messages from 2024-09-10 07:05:22 to 2024-09-24 07:06:22 UTC [more...]
[PATCH v16 0/8] Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ
2024-09-24 7:04 UTC (12+ messages)
` [PATCH v16 2/8] phy: Add HDMI configuration options
` [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver
` [EXT] "
[RESEND PATCH 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576
2024-09-24 2:24 UTC (4+ messages)
` [RESEND PATCH 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576
[PATCH] phy: tegra: xusb: Call of_node_put(np) only once in tegra_xusb_padctl_get()
2024-09-23 20:04 UTC
[PATCH] phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK
2024-09-23 16:40 UTC
[PATCH v3 0/6] Add support for PCIe3 on x1e80100
2024-09-23 14:00 UTC (9+ messages)
` [PATCH v3 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8
` [PATCH v3 2/6] dt-bindings: PCI: qcom: Add OPP table for X1E80100
` [PATCH v3 3/6] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3
` [PATCH v3 4/6] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks
` [PATCH v3 5/6] PCI: qcom: Add new cfg and ops without config_sid callback for X1E80100
` [PATCH v3 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100
[PATCH v3 0/5] Add support for DisplayPort on SA8775P platform
2024-09-23 11:47 UTC (9+ messages)
` [PATCH v3 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p
` [PATCH v3 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
` [PATCH v3 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P
` [PATCH v3 4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible
` [PATCH v3 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P
[PATCH 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576
2024-09-23 2:44 UTC (2+ messages)
` [PATCH 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576
[PATCH v2 0/5] Add support for PCIe3 on x1e80100
2024-09-22 17:09 UTC (24+ messages)
` [PATCH v2 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8
` [PATCH v2 2/5] dt-bindings: PCI: qcom: Add OPP table for X1E80100
` [PATCH v2 3/5] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3
` [PATCH v2 4/5] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks
` [PATCH v2 5/5] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100
[PATCH] phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
2024-09-20 9:36 UTC
[PATCH] phy: qcom: edp: Add runtime PM support
2024-09-20 9:02 UTC (5+ messages)
[PATCH 0/3] arm64: dts: qcom: x1e80100: fix missing PCIe PHY clocks
2024-09-18 17:14 UTC (8+ messages)
` [PATCH 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks
` [PATCH 2/3] arm64: dts: qcom: x1e80100: fix PCIe4 and PCIe6a PHY clocks
` [PATCH 3/3] arm64: dts: qcom: x1e80100: fix PCIe5 "
[PATCH 0/4] phy: Fix some typos in phy-airoha-pcie driver
2024-09-18 13:32 UTC (5+ messages)
` [PATCH 1/4] phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
` [PATCH 2/4] phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
` [PATCH 3/4] phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
` [PATCH 4/4] phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
[PATCH 0/5] Add support for DisplayPort on SA8775P platform
2024-09-17 13:44 UTC (17+ messages)
` [PATCH 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p
` [PATCH 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
` [PATCH 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P
` [PATCH 4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible
` [PATCH 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P
[PATCH 0/2] MIPI DSI phy for rk3588
2024-09-17 10:49 UTC (2+ messages)
` "
[PATCH v2 0/5] Add support for DisplayPort on SA8775P platform
2024-09-17 9:41 UTC (18+ messages)
` [PATCH v2 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p
` [PATCH v2 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
` [PATCH v2 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P
` [PATCH v2 4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible
` [PATCH v2 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P
[PATCH v2] dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300
2024-09-16 14:53 UTC (2+ messages)
[PATCH V8 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options
2024-09-16 7:16 UTC (8+ messages)
` [PATCH V8 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro
` [PATCH V8 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup
` [PATCH V8 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer
` [PATCH V8 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider
` [PATCH V8 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries
[PATCH v4] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
2024-09-15 15:23 UTC (2+ messages)
[RESEND PATCH v4 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
2024-09-15 14:18 UTC (2+ messages)
` [RESEND PATCH v4 1/1] "
[PATCH v4 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip
2024-09-15 14:13 UTC (2+ messages)
` [PATCH v4 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
[PATCH v3] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
2024-09-14 16:11 UTC (2+ messages)
[PATCH v8 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver
2024-09-14 13:26 UTC (7+ messages)
` [PATCH v8 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings
` [PATCH v8 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY
` [PATCH v8 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver
` [PATCH v8 4/5] arm64: dts: st: Add combophy node on stm32mp251
` [PATCH v8 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board
[PATCH v3 0/1] Fix configuration for on-chip USB 2.0 support
2024-09-14 6:49 UTC (4+ messages)
` [PATCH v3 1/1] phy: starfive: jh7110-usb: Fix link configuration to controller
[PATCH 1/2] dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
2024-09-13 18:24 UTC (3+ messages)
` [PATCH 2/2] phy: bcm-ns-usb2: drop support for old binding variant
[PATCH 0/8] Add support for PCIe3 on x1e80100
2024-09-13 8:41 UTC (15+ messages)
` [PATCH 4/8] arm64: dts: qcom: x1e80100: "
` [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies
[PATCH 0/2] Extending PLL LUT for i.MX8MP Samsung HDMI PHY
2024-09-11 19:03 UTC (10+ messages)
` [PATCH 1/2] phy: freescale: fsl-samsung-hdmi: Add references for calculating LUT parameters to comment
` [PATCH 2/2] phy: freescale: fsl-samsung-hdmi: Add PLL LUT entries for some non-CEA-861 modes
[PATCH 0/4] phy: qcom: qmp-usb: fix NULL-deref on runtime suspend
2024-09-11 19:01 UTC (7+ messages)
` [PATCH 1/4] "
` [PATCH 2/4] phy: qcom: qmp-usb-legacy: "
` [PATCH 3/4] phy: qcom: qmp-usbc: "
` [PATCH 4/4] phy: qcom: qmp-usb: move driver data initialisation earlier
[PATCH v7 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver
2024-09-11 10:37 UTC (5+ messages)
` [PATCH v7 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings
` [PATCH v7 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY
` [PATCH v7 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver
` [PATCH v7 4/5] arm64: dts: st: Add combophy node on stm32mp251
[PATCH v6 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver
2024-09-11 8:25 UTC (6+ messages)
` [PATCH v6 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings
` [PATCH v6 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY
` [PATCH v6 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver
` [PATCH v6 4/5] arm64: dts: st: Add combophy node on stm32mp251
` [PATCH v6 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board
[PATCH V7 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options
2024-09-11 7:07 UTC (13+ messages)
` [PATCH V7 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro
` [PATCH V7 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup
` [PATCH V7 3/5] xphy: freescale: fsl-samsung-hdmi: Support dynamic integer
` [PATCH V7 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider
` [PATCH V7 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries
[PATCH v5 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
2024-09-11 6:17 UTC (5+ messages)
` [PATCH v5 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95
` [PATCH v5 3/5] phy: fsl-imx8mq-usb: add tca function driver "
` [PATCH v5 4/5] arm64: dts: imx95: add usb3 related nodes
` [PATCH v5 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node
[PATCH v4 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
2024-09-11 6:09 UTC (6+ messages)
` [PATCH v4 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95
` [PATCH v4 4/5] arm64: dts: imx95: add usb3 related nodes
` [PATCH v4 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node
[PATCH] phy: ti: phy-j721e-wiz: fix usxgmii configuration
2024-09-10 9:17 UTC
[PATCH v2 0/9] phy: sparx5-serdes: add support for lan969x serdes driver
2024-09-10 8:59 UTC (4+ messages)
` [PATCH v2 8/9] dt-bindings: phy: sparx5: document lan969x
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).