY3HLxryIc9m0aNvqhlc8acwFtMjGXrpdJHGz9eWhU3+sjUwvPth9SLy X-Gm-Gg: AYBFou1xC5FXiVshmUyVtmS8mR38rimko+qlSwin6Cbp4omWDC8YFG5H7f8h/s9J/WN Xrk+Tz/L+fCp0q8tFJa7N4sc3kgR015eedwRlMFHwJ18P99lnfufFG2WJIQ36Bo4bnwNpQFoz85 yP2tZJVTStJN5KDSOQepzY/AmvDXYMW9s4s+7/1TUabUirDLWcLuJRi1q39Dbr110AK4nuLNVt6 rL0RGWZKdkAnyxb4yxrowQnn2FkawMLGXEkEakY1U/lYTrFxtzRdpHQGOLWBbEGr7DzzV89KQ55 OxFcwnvsWJTOina89AReQeKNwOjF+VIb++SZNKhLatCLFxesxmgobkjrKVDR84kshZV3UaPpScs VI+hZM1wuZOfNCU0ELEj1wM9oso1nrvgRilt7mmtQudwxLKmvbPaxuRy3TVusBwVVxplqDqASVN pNjY/K88yRfUe+QQt7L98qqP3owqe/leU8rVOim129ISgHK+umX4Iaz3VjrITnxCr+yS9ZUO9xj B8GjGwr6l06vlqHsCfVNYsaHaHIkSWVQVBNGcV+NVC+VpGpnkBugUq3OfCp8GY= X-Received: by 2002:a17:90a:d2c8:b0:3a8:185:cf40 with SMTP id 98e67ed59e1d1-3a8a072a966mr3904946a91.10.1791439612496; Wed, 07 Oct 2026 23:06:52 -0700 (PDT) Received: from localhost.localdomain (60-250-196-139.hinet-ip.hinet.net. [60.250.196.139]) by smtp.gmail.com with ESMTPSA id 98e67ed59e1d1-3aa0cbccea3sm2632203a91.15.2026.10.07.23.06.48 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 07 Oct 2026 23:06:52 -0700 (PDT) From: Joey Lu To: Vinod Koul , Neil Armstrong , Manivannan Sadhasivam Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Arnd Bergmann , Catalin Marinas , Jacky Huang , Shan-Chun Hung , Hui-Ping Chen , Joey Lu , linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Joey Lu Subject: [PATCH v7 4/4] phy: nuvoton: phy-ma35d1-usb2: extend to dual-port with OTG support Date: Thu, 8 Oct 2026 14:06:29 +0800 Message-ID: <20261008060629.2736806-5-a0987203069@gmail.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20261008060629.2736806-1-a0987203069@gmail.com> References: <20261008060629.2736806-1-a0987203069@gmail.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.9.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20261007_230653_751491_6D64E142 X-CRM114-Status: GOOD ( 26.37 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org PHY0 and PHY1 use the same power-on/reset sequence in USBPMISCR, with PHY1 control bits shifted 16 positions relative to PHY0. A separate driver for PHY1 would duplicate this logic, so the existing driver is extended to manage both ports. The original driver polled only DEVCKSTB after releasing PHY0 from reset. When USB0 operates in host mode (USB ID pin floating or tied high) only HSTCKSTB and CK12MSTB assert; DEVCKSTB never sets. Polling exclusively for DEVCKSTB in host mode causes a 1 ms timeout on every phy_init() call from the EHCI driver. The init callback is changed to accept either host-mode or device-mode clock stability, whichever asserts first. The power_on and power_off callbacks are replaced by a single init callback that handles PHY reset and clock-stable polling, because there is no PHY-specific clock gate on MA35D1; the PHY analog block derives its reference from the HXT crystal. A read-only USB role switch is registered for PHY0 to expose the USB0 role to userspace via the standard role-switch sysfs interface. The .set callback returns -EOPNOTSUPP because the hardware mux is fully automatic with no software override path. When CONFIG_USB_ROLE_SWITCH is not enabled, the registration returns -ENODEV and the driver skips the role switch gracefully without failing probe. Two new optional device-tree properties are implemented: - nuvoton,rcalcode: writes per-port 4-bit resistor calibration trim codes to the RCALCODE field in USBPMISCR. - nuvoton,oc-active-high: sets the UHOVRCURH bit in MISCFCR0 to treat the over-current detect input as active-high. Signed-off-by: Joey Lu --- drivers/phy/nuvoton/phy-ma35d1-usb2.c | 285 +++++++++++++++++++------- 1 file changed, 211 insertions(+), 74 deletions(-) diff --git a/drivers/phy/nuvoton/phy-ma35d1-usb2.c b/drivers/phy/nuvoton/phy-ma35d1-usb2.c index 0b9976fb15c1..25bd0a7a1314 100644 --- a/drivers/phy/nuvoton/phy-ma35d1-usb2.c +++ b/drivers/phy/nuvoton/phy-ma35d1-usb2.c @@ -1,6 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2024 Nuvoton Technology Corp. + * Nuvoton MA35D1 USB 2.0 PHY driver + * + * Supports PHY0 (USB0 OTG port, shared between DWC2 gadget and EHCI0/OHCI0) + * and PHY1 (USB1 host-only port, used by EHCI1/OHCI1). The hardware mux on + * PHY0 switches automatically via the USB ID pin. + * + * Copyright (C) 2024-2026 Nuvoton Technology Corp. */ #include #include @@ -12,131 +18,262 @@ #include #include #include +#include -/* USB PHY Miscellaneous Control Register */ -#define MA35_SYS_REG_USBPMISCR 0x60 -#define PHY0POR BIT(0) /* PHY Power-On Reset Control Bit */ -#define PHY0SUSPEND BIT(1) /* PHY Suspend; 0: suspend, 1: operaion */ -#define PHY0COMN BIT(2) /* PHY Common Block Power-Down Control */ -#define PHY0DEVCKSTB BIT(10) /* PHY 60 MHz UTMI clock stable bit */ +#define MA35_SYS_PWRONOTP 0x04 +#define PWRONOTP_USBP0ID BIT(16) + +#define MA35_SYS_USBPMISCR 0x60 +#define USBPMISCR_PHY_POR(n) BIT(0 + (n) * 16) +#define USBPMISCR_PHY_SUSPEND(n) BIT(1 + (n) * 16) +#define USBPMISCR_PHY_COMN(n) BIT(2 + (n) * 16) +#define USBPMISCR_PHY_HSTCKSTB(n) BIT(8 + (n) * 16) +#define USBPMISCR_PHY_CK12MSTB(n) BIT(9 + (n) * 16) +#define USBPMISCR_PHY_DEVCKSTB(n) BIT(10 + (n) * 16) +/* Mask for control bits (POR, SUSPEND, COMN) */ +#define USBPMISCR_PHY_CTL_MASK(n) (0x7u << ((n) * 16)) +/* Host-mode ready */ +#define USBPMISCR_PHY_HOST_READY(n) (USBPMISCR_PHY_SUSPEND(n) | \ + USBPMISCR_PHY_HSTCKSTB(n) | \ + USBPMISCR_PHY_CK12MSTB(n)) +/* Device-mode ready */ +#define USBPMISCR_PHY_DEV_READY(n) (USBPMISCR_PHY_SUSPEND(n) | \ + USBPMISCR_PHY_DEVCKSTB(n)) +/* RCALCODE: 4-bit resistor trim */ +#define USBPMISCR_RCAL_SHIFT(n) (12 + (n) * 16) +#define USBPMISCR_RCAL_MASK(n) GENMASK(USBPMISCR_RCAL_SHIFT(n) + 3, \ + USBPMISCR_RCAL_SHIFT(n)) + +#define MA35_SYS_MISCFCR0 0x70 +/* USB host over-current detect polarity (shared, both ports) */ +#define MISCFCR0_UHOVRCURH BIT(12) + +#define MA35_PHY_NUM 2 + +struct ma35_phy_port { + struct phy *phy; + unsigned int idx; +}; struct ma35_usb_phy { - struct clk *clk; struct device *dev; struct regmap *sysreg; + struct ma35_phy_port port[MA35_PHY_NUM]; + struct usb_role_switch *role_sw; }; -static int ma35_usb_phy_power_on(struct phy *phy) +static int ma35_usb_phy_init(struct phy *phy) { - struct ma35_usb_phy *p_phy = phy_get_drvdata(phy); + struct ma35_phy_port *port = phy_get_drvdata(phy); + struct ma35_usb_phy *p = container_of(port - port->idx, + struct ma35_usb_phy, port[0]); + unsigned int n = port->idx; unsigned int val; int ret; - ret = clk_prepare_enable(p_phy->clk); - if (ret < 0) { - dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret); - return ret; + regmap_read(p->sysreg, MA35_SYS_USBPMISCR, &val); + + if (!(val & USBPMISCR_PHY_SUSPEND(n))) { + regmap_update_bits(p->sysreg, MA35_SYS_USBPMISCR, + USBPMISCR_PHY_CTL_MASK(n), + USBPMISCR_PHY_POR(n) | USBPMISCR_PHY_SUSPEND(n)); + udelay(20); + + regmap_update_bits(p->sysreg, MA35_SYS_USBPMISCR, + USBPMISCR_PHY_CTL_MASK(n), + USBPMISCR_PHY_SUSPEND(n)); } - regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val); - if (val & PHY0SUSPEND) { - /* - * USB PHY0 is in operation mode already - * make sure USB PHY 60 MHz UTMI Interface Clock ready - */ - ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val, - val & PHY0DEVCKSTB, 10, 1000); - if (ret == 0) - return 0; + if (n == 0) { + ret = regmap_read_poll_timeout(p->sysreg, MA35_SYS_USBPMISCR, + val, + ((val & USBPMISCR_PHY_HOST_READY(0)) == + USBPMISCR_PHY_HOST_READY(0)) || + ((val & USBPMISCR_PHY_DEV_READY(0)) == + USBPMISCR_PHY_DEV_READY(0)), + 10, 1000); + } else { + ret = regmap_read_poll_timeout(p->sysreg, MA35_SYS_USBPMISCR, + val, + (val & USBPMISCR_PHY_HOST_READY(n)) == + USBPMISCR_PHY_HOST_READY(n), + 10, 1000); } - /* - * reset USB PHY0. - * wait until USB PHY0 60 MHz UTMI Interface Clock ready - */ - regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, (PHY0POR | PHY0SUSPEND)); - udelay(20); - - /* make USB PHY0 enter operation mode */ - regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, PHY0SUSPEND); - - /* make sure USB PHY 60 MHz UTMI Interface Clock ready */ - ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val, - val & PHY0DEVCKSTB, 10, 1000); - if (ret == -ETIMEDOUT) { - dev_err(p_phy->dev, "Check PHY clock, Timeout: %d\n", ret); - clk_disable_unprepare(p_phy->clk); + if (ret) { + dev_err(p->dev, "USB PHY%u clock not stable (USBPMISCR=0x%08x)\n", + n, val); return ret; } return 0; } -static int ma35_usb_phy_power_off(struct phy *phy) +static const struct phy_ops ma35_usb_phy_ops = { + .init = ma35_usb_phy_init, + .owner = THIS_MODULE, +}; + +static int ma35_role_sw_set(struct usb_role_switch *sw, enum usb_role role) { - struct ma35_usb_phy *p_phy = phy_get_drvdata(phy); + return -EOPNOTSUPP; +} + +static enum usb_role ma35_role_sw_get(struct usb_role_switch *sw) +{ + struct ma35_usb_phy *p = usb_role_switch_get_drvdata(sw); + u32 val; + + regmap_read(p->sysreg, MA35_SYS_PWRONOTP, &val); + + return (val & PWRONOTP_USBP0ID) ? USB_ROLE_HOST : USB_ROLE_DEVICE; +} + +static int ma35_role_switch_init(struct platform_device *pdev, + struct ma35_usb_phy *p) +{ + struct usb_role_switch_desc sw_desc = {0}; + + sw_desc.set = ma35_role_sw_set; + sw_desc.get = ma35_role_sw_get; + sw_desc.allow_userspace_control = true; + sw_desc.driver_data = p; + sw_desc.fwnode = dev_fwnode(&pdev->dev); + + p->role_sw = usb_role_switch_register(&pdev->dev, &sw_desc); + if (IS_ERR(p->role_sw)) { + if (PTR_ERR(p->role_sw) == -ENODEV) { + p->role_sw = NULL; + return 0; + } + return dev_err_probe(&pdev->dev, PTR_ERR(p->role_sw), + "failed to register role switch\n"); + } - clk_disable_unprepare(p_phy->clk); return 0; } -static const struct phy_ops ma35_usb_phy_ops = { - .power_on = ma35_usb_phy_power_on, - .power_off = ma35_usb_phy_power_off, - .owner = THIS_MODULE, -}; +static void ma35_role_switch_exit(struct ma35_usb_phy *p) +{ + if (p->role_sw) { + usb_role_switch_unregister(p->role_sw); + p->role_sw = NULL; + } +} + +static struct phy *ma35_usb_phy_xlate(struct device *dev, + const struct of_phandle_args *args) +{ + struct ma35_usb_phy *p = dev_get_drvdata(dev); + unsigned int idx; + + if (args->args_count == 0) + idx = 0; + else + idx = args->args[0]; + + if (idx >= MA35_PHY_NUM) + return ERR_PTR(-EINVAL); + + return p->port[idx].phy; +} static int ma35_usb_phy_probe(struct platform_device *pdev) { struct phy_provider *provider; - struct ma35_usb_phy *p_phy; - struct phy *phy; + struct ma35_usb_phy *p; + struct clk *clk; + int n, ret; + u32 code; - p_phy = devm_kzalloc(&pdev->dev, sizeof(*p_phy), GFP_KERNEL); - if (!p_phy) + p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); + if (!p) return -ENOMEM; - p_phy->dev = &pdev->dev; - platform_set_drvdata(pdev, p_phy); + p->dev = &pdev->dev; + platform_set_drvdata(pdev, p); + + p->sysreg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "nuvoton,sys"); + if (IS_ERR(p->sysreg)) + return dev_err_probe(&pdev->dev, PTR_ERR(p->sysreg), + "failed to get SYS regmap\n"); - p_phy->sysreg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "nuvoton,sys"); - if (IS_ERR(p_phy->sysreg)) - return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->sysreg), - "Failed to get SYS registers\n"); + clk = devm_clk_get_enabled(&pdev->dev, NULL); + if (IS_ERR(clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(clk), + "failed to get clock\n"); - p_phy->clk = of_clk_get(pdev->dev.of_node, 0); - if (IS_ERR(p_phy->clk)) - return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->clk), - "failed to find usb_phy clock\n"); + for (n = 0; n < MA35_PHY_NUM; n++) { + if (of_property_read_u32_index(pdev->dev.of_node, + "nuvoton,rcalcode", n, &code)) + continue; - phy = devm_phy_create(&pdev->dev, NULL, &ma35_usb_phy_ops); - if (IS_ERR(phy)) - return dev_err_probe(&pdev->dev, PTR_ERR(phy), "Failed to create PHY\n"); + if (code > 15) + return dev_err_probe(&pdev->dev, -EINVAL, + "rcalcode[%d] %u out of range (0-15)\n", + n, code); - phy_set_drvdata(phy, p_phy); + regmap_update_bits(p->sysreg, MA35_SYS_USBPMISCR, + USBPMISCR_RCAL_MASK(n), + code << USBPMISCR_RCAL_SHIFT(n)); + } - provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); - if (IS_ERR(provider)) + regmap_update_bits(p->sysreg, MA35_SYS_MISCFCR0, MISCFCR0_UHOVRCURH, + of_property_read_bool(pdev->dev.of_node, + "nuvoton,oc-active-high") ? + MISCFCR0_UHOVRCURH : 0); + + for (n = 0; n < MA35_PHY_NUM; n++) { + p->port[n].idx = n; + + p->port[n].phy = devm_phy_create(&pdev->dev, pdev->dev.of_node, + &ma35_usb_phy_ops); + if (IS_ERR(p->port[n].phy)) + return dev_err_probe(&pdev->dev, PTR_ERR(p->port[n].phy), + "failed to create PHY%d\n", n); + + phy_set_drvdata(p->port[n].phy, &p->port[n]); + } + + ret = ma35_role_switch_init(pdev, p); + if (ret) + return ret; + + provider = devm_of_phy_provider_register(&pdev->dev, ma35_usb_phy_xlate); + if (IS_ERR(provider)) { + ma35_role_switch_exit(p); return dev_err_probe(&pdev->dev, PTR_ERR(provider), - "Failed to register PHY provider\n"); + "failed to register PHY provider\n"); + } + return 0; } +static void ma35_usb_phy_remove(struct platform_device *pdev) +{ + struct ma35_usb_phy *p = platform_get_drvdata(pdev); + + ma35_role_switch_exit(p); +} + static const struct of_device_id ma35_usb_phy_of_match[] = { - { .compatible = "nuvoton,ma35d1-usb2-phy", }, - { }, + { .compatible = "nuvoton,ma35d1-usb2-phy" }, + { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, ma35_usb_phy_of_match); static struct platform_driver ma35_usb_phy_driver = { .probe = ma35_usb_phy_probe, - .driver = { - .name = "ma35d1-usb2-phy", - .of_match_table = ma35_usb_phy_of_match, + .remove = ma35_usb_phy_remove, + .driver = { + .name = "ma35d1-usb2-phy", + .of_match_table = ma35_usb_phy_of_match, }, }; module_platform_driver(ma35_usb_phy_driver); MODULE_DESCRIPTION("Nuvoton ma35d1 USB2.0 PHY driver"); MODULE_AUTHOR("Hui-Ping Chen "); +MODULE_AUTHOR("Joey Lu "); MODULE_LICENSE("GPL"); -- 2.43.0 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy