* [PATCH 1/2] dt-bindings: phy: rockchip: add rk3576 compatible
@ 2024-10-15 1:33 Frank Wang
2024-10-15 1:33 ` [PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576 Frank Wang
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Frank Wang @ 2024-10-15 1:33 UTC (permalink / raw)
To: vkoul, kishon, robh, krzk+dt, conor+dt, heiko
Cc: linux-phy, devicetree, linux-arm-kernel, linux-kernel,
linux-rockchip, william.wu, tim.chen, Frank Wang
From: Frank Wang <frank.wang@rock-chips.com>
Adds the compatible line to support RK3576 SoC.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
---
.../devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
index d3cd7997879f..1b3de6678c08 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -13,6 +13,7 @@ properties:
compatible:
enum:
- rockchip,rk3568-naneng-combphy
+ - rockchip,rk3576-naneng-combphy
- rockchip,rk3588-naneng-combphy
reg:
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576 2024-10-15 1:33 [PATCH 1/2] dt-bindings: phy: rockchip: add rk3576 compatible Frank Wang @ 2024-10-15 1:33 ` Frank Wang 2024-10-15 6:15 ` Heiko Stübner 2024-10-15 6:06 ` [PATCH 1/2] dt-bindings: phy: rockchip: add rk3576 compatible Heiko Stübner 2024-10-15 20:20 ` Rob Herring (Arm) 2 siblings, 1 reply; 9+ messages in thread From: Frank Wang @ 2024-10-15 1:33 UTC (permalink / raw) To: vkoul, kishon, robh, krzk+dt, conor+dt, heiko Cc: linux-phy, devicetree, linux-arm-kernel, linux-kernel, linux-rockchip, william.wu, tim.chen, Kever Yang, Frank Wang From: Kever Yang <kever.yang@rock-chips.com> phy0: pcie, sata phy1: pcie, sata, usb3 Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: William Wu <william.wu@rock-chips.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> --- .../rockchip/phy-rockchip-naneng-combphy.c | 202 ++++++++++++++++++ 1 file changed, 202 insertions(+) diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c index 0a9989e41237..4c41317a8041 100644 --- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c @@ -98,6 +98,7 @@ struct rockchip_combphy_grfcfg { struct combphy_reg pipe_rxterm_set; struct combphy_reg pipe_txelec_set; struct combphy_reg pipe_txcomp_set; + struct combphy_reg pipe_clk_24m; struct combphy_reg pipe_clk_25m; struct combphy_reg pipe_clk_100m; struct combphy_reg pipe_phymode_sel; @@ -584,6 +585,203 @@ static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = { .combphy_cfg = rk3568_combphy_cfg, }; +static int rk3576_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + unsigned long rate; + + switch (priv->type) { + case PHY_TYPE_PCIE: + /* Set SSC downward spread spectrum */ + rockchip_combphy_updatel(priv, GENMASK(5, 4), BIT(4), 0x7c); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); + break; + case PHY_TYPE_USB3: + /* Set SSC downward spread spectrum */ + rockchip_combphy_updatel(priv, GENMASK(5, 4), BIT(4), 0x7c); + + /* Enable adaptive CTLE for USB3.0 Rx */ + rockchip_combphy_updatel(priv, GENMASK(0, 0), BIT(0), 0x38); + + /* Set PLL KVCO fine tuning signals */ + rockchip_combphy_updatel(priv, GENMASK(4, 2), BIT(3), 0x80); + + /* Set PLL LPF R1 to su_trim[10:7]=1001 */ + writel(0x4, priv->mmio + (0xb << 2)); + + /* Set PLL input clock divider 1/2 */ + rockchip_combphy_updatel(priv, GENMASK(7, 6), BIT(6), 0x14); + + /* Set PLL loop divider */ + writel(0x32, priv->mmio + (0x11 << 2)); + + /* Set PLL KVCO to min and set PLL charge pump current to max */ + writel(0xf0, priv->mmio + (0xa << 2)); + + /* Set Rx squelch input filler bandwidth */ + writel(0x0d, priv->mmio + (0x14 << 2)); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); + break; + case PHY_TYPE_SATA: + /* Enable adaptive CTLE for SATA Rx */ + rockchip_combphy_updatel(priv, GENMASK(0, 0), BIT(0), 0x38); + + /* Set tx_rterm = 50 ohm and rx_rterm = 43.5 ohm */ + writel(0x8F, priv->mmio + (0x06 << 2)); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true); + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true); + break; + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + rate = clk_get_rate(priv->refclk); + + switch (rate) { + case REF_CLOCK_24MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_24m, true); + if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) { + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz */ + rockchip_combphy_updatel(priv, GENMASK(7, 6), BIT(6), 0xe << 2); + + rockchip_combphy_updatel(priv, GENMASK(7, 0), 0x5f, 0xf << 2); + } else if (priv->type == PHY_TYPE_PCIE) { + /* PLL KVCO tuning fine */ + rockchip_combphy_updatel(priv, GENMASK(4, 2), 0x4 << 2, 0x20 << 2); + + /* Set up rx_trim */ + writel(0x0, priv->mmio + (0x1b << 