Linux-PHY Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Vladimir Zapolskiy <vz@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Abel Vesa <abelvesa@kernel.org>,
	Bryan O'Donoghue <bod@kernel.org>, Vinod Koul <vkoul@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
	Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
	Loic Poulain <loic.poulain@oss.qualcomm.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-media@vger.kernel.org,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Manivannan Sadhasivam <mani@kernel.org>,
	linux-phy@lists.infradead.org, Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org,
	Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: [PATCH v2 7/7] arm64: dts: qcom: sm8450: Add description of pins with MCLK function
Date: Tue, 27 Oct 2026 00:49:57 +0200	[thread overview]
Message-ID: <20261026224957.1115370-8-vz@kernel.org> (raw)
In-Reply-To: <20261026224957.1115370-1-vz@kernel.org>

Qualcomm SM8450 SoC provides up to 8 MCLK signals on GPIOs 100 to 107,
add the correspondent default and sleep pin configurations.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Vladimir Zapolskiy <vz@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 112 +++++++++++++++++++++++++++
 1 file changed, 112 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index b4f7672cec94..c8e9af8eb66d 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4292,6 +4292,118 @@ data-pins {
 				};
 			};
 
+			cam0_default: cam0-default-state {
+				pins = "gpio100";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam0_sleep: cam0-sleep-state {
+				pins = "gpio100";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam1_default: cam1-default-state {
+				pins = "gpio101";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam1_sleep: cam1-sleep-state {
+				pins = "gpio101";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam2_default: cam2-default-state {
+				pins = "gpio102";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam2_sleep: cam2-sleep-state {
+				pins = "gpio102";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam3_default: cam3-default-state {
+				pins = "gpio103";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam3_sleep: cam3-sleep-state {
+				pins = "gpio103";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam4_default: cam4-default-state {
+				pins = "gpio104";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam4_sleep: cam4-sleep-state {
+				pins = "gpio104";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam5_default: cam5-default-state {
+				pins = "gpio105";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam5_sleep: cam5-sleep-state {
+				pins = "gpio105";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam6_default: cam6-default-state {
+				pins = "gpio106";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam6_sleep: cam6-sleep-state {
+				pins = "gpio106";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cam7_default: cam7-default-state {
+				pins = "gpio107";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam7_sleep: cam7-sleep-state {
+				pins = "gpio107";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			cci0_default: cci0-default-state {
 				/* SDA, SCL */
 				pins = "gpio110", "gpio111";
-- 
2.51.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2026-10-26 22:50 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-26 22:49 [PATCH v2 0/7] media: qcom: camss: Add SM8450 CAMSS support Vladimir Zapolskiy
2026-10-26 22:49 ` [PATCH v2 1/7] dt-bindings: phy: qcom,x1e80100-csi2-phy: Add SM8450 compatible Vladimir Zapolskiy
2026-10-28 12:09   ` Krzysztof Kozlowski
2026-10-26 22:49 ` [PATCH v2 2/7] dt-bindings: media: Add Qualcomm SM8450 CAMSS Vladimir Zapolskiy
2026-10-28 12:16   ` Krzysztof Kozlowski
2026-10-26 22:49 ` [PATCH v2 3/7] media: qcom: camss: Allow CSI2 PHY devices without CSIPHY resources Vladimir Zapolskiy
2026-10-27 10:52   ` Loic Poulain
2026-10-27 17:00     ` Vladimir Zapolskiy
2026-10-28 14:43   ` Loic Poulain
2026-10-28 15:22   ` Frank Li
2026-10-26 22:49 ` [PATCH v2 4/7] media: qcom: camss: Add SM8450 CAMSS support Vladimir Zapolskiy
2026-10-28 15:31   ` Frank Li
2026-10-26 22:49 ` [PATCH v2 5/7] arm64: dts: qcom: sm8450: Add CSI2 PHY device tree nodes Vladimir Zapolskiy
2026-10-27 11:11   ` Abel Vesa
2026-10-26 22:49 ` [PATCH v2 6/7] arm64: dts: qcom: sm8450: Add CAMSS device tree node Vladimir Zapolskiy
2026-10-27 11:11   ` Abel Vesa
2026-10-26 22:49 ` Vladimir Zapolskiy [this message]
2026-10-27 11:12   ` [PATCH v2 7/7] arm64: dts: qcom: sm8450: Add description of pins with MCLK function Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261026224957.1115370-8-vz@kernel.org \
    --to=vz@kernel.org \
    --cc=abelvesa@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bod@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@oss.qualcomm.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=loic.poulain@oss.qualcomm.com \
    --cc=mani@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    --cc=vladimir.zapolskiy@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox