From: neil.armstrong@linaro.org
To: "Peter Griffin" <peter.griffin@linaro.org>,
"Vinod Koul" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"André Draszik" <andre.draszik@linaro.org>,
"Tudor Ambarus" <tudor.ambarus@linaro.org>,
"Alim Akhtar" <alim.akhtar@samsung.com>,
"Krzysztof Kozlowski" <krzk@kernel.org>
Cc: linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, kernel-team@android.com,
William Mcvicker <willmcvicker@google.com>,
Manivannan Sadhasivam <mani@kernel.org>
Subject: Re: [PATCH v5 2/2] phy: samsung: gs101-ufs: Add .notify_phystate() & hibern8 enter/exit values
Date: Tue, 18 Nov 2025 10:14:10 +0100 [thread overview]
Message-ID: <254ec2db-bfe2-43aa-8bd5-a45ec89a7d0b@linaro.org> (raw)
In-Reply-To: <20251112-phy-notify-pmstate-v5-2-39df622d8fcb@linaro.org>
On 11/12/25 17:27, Peter Griffin wrote:
> Implement the .notify_phystate() callback and provide the gs101 specific
> phy values that need to be programmed when entering and exiting the hibern8
> state.
>
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> ---
> Changes in v4
> - Resolve Intel 0-day warning
> ---
> drivers/phy/samsung/phy-gs101-ufs.c | 28 ++++++++++++++++++++++++
> drivers/phy/samsung/phy-samsung-ufs.c | 40 +++++++++++++++++++++++++++++++++++
> drivers/phy/samsung/phy-samsung-ufs.h | 7 ++++++
> 3 files changed, 75 insertions(+)
>
> diff --git a/drivers/phy/samsung/phy-gs101-ufs.c b/drivers/phy/samsung/phy-gs101-ufs.c
> index 17b798da5b5761f8e367599517d2d97bf0bb6b74..a15e1f453f7f3cecd6d3aa75217633ac4b6085d0 100644
> --- a/drivers/phy/samsung/phy-gs101-ufs.c
> +++ b/drivers/phy/samsung/phy-gs101-ufs.c
> @@ -108,12 +108,39 @@ static const struct samsung_ufs_phy_cfg tensor_gs101_post_pwr_hs_config[] = {
> END_UFS_PHY_CFG,
> };
>
> +static const struct samsung_ufs_phy_cfg tensor_gs101_post_h8_enter[] = {
> + PHY_TRSV_REG_CFG_GS101(0x262, 0x08, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG_GS101(0x265, 0x0A, PWR_MODE_ANY),
> + PHY_COMN_REG_CFG(0x1, 0x8, PWR_MODE_ANY),
> + PHY_COMN_REG_CFG(0x0, 0x86, PWR_MODE_ANY),
> + PHY_COMN_REG_CFG(0x8, 0x60, PWR_MODE_HS_ANY),
> + PHY_TRSV_REG_CFG_GS101(0x222, 0x08, PWR_MODE_HS_ANY),
> + PHY_TRSV_REG_CFG_GS101(0x246, 0x01, PWR_MODE_HS_ANY),
> + END_UFS_PHY_CFG,
> +};
> +
> +static const struct samsung_ufs_phy_cfg tensor_gs101_pre_h8_exit[] = {
> + PHY_COMN_REG_CFG(0x0, 0xC6, PWR_MODE_ANY),
> + PHY_COMN_REG_CFG(0x1, 0x0C, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG_GS101(0x262, 0x00, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG_GS101(0x265, 0x00, PWR_MODE_ANY),
> + PHY_COMN_REG_CFG(0x8, 0xE0, PWR_MODE_HS_ANY),
> + PHY_TRSV_REG_CFG_GS101(0x246, 0x03, PWR_MODE_HS_ANY),
> + PHY_TRSV_REG_CFG_GS101(0x222, 0x18, PWR_MODE_HS_ANY),
> + END_UFS_PHY_CFG,
> +};
> +
> static const struct samsung_ufs_phy_cfg *tensor_gs101_ufs_phy_cfgs[CFG_TAG_MAX] = {
> [CFG_PRE_INIT] = tensor_gs101_pre_init_cfg,
> [CFG_PRE_PWR_HS] = tensor_gs101_pre_pwr_hs_config,
> [CFG_POST_PWR_HS] = tensor_gs101_post_pwr_hs_config,
> };
>
> +static const struct samsung_ufs_phy_cfg *tensor_gs101_hibern8_cfgs[] = {
> + [CFG_POST_HIBERN8_ENTER] = tensor_gs101_post_h8_enter,
> + [CFG_PRE_HIBERN8_EXIT] = tensor_gs101_pre_h8_exit,
> +};
> +
> static const char * const tensor_gs101_ufs_phy_clks[] = {
> "ref_clk",
> };
> @@ -170,6 +197,7 @@ static int gs101_phy_wait_for_cdr_lock(struct phy *phy, u8 lane)
>
> const struct samsung_ufs_phy_drvdata tensor_gs101_ufs_phy = {
> .cfgs = tensor_gs101_ufs_phy_cfgs,
> + .cfgs_hibern8 = tensor_gs101_hibern8_cfgs,
> .isol = {
> .offset = TENSOR_GS101_PHY_CTRL,
> .mask = TENSOR_GS101_PHY_CTRL_MASK,
> diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
> index f3cbe6b17b235bb181b3fae628d75822f0c9183a..ee665f26c2361ff9c3933b10ac713bbd9085b459 100644
> --- a/drivers/phy/samsung/phy-samsung-ufs.c
> +++ b/drivers/phy/samsung/phy-samsung-ufs.c
> @@ -217,6 +217,44 @@ static int samsung_ufs_phy_set_mode(struct phy *generic_phy,
> return 0;
> }
>
> +static int samsung_ufs_phy_notify_state(struct phy *phy,
> + union phy_notify state)
> +{
> + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
> + const struct samsung_ufs_phy_cfg *cfg;
> + int i, err = -EINVAL;
> +
> + if (!ufs_phy->cfgs_hibern8)
> + return 0;
> +
> + if (state.ufs_state == PHY_UFS_HIBERN8_ENTER)
> + cfg = ufs_phy->cfgs_hibern8[CFG_POST_HIBERN8_ENTER];
> + else if (state.ufs_state == PHY_UFS_HIBERN8_EXIT)
> + cfg = ufs_phy->cfgs_hibern8[CFG_PRE_HIBERN8_EXIT];
> + else
> + goto err_out;
> +
> + for_each_phy_cfg(cfg) {
> + for_each_phy_lane(ufs_phy, i) {
> + samsung_ufs_phy_config(ufs_phy, cfg, i);
> + }
> + }
> +
> + if (state.ufs_state == PHY_UFS_HIBERN8_EXIT) {
> + for_each_phy_lane(ufs_phy, i) {
> + if (ufs_phy->drvdata->wait_for_cdr) {
> + err = ufs_phy->drvdata->wait_for_cdr(phy, i);
> + if (err)
> + goto err_out;
> + }
> + }
> + }
> +
> + return 0;
> +err_out:
> + return err;
> +}
> +
> static int samsung_ufs_phy_exit(struct phy *phy)
> {
> struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
> @@ -233,6 +271,7 @@ static const struct phy_ops samsung_ufs_phy_ops = {
> .power_off = samsung_ufs_phy_power_off,
> .calibrate = samsung_ufs_phy_calibrate,
> .set_mode = samsung_ufs_phy_set_mode,
> + .notify_phystate = samsung_ufs_phy_notify_state,
> .owner = THIS_MODULE,
> };
>
> @@ -287,6 +326,7 @@ static int samsung_ufs_phy_probe(struct platform_device *pdev)
> phy->dev = dev;
> phy->drvdata = drvdata;
> phy->cfgs = drvdata->cfgs;
> + phy->cfgs_hibern8 = drvdata->cfgs_hibern8;
> memcpy(&phy->isol, &drvdata->isol, sizeof(phy->isol));
>
> if (!of_property_read_u32_index(dev->of_node, "samsung,pmu-syscon", 1,
> diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h
> index a28f148081d168344b47f2798b00cb098f0a8574..f2c2e744e5bae87c9cfcaa17f4a09456f134966a 100644
> --- a/drivers/phy/samsung/phy-samsung-ufs.h
> +++ b/drivers/phy/samsung/phy-samsung-ufs.h
> @@ -92,6 +92,11 @@ enum {
> CFG_TAG_MAX,
> };
>
> +enum {
> + CFG_POST_HIBERN8_ENTER,
> + CFG_PRE_HIBERN8_EXIT,
> +};
> +
> struct samsung_ufs_phy_cfg {
> u32 off_0;
> u32 off_1;
> @@ -108,6 +113,7 @@ struct samsung_ufs_phy_pmu_isol {
>
> struct samsung_ufs_phy_drvdata {
> const struct samsung_ufs_phy_cfg **cfgs;
> + const struct samsung_ufs_phy_cfg **cfgs_hibern8;
> struct samsung_ufs_phy_pmu_isol isol;
> const char * const *clk_list;
> int num_clks;
> @@ -124,6 +130,7 @@ struct samsung_ufs_phy {
> struct clk_bulk_data *clks;
> const struct samsung_ufs_phy_drvdata *drvdata;
> const struct samsung_ufs_phy_cfg * const *cfgs;
> + const struct samsung_ufs_phy_cfg * const *cfgs_hibern8;
> struct samsung_ufs_phy_pmu_isol isol;
> u8 lane_cnt;
> int ufs_phy_state;
>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2025-11-18 9:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-12 16:27 [PATCH v5 0/2] Add new phy_notify_state() api Peter Griffin
2025-11-12 16:27 ` [PATCH v5 1/2] phy: add " Peter Griffin
2025-11-18 9:13 ` neil.armstrong
2025-11-12 16:27 ` [PATCH v5 2/2] phy: samsung: gs101-ufs: Add .notify_phystate() & hibern8 enter/exit values Peter Griffin
2025-11-18 9:14 ` neil.armstrong [this message]
2025-11-18 17:18 ` [PATCH v5 0/2] Add new phy_notify_state() api Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=254ec2db-bfe2-43aa-8bd5-a45ec89a7d0b@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=alim.akhtar@samsung.com \
--cc=andre.draszik@linaro.org \
--cc=kernel-team@android.com \
--cc=kishon@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mani@kernel.org \
--cc=peter.griffin@linaro.org \
--cc=tudor.ambarus@linaro.org \
--cc=vkoul@kernel.org \
--cc=willmcvicker@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).