2)); + + /* Set up su_trim: T0_1 */ + writel(0x90, priv->mmio + (0xa << 2)); + writel(0x02, priv->mmio + (0xb << 2)); + writel(0x57, priv->mmio + (0xd << 2)); + + writel(0x5f, priv->mmio + (0xf << 2)); + } + break; + case REF_CLOCK_25MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); + break; + case REF_CLOCK_100MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); + if (priv->type == PHY_TYPE_PCIE) { + /* gate_tx_pck_sel length select work for L1SS */ + writel(0xc0, priv->mmio + 0x74); + + /* PLL KVCO tuning fine */ + rockchip_combphy_updatel(priv, GENMASK(4, 2), 0x4 << 2, 0x20 << 2); + + /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */ + writel(0x4c, priv->mmio + (0x1b << 2)); + + /* Set up su_trim: T3_P1 650mv */ + writel(0x90, priv->mmio + (0xa << 2)); + writel(0x43, priv->mmio + (0xb << 2)); + writel(0x88, priv->mmio + (0xc << 2)); + writel(0x56, priv->mmio + (0xd << 2)); + } else if (priv->type == PHY_TYPE_SATA) { + /* downward spread spectrum +500ppm */ + rockchip_combphy_updatel(priv, GENMASK(7, 4), 0x50, 0x1f << 2); + + /* ssc ppm adjust to 3500ppm */ + rockchip_combphy_updatel(priv, GENMASK(3, 0), 0x7, 0x9 << 2); + } + break; + default: + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); + return -EINVAL; + } + + if (priv->ext_refclk) { + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { + writel(0x10, priv->mmio + (0x20 << 2)); + + writel(0x0c, priv->mmio + (0x1b << 2)); + + /* Set up su_trim: T3_P1 650mv */ + writel(0x90, priv->mmio + (0xa << 2)); + writel(0x43, priv->mmio + (0xb << 2)); + writel(0x88, priv->mmio + (0xc << 2)); + writel(0x56, priv->mmio + (0xd << 2)); + } + } + + if (priv->enable_ssc) { + rockchip_combphy_updatel(priv, GENMASK(4, 4), BIT(4), 0x7 << 2); + + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_24MHz) { + /* Xin24M T0_1 650mV */ + writel(0x00, priv->mmio + (0x10 << 2)); + writel(0x32, priv->mmio + (0x11 << 2)); + writel(0x00, priv->mmio + (0x1b << 2)); + writel(0x90, priv->mmio + (0x0a << 2)); + writel(0x02, priv->mmio + (0x0b << 2)); + writel(0x08, priv->mmio + (0x0c << 2)); + writel(0x57, priv->mmio + (0x0d << 2)); + writel(0x40, priv->mmio + (0x0e << 2)); + writel(0x5f, priv->mmio + (0x0f << 2)); + writel(0x10, priv->mmio + (0x20 << 2)); + } + } + + return 0; +} + +static const struct rockchip_combphy_grfcfg rk3576_combphy_grfcfgs = { + /* pipe-phy-grf */ + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, + .pipe_clk_24m = { 0x0004, 14, 13, 0x00, 0x00 }, + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, + .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 }, + .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 }, + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, + .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0129 }, + .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c1 }, + .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x0407 }, + /* php-grf */ + .pipe_con0_for_sata = { 0x001C, 2, 0, 0x00, 0x2 }, + .pipe_con1_for_sata = { 0x0020, 2, 0, 0x00, 0x2 }, +}; + +static const struct rockchip_combphy_cfg rk3576_combphy_cfgs = { + .num_phys = 2, + .phy_ids = { + 0x2b050000, + 0x2b060000 + }, + .grfcfg = &rk3576_combphy_grfcfgs, + .combphy_cfg = rk3576_combphy_cfg, +}; + static int rk3588_combphy_cfg(struct rockchip_combphy_priv *priv) { const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; @@ -775,6 +973,10 @@ static const struct of_device_id rockchip_combphy_of_match[] = { .compatible = "rockchip,rk3568-naneng-combphy", .data = &rk3568_combphy_cfgs, }, + { + .compatible = "rockchip,rk3576-naneng-combphy", + .data = &rk3576_combphy_cfgs, + }, { .compatible = "rockchip,rk3588-naneng-combphy", .data = &rk3588_combphy_cfgs, -- 2.34.1 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576 2024-10-15 1:33 ` [PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576 Frank Wang @ 2024-10-15 6:15 ` Heiko Stübner 2024-10-15 6:58 ` Frank Wang 2024-10-15 8:39 ` Shawn Lin 0 siblings, 2 replies; 9+ messages in thread From: Heiko Stübner @ 2024-10-15 6:15 UTC (permalink / raw) To: vkoul, kishon, robh, krzk+dt, conor+dt, Frank Wang Cc: linux-phy, devicetree, linux-arm-kernel, linux-kernel, linux-rockchip, william.wu, tim.chen, Kever Yang, Frank Wang Hi Frank, Am Dienstag, 15. Oktober 2024, 03:33:51 CEST schrieb Frank Wang: > From: Kever Yang <kever.yang@rock-chips.com> > > phy0: pcie, sata > phy1: pcie, sata, usb3 > > Signed-off-by: Kever Yang <kever.yang@rock-chips.com> > Signed-off-by: William Wu <william.wu@rock-chips.com> > Signed-off-by: Frank Wang <frank.wang@rock-chips.com> > --- > .../rockchip/phy-rockchip-naneng-combphy.c | 202 ++++++++++++++++++ > 1 file changed, 202 insertions(+) > > diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c > index 0a9989e41237..4c41317a8041 100644 > --- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c > +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c > @@ -584,6 +585,203 @@ static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = { > .combphy_cfg = rk3568_combphy_cfg, > }; > > +static int rk3576_combphy_cfg(struct rockchip_combphy_priv *priv) > +{ > + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; > + unsigned long rate; > + > + switch (priv->type) { > + case PHY_TYPE_PCIE: > + /* Set SSC downward spread spectrum */ > + rockchip_combphy_updatel(priv, GENMASK(5, 4), BIT(4), 0x7c); Can we get constants for those magic values please? The combophys for rk3568 and rk3588 do use actual constants to at least somewhat describe what happens, so it would be really nice for the rk3576 to do this as well. Same for the rockchip_combphy_updatel and other writel calls below. > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); > + break; > + case PHY_TYPE_USB3: > + /* Set SSC downward spread spectrum */ > + rockchip_combphy_updatel(priv, GENMASK(5, 4), BIT(4), 0x7c); > + > + /* Enable adaptive CTLE for USB3.0 Rx */ > + rockchip_combphy_updatel(priv, GENMASK(0, 0), BIT(0), 0x38); > + > + /* Set PLL KVCO fine tuning signals */ > + rockchip_combphy_updatel(priv, GENMASK(4, 2), BIT(3), 0x80); > + > + /* Set PLL LPF R1 to su_trim[10:7]=1001 */ > + writel(0x4, priv->mmio + (0xb << 2)); > + > + /* Set PLL input clock divider 1/2 */ > + rockchip_combphy_updatel(priv, GENMASK(7, 6), BIT(6), 0x14); > + > + /* Set PLL loop divider */ > + writel(0x32, priv->mmio + (0x11 << 2)); > + > + /* Set PLL KVCO to min and set PLL charge pump current to max */ > + writel(0xf0, priv->mmio + (0xa << 2)); > + > + /* Set Rx squelch input filler bandwidth */ > + writel(0x0d, priv->mmio + (0x14 << 2)); > + > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); > + break; > + case PHY_TYPE_SATA: > + /* Enable adaptive CTLE for SATA Rx */ > + rockchip_combphy_updatel(priv, GENMASK(0, 0), BIT(0), 0x38); > + > + /* Set tx_rterm = 50 ohm and rx_rterm = 43.5 ohm */ > + writel(0x8F, priv->mmio + (0x06 << 2)); > + > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true); > + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); > + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true); > + break; > + default: > + dev_err(priv->dev, "incompatible PHY type\n"); > + return -EINVAL; > + } > + > + rate = clk_get_rate(priv->refclk); > + > + switch (rate) { > + case REF_CLOCK_24MHz: > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_24m, true); > + if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) { > + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz */ > + rockchip_combphy_updatel(priv, GENMASK(7, 6), BIT(6), 0xe << 2); > + > + rockchip_combphy_updatel(priv, GENMASK(7, 0), 0x5f, 0xf << 2); > + } else if (priv->type == PHY_TYPE_PCIE) { > + /* PLL KVCO tuning fine */ > + rockchip_combphy_updatel(priv, GENMASK(4, 2), 0x4 << 2, 0x20 << 2); > + > + /* Set up rx_trim */ > + writel(0x0, priv->mmio + (0x1b << 2)); > + > + /* Set up su_trim: T0_1 */ > + writel(0x90, priv->mmio + (0xa << 2)); > + writel(0x02, priv->mmio + (0xb << 2)); > + writel(0x57, priv->mmio + (0xd << 2)); > + > + writel(0x5f, priv->mmio + (0xf << 2)); This does includes both the value as well as the register addresses, because a hex-value with a bit shift makes that even less readable. Thanks a lot Heiko > + } > + break; > + case REF_CLOCK_25MHz: > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); > + break; > + case REF_CLOCK_100MHz: > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); > + if (priv->type == PHY_TYPE_PCIE) { > + /* gate_tx_pck_sel length select work for L1SS */ > + writel(0xc0, priv->mmio + 0x74); > + > + /* PLL KVCO tuning fine */ > + rockchip_combphy_updatel(priv, GENMASK(4, 2), 0x4 << 2, 0x20 << 2); > + > + /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */ > + writel(0x4c, priv->mmio + (0x1b << 2)); > + > + /* Set up su_trim: T3_P1 650mv */ > + writel(0x90, priv->mmio + (0xa << 2)); > + writel(0x43, priv->mmio + (0xb << 2)); > + writel(0x88, priv->mmio + (0xc << 2)); > + writel(0x56, priv->mmio + (0xd << 2)); > + } else if (priv->type == PHY_TYPE_SATA) { > + /* downward spread spectrum +500ppm */ > + rockchip_combphy_updatel(priv, GENMASK(7, 4), 0x50, 0x1f << 2); > + > + /* ssc ppm adjust to 3500ppm */ > + rockchip_combphy_updatel(priv, GENMASK(3, 0), 0x7, 0x9 << 2); > + } > + break; > + default: > + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); > + return -EINVAL; > + } > + > + if (priv->ext_refclk) { > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); > + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { > + writel(0x10, priv->mmio + (0x20 << 2)); > + > + writel(0x0c, priv->mmio + (0x1b << 2)); > + > + /* Set up su_trim: T3_P1 650mv */ > + writel(0x90, priv->mmio + (0xa << 2)); > + writel(0x43, priv->mmio + (0xb << 2)); > + writel(0x88, priv->mmio + (0xc << 2)); > + writel(0x56, priv->mmio + (0xd << 2)); > + } > + } > + > + if (priv->enable_ssc) { > + rockchip_combphy_updatel(priv, GENMASK(4, 4), BIT(4), 0x7 << 2); > + > + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_24MHz) { > + /* Xin24M T0_1 650mV */ > + writel(0x00, priv->mmio + (0x10 << 2)); > + writel(0x32, priv->mmio + (0x11 << 2)); > + writel(0x00, priv->mmio + (0x1b << 2)); > + writel(0x90, priv->mmio + (0x0a << 2)); > + writel(0x02, priv->mmio + (0x0b << 2)); > + writel(0x08, priv->mmio + (0x0c << 2)); > + writel(0x57, priv->mmio + (0x0d << 2)); > + writel(0x40, priv->mmio + (0x0e << 2)); > + writel(0x5f, priv->mmio + (0x0f << 2)); > + writel(0x10, priv->mmio + (0x20 << 2)); > + } > + } > + > + return 0; > +} -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576 2024-10-15 6:15 ` Heiko Stübner @ 2024-10-15 6:58 ` Frank Wang 2024-10-15 8:39 ` Shawn Lin 1 sibling, 0 replies; 9+ messages in thread From: Frank Wang @ 2024-10-15 6:58 UTC (permalink / raw) To: Heiko Stübner, vkoul, kishon, robh, krzk+dt, conor+dt Cc: linux-phy, devicetree, linux-arm-kernel, linux-kernel, linux-rockchip, william.wu, tim.chen, Kever Yang, Frank Wang Hi Heiko, On 2024/10/15 14:15, Heiko Stübner wrote: > Hi Frank, > > Am Dienstag, 15. Oktober 2024, 03:33:51 CEST schrieb Frank Wang: >> From: Kever Yang <kever.yang@rock-chips.com> >> >> phy0: pcie, sata >> phy1: pcie, sata, usb3 >> >> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> >> Signed-off-by: William Wu <william.wu@rock-chips.com> >> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> >> --- >> .../rockchip/phy-rockchip-naneng-combphy.c | 202 ++++++++++++++++++ >> 1 file changed, 202 insertions(+) >> >> diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c >> index 0a9989e41237..4c41317a8041 100644 >> --- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c >> +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c >> @@ -584,6 +585,203 @@ static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = { >> .combphy_cfg = rk3568_combphy_cfg, >> }; >> >> +static int rk3576_combphy_cfg(struct rockchip_combphy_priv *priv) >> +{ >> + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; >> + unsigned long rate; >> + >> + switch (priv->type) { >> + case PHY_TYPE_PCIE: >> + /* Set SSC downward spread spectrum */ >> + rockchip_combphy_updatel(priv, GENMASK(5, 4), BIT(4), 0x7c); > Can we get constants for those magic values please? Ah of cause, I will amend them and send a new patch. Best regards, Frank > The combophys for rk3568 and rk3588 do use actual constants to at least > somewhat describe what happens, so it would be really nice for the rk3576 > to do this as well. > > Same for the rockchip_combphy_updatel and other writel calls below. > > >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); >> + break; >> + case PHY_TYPE_USB3: >> + /* Set SSC downward spread spectrum */ >> + rockchip_combphy_updatel(priv, GENMASK(5, 4), BIT(4), 0x7c); >> + >> + /* Enable adaptive CTLE for USB3.0 Rx */ >> + rockchip_combphy_updatel(priv, GENMASK(0, 0), BIT(0), 0x38); >> + >> + /* Set PLL KVCO fine tuning signals */ >> + rockchip_combphy_updatel(priv, GENMASK(4, 2), BIT(3), 0x80); >> + >> + /* Set PLL LPF R1 to su_trim[10:7]=1001 */ >> + writel(0x4, priv->mmio + (0xb << 2)); >> + >> + /* Set PLL input clock divider 1/2 */ >> + rockchip_combphy_updatel(priv, GENMASK(7, 6), BIT(6), 0x14); >> + >> + /* Set PLL loop divider */ >> + writel(0x32, priv->mmio + (0x11 << 2)); >> + >> + /* Set PLL KVCO to min and set PLL charge pump current to max */ >> + writel(0xf0, priv->mmio + (0xa << 2)); >> + >> + /* Set Rx squelch input filler bandwidth */ >> + writel(0x0d, priv->mmio + (0x14 << 2)); >> + >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); >> + break; >> + case PHY_TYPE_SATA: >> + /* Enable adaptive CTLE for SATA Rx */ >> + rockchip_combphy_updatel(priv, GENMASK(0, 0), BIT(0), 0x38); >> + >> + /* Set tx_rterm = 50 ohm and rx_rterm = 43.5 ohm */ >> + writel(0x8F, priv->mmio + (0x06 << 2)); >> + >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true); >> + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); >> + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true); >> + break; >> + default: >> + dev_err(priv->dev, "incompatible PHY type\n"); >> + return -EINVAL; >> + } >> + >> + rate = clk_get_rate(priv->refclk); >> + >> + switch (rate) { >> + case REF_CLOCK_24MHz: >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_24m, true); >> + if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) { >> + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz */ >> + rockchip_combphy_updatel(priv, GENMASK(7, 6), BIT(6), 0xe << 2); >> + >> + rockchip_combphy_updatel(priv, GENMASK(7, 0), 0x5f, 0xf << 2); >> + } else if (priv->type == PHY_TYPE_PCIE) { >> + /* PLL KVCO tuning fine */ >> + rockchip_combphy_updatel(priv, GENMASK(4, 2), 0x4 << 2, 0x20 << 2); >> + >> + /* Set up rx_trim */ >> + writel(0x0, priv->mmio + (0x1b << 2)); >> + >> + /* Set up su_trim: T0_1 */ >> + writel(0x90, priv->mmio + (0xa << 2)); >> + writel(0x02, priv->mmio + (0xb << 2)); >> + writel(0x57, priv->mmio + (0xd << 2)); >> + >> + writel(0x5f, priv->mmio + (0xf << 2)); > This does includes both the value as well as the register addresses, > because a hex-value with a bit shift makes that even less readable. > > Thanks a lot > Heiko > > >> + } >> + break; >> + case REF_CLOCK_25MHz: >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); >> + break; >> + case REF_CLOCK_100MHz: >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); >> + if (priv->type == PHY_TYPE_PCIE) { >> + /* gate_tx_pck_sel length select work for L1SS */ >> + writel(0xc0, priv->mmio + 0x74); >> + >> + /* PLL KVCO tuning fine */ >> + rockchip_combphy_updatel(priv, GENMASK(4, 2), 0x4 << 2, 0x20 << 2); >> + >> + /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */ >> + writel(0x4c, priv->mmio + (0x1b << 2)); >> + >> + /* Set up su_trim: T3_P1 650mv */ >> + writel(0x90, priv->mmio + (0xa << 2)); >> + writel(0x43, priv->mmio + (0xb << 2)); >> + writel(0x88, priv->mmio + (0xc << 2)); >> + writel(0x56, priv->mmio + (0xd << 2)); >> + } else if (priv->type == PHY_TYPE_SATA) { >> + /* downward spread spectrum +500ppm */ >> + rockchip_combphy_updatel(priv, GENMASK(7, 4), 0x50, 0x1f << 2); >> + >> + /* ssc ppm adjust to 3500ppm */ >> + rockchip_combphy_updatel(priv, GENMASK(3, 0), 0x7, 0x9 << 2); >> + } >> + break; >> + default: >> + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); >> + return -EINVAL; >> + } >> + >> + if (priv->ext_refclk) { >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); >> + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { >> + writel(0x10, priv->mmio + (0x20 << 2)); >> + >> + writel(0x0c, priv->mmio + (0x1b << 2)); >> + >> + /* Set up su_trim: T3_P1 650mv */ >> + writel(0x90, priv->mmio + (0xa << 2)); >> + writel(0x43, priv->mmio + (0xb << 2)); >> + writel(0x88, priv->mmio + (0xc << 2)); >> + writel(0x56, priv->mmio + (0xd << 2)); >> + } >> + } >> + >> + if (priv->enable_ssc) { >> + rockchip_combphy_updatel(priv, GENMASK(4, 4), BIT(4), 0x7 << 2); >> + >> + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_24MHz) { >> + /* Xin24M T0_1 650mV */ >> + writel(0x00, priv->mmio + (0x10 << 2)); >> + writel(0x32, priv->mmio + (0x11 << 2)); >> + writel(0x00, priv->mmio + (0x1b << 2)); >> + writel(0x90, priv->mmio + (0x0a << 2)); >> + writel(0x02, priv->mmio + (0x0b << 2)); >> + writel(0x08, priv->mmio + (0x0c << 2)); >> + writel(0x57, priv->mmio + (0x0d << 2)); >> + writel(0x40, priv->mmio + (0x0e << 2)); >> + writel(0x5f, priv->mmio + (0x0f << 2)); >> + writel(0x10, priv->mmio + (0x20 << 2)); >> + } >> + } >> + >> + return 0; >> +} > > -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576 2024-10-15 6:15 ` Heiko Stübner 2024-10-15 6:58 ` Frank Wang @ 2024-10-15 8:39 ` Shawn Lin 2024-10-15 8:47 ` Heiko Stübner 1 sibling, 1 reply; 9+ messages in thread From: Shawn Lin @ 2024-10-15 8:39 UTC (permalink / raw) To: Heiko Stübner, vkoul, kishon, robh, krzk+dt, conor+dt, Frank Wang Cc: shawn.lin, linux-phy, devicetree, linux-arm-kernel, linux-kernel, linux-rockchip, william.wu, tim.chen, Kever Yang, Frank Wang Hi Heiko 在 2024/10/15 14:15, Heiko Stübner 写道: > Hi Frank, > > Am Dienstag, 15. Oktober 2024, 03:33:51 CEST schrieb Frank Wang: >> From: Kever Yang <kever.yang@rock-chips.com> >> ... >> + writel(0x02, priv->mmio + (0xb << 2)); >> + writel(0x57, priv->mmio + (0xd << 2)); >> + >> + writel(0x5f, priv->mmio + (0xf << 2)); > > This does includes both the value as well as the register addresses, > because a hex-value with a bit shift makes that even less readable. > Actually, it's more readable when we need to debug, IMO. Because the PHY document provided is listing the registers just like what the patch did(0xb/0xd/0xf). So for example, we could easily find 0xb in the document, which refers to su_trim[15:8]. > Thanks a lot > Heiko > > >> + } >> + break; >> + case REF_CLOCK_25MHz: >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); >> + break; >> + case REF_CLOCK_100MHz: >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); >> + if (priv->type == PHY_TYPE_PCIE) { >> + /* gate_tx_pck_sel length select work for L1SS */ >> + writel(0xc0, priv->mmio + 0x74); >> + >> + /* PLL KVCO tuning fine */ >> + rockchip_combphy_updatel(priv, GENMASK(4, 2), 0x4 << 2, 0x20 << 2); >> + >> + /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */ >> + writel(0x4c, priv->mmio + (0x1b << 2)); >> + >> + /* Set up su_trim: T3_P1 650mv */ >> + writel(0x90, priv->mmio + (0xa << 2)); >> + writel(0x43, priv->mmio + (0xb << 2)); >> + writel(0x88, priv->mmio + (0xc << 2)); >> + writel(0x56, priv->mmio + (0xd << 2)); >> + } else if (priv->type == PHY_TYPE_SATA) { >> + /* downward spread spectrum +500ppm */ >> + rockchip_combphy_updatel(priv, GENMASK(7, 4), 0x50, 0x1f << 2); >> + >> + /* ssc ppm adjust to 3500ppm */ >> + rockchip_combphy_updatel(priv, GENMASK(3, 0), 0x7, 0x9 << 2); >> + } >> + break; >> + default: >> + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); >> + return -EINVAL; >> + } >> + >> + if (priv->ext_refclk) { >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); >> + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { >> + writel(0x10, priv->mmio + (0x20 << 2)); >> + >> + writel(0x0c, priv->mmio + (0x1b << 2)); >> + >> + /* Set up su_trim: T3_P1 650mv */ >> + writel(0x90, priv->mmio + (0xa << 2)); >> + writel(0x43, priv->mmio + (0xb << 2)); >> + writel(0x88, priv->mmio + (0xc << 2)); >> + writel(0x56, priv->mmio + (0xd << 2)); >> + } >> + } >> + >> + if (priv->enable_ssc) { >> + rockchip_combphy_updatel(priv, GENMASK(4, 4), BIT(4), 0x7 << 2); >> + >> + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_24MHz) { >> + /* Xin24M T0_1 650mV */ >> + writel(0x00, priv->mmio + (0x10 << 2)); >> + writel(0x32, priv->mmio + (0x11 << 2)); >> + writel(0x00, priv->mmio + (0x1b << 2)); >> + writel(0x90, priv->mmio + (0x0a << 2)); >> + writel(0x02, priv->mmio + (0x0b << 2)); >> + writel(0x08, priv->mmio + (0x0c << 2)); >> + writel(0x57, priv->mmio + (0x0d << 2)); >> + writel(0x40, priv->mmio + (0x0e << 2)); >> + writel(0x5f, priv->mmio + (0x0f << 2)); >> + writel(0x10, priv->mmio + (0x20 << 2)); >> + } >> + } >> + >> + return 0; >> +} > > > > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576 2024-10-15 8:39 ` Shawn Lin @ 2024-10-15 8:47 ` Heiko Stübner 2024-10-15 9:04 ` Shawn Lin 0 siblings, 1 reply; 9+ messages in thread From: Heiko Stübner @ 2024-10-15 8:47 UTC (permalink / raw) To: vkoul, kishon, robh, krzk+dt, conor+dt, Frank Wang, Shawn Lin Cc: shawn.lin, linux-phy, devicetree, linux-arm-kernel, linux-kernel, linux-rockchip, william.wu, tim.chen, Kever Yang, Frank Wang Hi Shawn, Am Dienstag, 15. Oktober 2024, 10:39:28 CEST schrieb Shawn Lin: > 在 2024/10/15 14:15, Heiko Stübner 写道: > > Am Dienstag, 15. Oktober 2024, 03:33:51 CEST schrieb Frank Wang: > >> From: Kever Yang <kever.yang@rock-chips.com> > >> > > ... > > >> + writel(0x02, priv->mmio + (0xb << 2)); > >> + writel(0x57, priv->mmio + (0xd << 2)); > >> + > >> + writel(0x5f, priv->mmio + (0xf << 2)); > > > > This does includes both the value as well as the register addresses, > > because a hex-value with a bit shift makes that even less readable. > > > > Actually, it's more readable when we need to debug, IMO. Because the > PHY document provided is listing the registers just like what the patch > did(0xb/0xd/0xf). So for example, we could easily find 0xb in the > document, which refers to su_trim[15:8]. Documentation-wise the rk3576 has gotten worse, compared to the rk3588 and before. I guess you're refering to a document that is not part of the trm-part1 pdf I guess. So I guess using register numbers somewhat matching the sparse document you have can be fine, but I guess try to use constants where possible. The block above though at least needs a comment about what is happening there. Heiko > >> + } > >> + break; > >> + case REF_CLOCK_25MHz: > >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); > >> + break; > >> + case REF_CLOCK_100MHz: > >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); > >> + if (priv->type == PHY_TYPE_PCIE) { > >> + /* gate_tx_pck_sel length select work for L1SS */ > >> + writel(0xc0, priv->mmio + 0x74); > >> + > >> + /* PLL KVCO tuning fine */ > >> + rockchip_combphy_updatel(priv, GENMASK(4, 2), 0x4 << 2, 0x20 << 2); > >> + > >> + /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */ > >> + writel(0x4c, priv->mmio + (0x1b << 2)); > >> + > >> + /* Set up su_trim: T3_P1 650mv */ > >> + writel(0x90, priv->mmio + (0xa << 2)); > >> + writel(0x43, priv->mmio + (0xb << 2)); > >> + writel(0x88, priv->mmio + (0xc << 2)); > >> + writel(0x56, priv->mmio + (0xd << 2)); > >> + } else if (priv->type == PHY_TYPE_SATA) { > >> + /* downward spread spectrum +500ppm */ > >> + rockchip_combphy_updatel(priv, GENMASK(7, 4), 0x50, 0x1f << 2); > >> + > >> + /* ssc ppm adjust to 3500ppm */ > >> + rockchip_combphy_updatel(priv, GENMASK(3, 0), 0x7, 0x9 << 2); > >> + } > >> + break; > >> + default: > >> + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); > >> + return -EINVAL; > >> + } > >> + > >> + if (priv->ext_refclk) { > >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); > >> + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { > >> + writel(0x10, priv->mmio + (0x20 << 2)); > >> + > >> + writel(0x0c, priv->mmio + (0x1b << 2)); > >> + > >> + /* Set up su_trim: T3_P1 650mv */ > >> + writel(0x90, priv->mmio + (0xa << 2)); > >> + writel(0x43, priv->mmio + (0xb << 2)); > >> + writel(0x88, priv->mmio + (0xc << 2)); > >> + writel(0x56, priv->mmio + (0xd << 2)); > >> + } > >> + } > >> + > >> + if (priv->enable_ssc) { > >> + rockchip_combphy_updatel(priv, GENMASK(4, 4), BIT(4), 0x7 << 2); > >> + > >> + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_24MHz) { > >> + /* Xin24M T0_1 650mV */ > >> + writel(0x00, priv->mmio + (0x10 << 2)); > >> + writel(0x32, priv->mmio + (0x11 << 2)); > >> + writel(0x00, priv->mmio + (0x1b << 2)); > >> + writel(0x90, priv->mmio + (0x0a << 2)); > >> + writel(0x02, priv->mmio + (0x0b << 2)); > >> + writel(0x08, priv->mmio + (0x0c << 2)); > >> + writel(0x57, priv->mmio + (0x0d << 2)); > >> + writel(0x40, priv->mmio + (0x0e << 2)); > >> + writel(0x5f, priv->mmio + (0x0f << 2)); > >> + writel(0x10, priv->mmio + (0x20 << 2)); > >> + } > >> + } > >> + > >> + return 0; > >> +} > > > > > > > > > > _______________________________________________ > > Linux-rockchip mailing list > > Linux-rockchip@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-rockchip > > -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576 2024-10-15 8:47 ` Heiko Stübner @ 2024-10-15 9:04 ` Shawn Lin 0 siblings, 0 replies; 9+ messages in thread From: Shawn Lin @ 2024-10-15 9:04 UTC (permalink / raw) To: Heiko Stübner, vkoul, kishon, robh, krzk+dt, conor+dt, Frank Wang Cc: shawn.lin, linux-phy, devicetree, linux-arm-kernel, linux-kernel, linux-rockchip, william.wu, tim.chen, Kever Yang, Frank Wang Hi Heiko, 在 2024/10/15 16:47, Heiko Stübner 写道: > Hi Shawn, > > Am Dienstag, 15. Oktober 2024, 10:39:28 CEST schrieb Shawn Lin: >> 在 2024/10/15 14:15, Heiko Stübner 写道: >>> Am Dienstag, 15. Oktober 2024, 03:33:51 CEST schrieb Frank Wang: >>>> From: Kever Yang <kever.yang@rock-chips.com> >>>> >> >> ... >> >>>> + writel(0x02, priv->mmio + (0xb << 2)); >>>> + writel(0x57, priv->mmio + (0xd << 2)); >>>> + >>>> + writel(0x5f, priv->mmio + (0xf << 2)); >>> >>> This does includes both the value as well as the register addresses, >>> because a hex-value with a bit shift makes that even less readable. >>> >> >> Actually, it's more readable when we need to debug, IMO. Because the >> PHY document provided is listing the registers just like what the patch >> did(0xb/0xd/0xf). So for example, we could easily find 0xb in the >> document, which refers to su_trim[15:8]. > > Documentation-wise the rk3576 has gotten worse, compared to the > rk3588 and before. I guess you're refering to a document that is not > part of the trm-part1 pdf I guess. Exactly. It's confidential, which is not part of TRM. > > So I guess using register numbers somewhat matching the sparse > document you have can be fine, but I guess try to use constants where > possible. > > The block above though at least needs a comment about what is > happening there. Got it. > > > Heiko > >>>> + } >>>> + break; >>>> + case REF_CLOCK_25MHz: >>>> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); >>>> + break; >>>> + case REF_CLOCK_100MHz: >>>> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); >>>> + if (priv->type == PHY_TYPE_PCIE) { >>>> + /* gate_tx_pck_sel length select work for L1SS */ >>>> + writel(0xc0, priv->mmio + 0x74); >>>> + >>>> + /* PLL KVCO tuning fine */ >>>> + rockchip_combphy_updatel(priv, GENMASK(4, 2), 0x4 << 2, 0x20 << 2); >>>> + >>>> + /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */ >>>> + writel(0x4c, priv->mmio + (0x1b << 2)); >>>> + >>>> + /* Set up su_trim: T3_P1 650mv */ >>>> + writel(0x90, priv->mmio + (0xa << 2)); >>>> + writel(0x43, priv->mmio + (0xb << 2)); >>>> + writel(0x88, priv->mmio + (0xc << 2)); >>>> + writel(0x56, priv->mmio + (0xd << 2)); >>>> + } else if (priv->type == PHY_TYPE_SATA) { >>>> + /* downward spread spectrum +500ppm */ >>>> + rockchip_combphy_updatel(priv, GENMASK(7, 4), 0x50, 0x1f << 2); >>>> + >>>> + /* ssc ppm adjust to 3500ppm */ >>>> + rockchip_combphy_updatel(priv, GENMASK(3, 0), 0x7, 0x9 << 2); >>>> + } >>>> + break; >>>> + default: >>>> + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); >>>> + return -EINVAL; >>>> + } >>>> + >>>> + if (priv->ext_refclk) { >>>> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); >>>> + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { >>>> + writel(0x10, priv->mmio + (0x20 << 2)); >>>> + >>>> + writel(0x0c, priv->mmio + (0x1b << 2)); >>>> + >>>> + /* Set up su_trim: T3_P1 650mv */ >>>> + writel(0x90, priv->mmio + (0xa << 2)); >>>> + writel(0x43, priv->mmio + (0xb << 2)); >>>> + writel(0x88, priv->mmio + (0xc << 2)); >>>> + writel(0x56, priv->mmio + (0xd << 2)); >>>> + } >>>> + } >>>> + >>>> + if (priv->enable_ssc) { >>>> + rockchip_combphy_updatel(priv, GENMASK(4, 4), BIT(4), 0x7 << 2); >>>> + >>>> + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_24MHz) { >>>> + /* Xin24M T0_1 650mV */ >>>> + writel(0x00, priv->mmio + (0x10 << 2)); >>>> + writel(0x32, priv->mmio + (0x11 << 2)); >>>> + writel(0x00, priv->mmio + (0x1b << 2)); >>>> + writel(0x90, priv->mmio + (0x0a << 2)); >>>> + writel(0x02, priv->mmio + (0x0b << 2)); >>>> + writel(0x08, priv->mmio + (0x0c << 2)); >>>> + writel(0x57, priv->mmio + (0x0d << 2)); >>>> + writel(0x40, priv->mmio + (0x0e << 2)); >>>> + writel(0x5f, priv->mmio + (0x0f << 2)); >>>> + writel(0x10, priv->mmio + (0x20 << 2)); >>>> + } >>>> + } >>>> + >>>> + return 0; >>>> +} >>> >>> >>> >>> >>> _______________________________________________ >>> Linux-rockchip mailing list >>> Linux-rockchip@lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/linux-rockchip >> >> > > > > -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] dt-bindings: phy: rockchip: add rk3576 compatible 2024-10-15 1:33 [PATCH 1/2] dt-bindings: phy: rockchip: add rk3576 compatible Frank Wang 2024-10-15 1:33 ` [PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576 Frank Wang @ 2024-10-15 6:06 ` Heiko Stübner 2024-10-15 20:20 ` Rob Herring (Arm) 2 siblings, 0 replies; 9+ messages in thread From: Heiko Stübner @ 2024-10-15 6:06 UTC (permalink / raw) To: vkoul, kishon, robh, krzk+dt, conor+dt, Frank Wang Cc: linux-phy, devicetree, linux-arm-kernel, linux-kernel, linux-rockchip, william.wu, tim.chen, Frank Wang Am Dienstag, 15. Oktober 2024, 03:33:50 CEST schrieb Frank Wang: > From: Frank Wang <frank.wang@rock-chips.com> > > Adds the compatible line to support RK3576 SoC. > > Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] dt-bindings: phy: rockchip: add rk3576 compatible 2024-10-15 1:33 [PATCH 1/2] dt-bindings: phy: rockchip: add rk3576 compatible Frank Wang 2024-10-15 1:33 ` [PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576 Frank Wang 2024-10-15 6:06 ` [PATCH 1/2] dt-bindings: phy: rockchip: add rk3576 compatible Heiko Stübner @ 2024-10-15 20:20 ` Rob Herring (Arm) 2 siblings, 0 replies; 9+ messages in thread From: Rob Herring (Arm) @ 2024-10-15 20:20 UTC (permalink / raw) To: Frank Wang Cc: linux-arm-kernel, tim.chen, devicetree, conor+dt, linux-phy, krzk+dt, william.wu, linux-rockchip, kishon, vkoul, linux-kernel, heiko, Frank Wang On Tue, 15 Oct 2024 09:33:50 +0800, Frank Wang wrote: > From: Frank Wang <frank.wang@rock-chips.com> > > Adds the compatible line to support RK3576 SoC. > > Signed-off-by: Frank Wang <frank.wang@rock-chips.com> > --- > .../devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml | 1 + > 1 file changed, 1 insertion(+) > Acked-by: Rob Herring (Arm) <robh@kernel.org> -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2024-10-15 20:21 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-10-15 1:33 [PATCH 1/2] dt-bindings: phy: rockchip: add rk3576 compatible Frank Wang 2024-10-15 1:33 ` [PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576 Frank Wang 2024-10-15 6:15 ` Heiko Stübner 2024-10-15 6:58 ` Frank Wang 2024-10-15 8:39 ` Shawn Lin 2024-10-15 8:47 ` Heiko Stübner 2024-10-15 9:04 ` Shawn Lin 2024-10-15 6:06 ` [PATCH 1/2] dt-bindings: phy: rockchip: add rk3576 compatible Heiko Stübner 2024-10-15 20:20 ` Rob Herring (Arm)
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).