messages from 2024-09-04 10:43:46 to 2024-09-13 13:38:07 UTC [more...]
[PATCH v2 0/5] Add support for PCIe3 on x1e80100
2024-09-13 13:37 UTC (11+ messages)
` [PATCH v2 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8
` [PATCH v2 2/5] dt-bindings: PCI: qcom: Add OPP table for X1E80100
` [PATCH v2 3/5] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3
` [PATCH v2 4/5] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks
` [PATCH v2 5/5] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100
[PATCH v2 0/5] Add support for DisplayPort on SA8775P platform
2024-09-13 12:35 UTC (9+ messages)
` [PATCH v2 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p
` [PATCH v2 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
` [PATCH v2 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P
` [PATCH v2 4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible
` [PATCH v2 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P
[PATCH v16 0/8] Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ
2024-09-13 9:46 UTC (8+ messages)
` [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver
` [EXT] "
[PATCH 0/8] Add support for PCIe3 on x1e80100
2024-09-13 8:41 UTC (15+ messages)
` [PATCH 4/8] arm64: dts: qcom: x1e80100: "
` [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies
[PATCH 1/2] dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
2024-09-13 4:45 UTC (2+ messages)
` [PATCH 2/2] phy: bcm-ns-usb2: drop support for old binding variant
[PATCH 0/5] Add support for DisplayPort on SA8775P platform
2024-09-12 10:04 UTC (14+ messages)
` [PATCH 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p
` [PATCH 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
` [PATCH 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P
` [PATCH 4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible
` [PATCH 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P
[PATCH 0/2] Extending PLL LUT for i.MX8MP Samsung HDMI PHY
2024-09-11 19:03 UTC (10+ messages)
` [PATCH 1/2] phy: freescale: fsl-samsung-hdmi: Add references for calculating LUT parameters to comment
` [PATCH 2/2] phy: freescale: fsl-samsung-hdmi: Add PLL LUT entries for some non-CEA-861 modes
[PATCH 0/4] phy: qcom: qmp-usb: fix NULL-deref on runtime suspend
2024-09-11 19:01 UTC (7+ messages)
` [PATCH 1/4] "
` [PATCH 2/4] phy: qcom: qmp-usb-legacy: "
` [PATCH 3/4] phy: qcom: qmp-usbc: "
` [PATCH 4/4] phy: qcom: qmp-usb: move driver data initialisation earlier
[PATCH v8 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver
2024-09-11 10:46 UTC (6+ messages)
` [PATCH v8 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings
` [PATCH v8 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY
` [PATCH v8 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver
` [PATCH v8 4/5] arm64: dts: st: Add combophy node on stm32mp251
` [PATCH v8 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board
[PATCH v7 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver
2024-09-11 10:37 UTC (5+ messages)
` [PATCH v7 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings
` [PATCH v7 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY
` [PATCH v7 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver
` [PATCH v7 4/5] arm64: dts: st: Add combophy node on stm32mp251
[PATCH v6 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver
2024-09-11 8:25 UTC (6+ messages)
` [PATCH v6 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings
` [PATCH v6 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY
` [PATCH v6 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver
` [PATCH v6 4/5] arm64: dts: st: Add combophy node on stm32mp251
` [PATCH v6 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board
[PATCH V7 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options
2024-09-11 7:07 UTC (13+ messages)
` [PATCH V7 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro
` [PATCH V7 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup
` [PATCH V7 3/5] xphy: freescale: fsl-samsung-hdmi: Support dynamic integer
` [PATCH V7 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider
` [PATCH V7 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries
[PATCH v2] dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300
2024-09-11 6:56 UTC
[PATCH v5 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
2024-09-11 6:17 UTC (5+ messages)
` [PATCH v5 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95
` [PATCH v5 3/5] phy: fsl-imx8mq-usb: add tca function driver "
` [PATCH v5 4/5] arm64: dts: imx95: add usb3 related nodes
` [PATCH v5 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node
[PATCH v4 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
2024-09-11 6:09 UTC (7+ messages)
` [PATCH v4 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95
` [PATCH v4 3/5] phy: fsl-imx8mq-usb: add tca function driver "
` [PATCH v4 4/5] arm64: dts: imx95: add usb3 related nodes
` [PATCH v4 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node
[PATCH] phy: ti: phy-j721e-wiz: fix usxgmii configuration
2024-09-10 9:17 UTC
[PATCH v2 0/9] phy: sparx5-serdes: add support for lan969x serdes driver
2024-09-10 8:59 UTC (12+ messages)
` [PATCH v2 1/9] phy: sparx5-serdes: add support for private match data
` [PATCH v2 2/9] phy: sparx5-serdes: add constants to "
` [PATCH v2 3/9] phy: sparx5-serdes: add constant for the number of CMU's
` [PATCH v2 4/9] phy: sparx5-serdes: add ops to match data
` [PATCH v2 5/9] phy: sparx5-serdes: add function for getting the CMU index
` [PATCH v2 6/9] phy: sparx5-serdes: add indirection layer to register macros
` [PATCH v2 7/9] phy: sparx5-serdes: add support for branching on chip type
` [PATCH v2 8/9] dt-bindings: phy: sparx5: document lan969x
` [PATCH v2 9/9] phy: lan969x-serdes: add support for lan969x serdes driver
[PATCH V6 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options
2024-09-09 12:46 UTC (16+ messages)
` [PATCH V6 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro
` [PATCH V6 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup
` [PATCH V6 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer
` [PATCH V6 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider
` [PATCH V6 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries
[PATCH v3 0/1] Fix configuration for on-chip USB 2.0 support
2024-09-09 11:02 UTC (3+ messages)
` [PATCH v3 1/1] phy: starfive: jh7110-usb: Fix link configuration to controller
[PATCH 0/9] phy: sparx5-serdes: add support for lan969x serdes driver
2024-09-09 10:42 UTC (15+ messages)
` [PATCH 1/9] phy: sparx5-serdes: add support for private match data
` [PATCH 2/9] phy: sparx5-serdes: add constants to "
` [PATCH 3/9] phy: sparx5-serdes: add constant for the number of CMU's
` [PATCH 4/9] phy: sparx5-serdes: add ops to match data
` [PATCH 5/9] phy: sparx5-serdes: add function for getting the CMU index
` [PATCH 6/9] phy: sparx5-serdes: add indirection layer to register macros
` [PATCH 7/9] phy: sparx5-serdes: add support for branching on chip type
` [PATCH 8/9] dt-bindings: phy: sparx5: document lan969x in sparx5 dt-bindings
` [PATCH 9/9] phy: lan969x-serdes: add support for lan969x serdes driver
[PATCH v5 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver
2024-09-09 8:40 UTC (5+ messages)
` [PATCH v5 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY
[PATCH v2] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
2024-09-09 7:07 UTC (5+ messages)
[PATCH] phy: qcom: edp: Add runtime PM support
2024-09-08 18:55 UTC (7+ messages)
[PATCH v3] phy: mvebu-cp110-utmi: support swapping d+/d- lanes by dts property
2024-09-08 8:34 UTC
[PATCH 19/19] arm64: dts: qcom: add base QCS8300 RIDE dts
2024-09-07 23:22 UTC (2+ messages)
[PATCH] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
2024-09-07 10:54 UTC (2+ messages)
[PATCH v2 0/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver
2024-09-06 9:28 UTC (6+ messages)
` [PATCH v2 2/2] "
[PATCH v7 0/6] HDMI TX support in msm8998
2024-09-05 16:14 UTC (3+ messages)
[PATCH V3 0/6] Enable IPQ5018 PCI support
2024-09-05 13:47 UTC (7+ messages)
` [PATCH V3 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
` [PATCH V3 3/6] phy: qcom: Introduce PCIe UNIPHY 28LP driver
[PATCH 00/19] Add initial support for QCS8300
2024-09-05 11:31 UTC (7+ messages)
` [PATCH 03/19] dt-bindings: phy: Add QMP UFS PHY comptible "
` [PATCH 06/19] dt-bindings: power: rpmpd: Add QCS8300 power domains
[PATCH v3 0/3] Improve error handling in Rockchip Inno USB 2.0 PHY driver
2024-09-05 9:16 UTC (5+ messages)
` [PATCH v3 1/3] phy: phy-rockchip-inno-usb2: Perform trivial code cleanups
` [PATCH v3 2/3] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better
` [PATCH v3 3/3] phy: phy-rockchip-inno-usb2: Use dev_err_probe() in the probe path
[PATCH V2 0/6] Enable IPQ5018 PCI support
2024-09-04 17:47 UTC (7+ messages)
` [PATCH V2 4/6] PCI: qcom: Add support for IPQ5018
` [PATCH V2 5/6] arm64: dts: qcom: ipq5018: Add PCIe related nodes
[PATCH V5 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options
2024-09-04 14:14 UTC (14+ messages)
` [PATCH V5 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer
` [PATCH V5 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider
` [PATCH V5 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries
[PATCH V4 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options
2024-09-04 10:37 UTC (4+ messages)
` [PATCH V4 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).