Re: [PATCH v10 07/21] drm/mediatek: dpi: implement a CK/DE pol toggle in SoC config

[Rex-BC Chen <rex-bc.chen@mediatek.com>]

On Mon, 2022-05-30 at 15:44 +0800, CK Hu wrote:
> Hi, Guillaume:
> 
> On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote:
> > Adds a bit of flexibility to support SoCs without CK/DE pol support
> 
> It seems that DP_INTF has no CK/DE pol function. If so, could you
> explain why DP_INTF has this difference with DPI?
> 
> Regards,
> CK
> 

Hello CK,

Dp_intf does not support CK/DE polarity because the polarity
information is not used for eDP and DP while dp_intf is only for eDP
and DP.

I will add this in commit message in next version.

BRs,
Bo-Chen

> > 
> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@collabora.com>
> > Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_dpi.c | 22 +++++++++++++++++-----
> >  1 file changed, 17 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index 4746eb342567..545a1337cc89 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -125,6 +125,7 @@ struct mtk_dpi_conf {
> >  	bool edge_sel_en;
> >  	const u32 *output_fmts;
> >  	u32 num_output_fmts;
> > +	bool is_ck_de_pol;
> >  	const struct mtk_dpi_yc_limit *limit;
> >  };
> >  
> > @@ -211,13 +212,20 @@ static void mtk_dpi_config_pol(struct mtk_dpi
> > *dpi,
> >  			       struct mtk_dpi_polarities *dpi_pol)
> >  {
> >  	unsigned int pol;
> > +	unsigned int mask;
> >  
> > -	pol = (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ? 0 : CK_POL)
> > > 
> > 
> > -	      (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ? 0 : DE_POL)
> > > 
> > 
> > -	      (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> > HSYNC_POL) |
> > +	mask = HSYNC_POL | VSYNC_POL;
> > +	pol = (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> > HSYNC_POL) |
> >  	      (dpi_pol->vsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> > VSYNC_POL);
> > -	mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol,
> > -		     CK_POL | DE_POL | HSYNC_POL | VSYNC_POL);
> > +	if (dpi->conf->is_ck_de_pol) {
> > +		mask |= CK_POL | DE_POL;
> > +		pol |= (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ?
> > +			0 : CK_POL) |
> > +		       (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ?
> > +			0 : DE_POL);
> > +	}
> > +
> > +	mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol, mask);
> >  }
> >  
> >  static void mtk_dpi_config_3d(struct mtk_dpi *dpi, bool en_3d)
> > @@ -799,6 +807,7 @@ static const struct mtk_dpi_conf mt8173_conf =
> > {
> >  	.max_clock_khz = 300000,
> >  	.output_fmts = mt8173_output_fmts,
> >  	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> > +	.is_ck_de_pol = true,
> >  	.limit = &mtk_dpi_limit,
> >  };
> >  
> > @@ -809,6 +818,7 @@ static const struct mtk_dpi_conf mt2701_conf =
> > {
> >  	.max_clock_khz = 150000,
> >  	.output_fmts = mt8173_output_fmts,
> >  	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> > +	.is_ck_de_pol = true,
> >  	.limit = &mtk_dpi_limit,
> >  };
> >  
> > @@ -818,6 +828,7 @@ static const struct mtk_dpi_conf mt8183_conf =
> > {
> >  	.max_clock_khz = 100000,
> >  	.output_fmts = mt8183_output_fmts,
> >  	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> > +	.is_ck_de_pol = true,
> >  	.limit = &mtk_dpi_limit,
> >  };
> >  
> > @@ -827,6 +838,7 @@ static const struct mtk_dpi_conf mt8192_conf =
> > {
> >  	.max_clock_khz = 150000,
> >  	.output_fmts = mt8173_output_fmts,
> >  	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> > +	.is_ck_de_pol = true,
> >  	.limit = &mtk_dpi_limit,
> >  };
> >  
> 
> 


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy