messages from 2025-05-21 22:19:09 to 2025-06-04 10:02:47 UTC [more...]
[PATCH v4 0/5] drm/msm/hdmi & phy: use generic PHY framework
2025-05-22 12:39 UTC (8+ messages)
` [PATCH v4 1/5] drm/msm/hdmi: switch to generic PHY subsystem
` [PATCH v4 2/5] phy: qcom: apq8064-sata: extract UNI PLL register defines
` [PATCH v4 3/5] phy: qcom-uniphy: add more registers from display PHYs
[PATCH v1 0/4] pci: qcom: drop unrelated clock and add link_down reset for sa8775p
2025-06-04 10:02 UTC (9+ messages)
` [PATCH v1 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings "
` [PATCH v1 2/4] dt-bindings: PCI: qcom,pcie-sa8775p: document link_down reset
` [PATCH v1 3/4] arm64: dts: qcom: sa8775p: remove aux clock from pcie phy
` [PATCH v1 4/4] arm64: dts: qcom: sa8775p: add link_down reset for pcie
[PATCH v4 0/2] Update PCIe PHY settings for QCS8300 and SA8775P
2025-06-04 9:21 UTC (4+ messages)
` [PATCH v4 1/2] phy: qcom: qmp-pcie: Update PHY settings for QCS8300 & SA8775P
` [PATCH v4 2/2] arm64: dts: qcom: sa8775p: Remove max link speed property for PCIe EP
[PATCH v1 0/2] Add Equalization Settings for 8.0 GT/s and Add PCIe Lane Equalization Preset Properties for 8.0 GT/s and 16.0 GT/s
2025-06-04 9:19 UTC (3+ messages)
` [PATCH v1 1/2] PCI: qcom: Add equalization settings for 8.0 GT/s
` [PATCH v1 2/2] arm64: dts: qcom: sa8775p: Add PCIe lane equalization preset properties
[PATCH v4 0/5] arm64: qcom: x1e80100-qcp: Add power supply and sideband signals for PCIe RC
2025-06-04 8:02 UTC (6+ messages)
` [PATCH v4 1/5] arm64: Kconfig: enable PCI Power Control Slot driver for QCOM
` [PATCH v4 2/5] arm64: dts: qcom: x1e80100: add bus topology for PCIe domain 3
` [PATCH v4 3/5] arm64: dts: qcom: x1e80100-qcp: enable pcie3 x8 slot for X1E80100-QCP
` [PATCH v4 4/5] arm64: dts: qcom: x1e80100-qcp: Add qref supply for PCIe PHYs
` [PATCH v4 5/5] phy: qcom: qmp-pcie: add x1e80100 qref supplies
[PATCH V6 00/10] Refactor ufs phy powerup sequence
2025-06-04 7:37 UTC (13+ messages)
` [PATCH V6 01/10] scsi: ufs: qcom: Prevent calling phy_exit before phy_init
` [PATCH V6 02/10] scsi: ufs: qcom: add a new phy calibrate API call
` [PATCH V6 03/10] phy: qcom-qmp-ufs: Rename qmp_ufs_enable and qmp_ufs_power_on
` [PATCH V6 04/10] phy: qcom-qmp-ufs: Refactor phy_power_on and phy_calibrate callbacks
` [PATCH V6 05/10] phy: qcom-qmp-ufs: Refactor UFS PHY reset
` [PATCH V6 06/10] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()
` [PATCH V6 07/10] phy: qcom-qmp-ufs: Rename qmp_ufs_power_off
` [PATCH V6 08/10] phy: qcom-qmp-ufs: Remove qmp_ufs_exit() and Inline qmp_ufs_com_exit()
` [PATCH V6 09/10] phy: qcom-qmp-ufs: refactor qmp_ufs_power_off
` [PATCH V6 10/10] scsi: ufs: qcom : Refactor phy_power_on/off calls
[PATCH v3 0/2] Update PCIe PHY settings for QCS8300 and SA8775P
2025-06-04 6:34 UTC (9+ messages)
` [PATCH v3 1/2] phy: qcom: qmp-pcie: Update PHY settings for QCS8300 & SA8775P
` [PATCH v3 2/2] arm64: dts: qcom: sa8775p: Remove max link speed property for PCIe EP
[PATCH v3 0/6] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode
2025-06-03 13:17 UTC (27+ messages)
` [PATCH v3 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch
` [PATCH v3 2/6] phy: qcom: qmp-combo: Rename 'mode' to 'phy_mode'
` [PATCH v3 3/6] phy: qcom: qmp-combo: store DP phy power state
` [PATCH v3 4/6] phy: qcom: qmp-combo: introduce QMPPHY_MODE
` [PATCH v3 5/6] phy: qcom: qmp-combo: register a typec mux to change the QMPPHY_MODE
` [PATCH v3 6/6] arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13: Set up 4-lane DP
[PATCH v5 0/4] Add USB2.0 PHY and USB3.0 PHY support for SpacemiT K1
2025-06-03 12:30 UTC (7+ messages)
` [PATCH v5 1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY
` [PATCH v5 2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY
` [PATCH v5 3/4] phy: spacemit: support K1 USB2.0 PHY controller
` [PATCH v5 4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY
[PATCH 1/1] dt-bindings: mfd: convert lpc1850-creg-clk.txt pc1850-dmamux.txt phy-lpc18xx-usb-otg.txt to yaml format
2025-06-02 14:36 UTC
[PATCH] phy: use per-PHY lockdep keys
2025-06-02 9:10 UTC (2+ messages)
[PATCH v3 0/5] arm64: qcom: x1e80100-qcp: Add power supply and sideband signals for PCIe RC
2025-05-31 19:26 UTC (10+ messages)
` [PATCH v3 2/5] arm64: dts: qcom: x1e80100: add bus topology for PCIe domain 3
` [PATCH v3 5/5] phy: qcom: qmp-pcie: add x1e80100 qref supplies
[PATCH v2] phy: use per-PHY lockdep keys
2025-05-30 16:08 UTC
[PATCH 00/10] Add PCIe support for Tesla FSD SoC
2025-05-29 10:24 UTC (28+ messages)
` [PATCH 02/10] PCI: exynos: Remove unused MACROs in exynos PCI file
` [PATCH 03/10] PCI: exynos: Reorder MACROs to maintain consistency
` [PATCH 04/10] PCI: exynos: Add platform device private data
` [PATCH 05/10] PCI: exynos: Add structure to hold resource operations
` [PATCH 06/10] dt-bindings: PCI: Add bindings support for Tesla FSD SoC
` [PATCH 07/10] dt-bindings: phy: Add PHY bindings support for "
` [PATCH 08/10] phy: exynos: Add PCIe PHY "
` [PATCH 09/10] PCI: exynos: Add support for Tesla "
[PATCH v6 0/6] pci: qcom: Add QCS8300 PCIe support
2025-05-29 3:56 UTC (7+ messages)
` [PATCH v6 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300
` [PATCH v6 2/6] dt-bindings: PCI: qcom,pcie-sa8775p: document qcs8300
` [PATCH v6 3/6] arm64: dts: qcom: qcs8300: enable pcie0
` [PATCH v6 4/6] arm64: dts: qcom: qcs8300-ride: enable pcie0 interface
` [PATCH v6 5/6] arm64: dts: qcom: qcs8300: enable pcie1
` [PATCH v6 6/6] arm64: dts: qcom: qcs8300-ride: enable pcie1 interface
[PATCH v6 00/10] phy: qcom: Introduce USB support for SM8750
2025-05-28 12:37 UTC (14+ messages)
` [PATCH v6 01/10] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Add SM8750 to QMP PHY
` [PATCH v6 02/10] dt-bindings: phy: Add the M31 based eUSB2 PHY bindings
` [PATCH v6 03/10] dt-bindings: usb: qcom,dwc3: Correct the SM8750 compatible
` [PATCH v6 04/10] phy: qcom: qmp-combo: Add new PHY sequences for SM8750
` [PATCH v6 05/10] phy: qcom: Update description for QCOM based eUSB2 repeater
` [PATCH v6 06/10] phy: qcom: Add M31 based eUSB2 PHY driver
` [PATCH v6 07/10] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs
` [PATCH v6 08/10] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform
` [PATCH v6 09/10] arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform
` [PATCH v6 10/10] arm64: defconfig: Add M31 eUSB2 PHY config
[PATCH] dt-bindings: phy: renesas,usb2-phy: Document RZ/V2N SoC support
2025-05-28 13:45 UTC (2+ messages)
[PATCH v2 00/18] drm/bridge: cdns-dsi: Make it work a bit better
2025-05-28 13:23 UTC (6+ messages)
` [PATCH v2 03/18] drm/tidss: Adjust the pclk based on the HW capabilities
[PATCH v3 0/2] phy: renesas: r8a779f0-ether-serdes: driver enhancement
2025-05-28 5:25 UTC (3+ messages)
` [PATCH v3 1/2] phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
` [PATCH v3 2/2] phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
[PATCH 0/5] eDP driver for mt8196
2025-05-28 1:52 UTC (7+ messages)
` [PATCH 3/5] drm/mediatek: Add dvo "
` [PATCH 4/5] drm/mediatek: Add eDP "
` [PATCH 5/5] drm/mediatek: Add eDP phy "
[PATCH 0/8] Add DisplayPort support for QCS615 platform
2025-05-27 20:49 UTC (6+ messages)
` [PATCH 7/8] drm/msm/dp: Retry Link Training 2 with lower pattern
[PATCH V5 00/11] Refactor ufs phy powerup sequence
2025-05-27 15:22 UTC (22+ messages)
` [PATCH V5 07/11] phy: qcom-qmp-ufs: Remove qmp_ufs_exit() and Inline qmp_ufs_com_exit()
` [PATCH V5 09/11] scsi: ufs: qcom : Refactor phy_power_on/off calls
` [PATCH V5 10/11] scsi: ufs: qcom : Introduce phy_power_on/off wrapper function
` [PATCH V5 11/11] scsi: ufs: qcom: Prevent calling phy_exit before phy_init
[PATCH v5 0/4] pci: qcom: Add QCS615 PCIe support
2025-05-27 13:37 UTC (6+ messages)
` [PATCH v5 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615
` [PATCH v5 2/4] dt-bindings: PCI: qcom,pcie-sm8150: document qcs615
` [PATCH v5 3/4] arm64: dts: qcom: qcs615: enable pcie
` [PATCH v5 4/4] arm64: dts: qcom: qcs615-ride: Enable PCIe interface
[PATCH v2 0/2] phy: renesas: r8a779f0-ether-serdes: driver enhancement
2025-05-27 11:32 UTC (5+ messages)
` [PATCH v2 1/2] phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
` [PATCH v2 2/2] phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
[PATCH v4 0/4] Add USB2.0 PHY and USB3.0 PHY support for SpacemiT K1
2025-05-26 16:13 UTC (8+ messages)
` [PATCH v4 1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY
` [PATCH v4 2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY
` [PATCH v4 3/4] phy: spacemit: support K1 USB2.0 PHY controller
` [PATCH v4 4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY
[PATCH v3 0/2] Fix PLL lock timeout and calibration wait time
2025-05-26 10:59 UTC (3+ messages)
` [PATCH v3 1/2] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
[PATCH 0/7] phy: phy-snps-eusb2: fixes and cleanups
2025-05-26 8:27 UTC (16+ messages)
` [PATCH 1/7] phy: phy-snps-eusb2: fix clock imbalance on phy_exit()
` [PATCH 2/7] phy: phy-snps-eusb2: fix repeater imbalance on phy_init() failure
` [PATCH 3/7] phy: phy-snps-eusb2: rename phy_init() clock error label
` [PATCH 4/7] phy: phy-snps-eusb2: clean up error messages
` [PATCH 5/7] phy: phy-snps-eusb2: fix optional phy lookup parameter
` [PATCH 6/7] phy: phy-snps-eusb2: drop unnecessary loop index declarations
` [PATCH 7/7] phy: phy-snps-eusb2: clean up id table sentinel
[bug report] phy: qcom: Add QCOM SNPS eUSB2 driver
2025-05-23 15:59 UTC
[PATCH] phy: drop probe registration printks
2025-05-23 8:51 UTC
[PATCH v5 00/10] phy: qcom: Introduce USB support for SM8750
2025-05-22 15:09 UTC (10+ messages)
` [PATCH v5 06/10] phy: qcom: Add M31 based eUSB2 PHY driver
[PATCH v3 00/12] Add initial USB support for the Renesas RZ/G3S SoC
2025-05-22 14:49 UTC (11+ messages)
` [PATCH v3 05/12] dt-bindings: phy: renesas,usb2-phy: Add renesas,sysc-signals
` [PATCH v3 09/12] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
[PATCH v3 08/12] reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY signal
2025-05-22 11:29 UTC (2+ messages)
[PATCH v2 0/2] initial usbdrd phy support for Exynosautov920 soc
2025-05-22 7:22 UTC (7+ messages)
` [PATCH v2 2/2] phy: exyons5-usbdrd: support HS phy for ExynosAutov920
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).