public inbox for linux-phy@lists.infradead.org
 help / color / mirror / Atom feed
 messages from 2025-06-26 02:53:34 to 2025-07-08 20:30:12 UTC [more...]

[PATCH 00/12] Add HDMI 2.1 FRL support to phy-rockchip-samsung-hdptx
 2025-07-08 19:35 UTC  (10+ messages)
` [PATCH 01/12] phy: hdmi: Add HDMI 2.1 FRL configuration options
` [PATCH 02/12] phy: rockchip: samsung-hdptx: Reduce ROPLL loop bandwidth
` [PATCH 03/12] phy: rockchip: samsung-hdptx: Prevent Inter-Pair Skew from exceeding the limits
` [PATCH 04/12] phy: rockchip: samsung-hdptx: Use usleep_range() instead of udelay()
` [PATCH 05/12] phy: rockchip: samsung-hdptx: Fix coding style alignment
` [PATCH 06/12] phy: rockchip: samsung-hdptx: Consistently use [rk_]hdptx_[tmds_] prefixes
` [PATCH 07/12] phy: rockchip: samsung-hdptx: Enable lane output in common helper
` [PATCH 08/12] phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
` [PATCH 09/12] phy: rockchip: samsung-hdptx: Compute clk rate from PLL config

[PATCH] dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties
 2025-07-08 19:15 UTC  (2+ messages)

[PATCH] dt-bindings: phy: marvell,mmp2-usb-phy: Drop status from the example
 2025-07-08 16:08 UTC  (2+ messages)

[PATCH 0/4] Add support for eUSB2 repeater on PMIV0104
 2025-07-08  8:31 UTC  (7+ messages)
` [PATCH 1/4] dt-bindings: phy: qcom,snps-eusb2-repeater: Document qcom,tune-res-fsdif
` [PATCH 3/4] dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for PMIV0104

[PATCH v5 0/2] riscv: sophgo: add USB phy support for CV18XX series
 2025-07-08  6:30 UTC  (3+ messages)
` [PATCH v5 1/2] dt-bindings: phy: Add Sophgo CV1800 USB phy
` [PATCH v5 2/2] phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X

[RESEND PATCH v9 0/4] PCI: rockchip: Improve driver quality
 2025-07-07 23:04 UTC  (11+ messages)
` [RESEND PATCH v9 1/4] PCI: rockchip: Use standard PCIe defines
` [RESEND PATCH v9 2/4] PCI: rockchip: Set Target Link Speed before retraining
` [RESEND PATCH v9 3/4] phy: rockchip-pcie: Enable all four lanes if required
` [RESEND PATCH v9 4/4] phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal
` (subset) [RESEND PATCH v9 0/4] PCI: rockchip: Improve driver quality

[PATCH 0/2] Fixes for Exynos7870 MIPI PHY support
 2025-07-07 18:19 UTC  (6+ messages)
` [PATCH 1/2] phy: exynos-mipi-video: correct cam0 sysreg compatible for exynos7870
` [PATCH 2/2] phy: exynos-mipi-video: allow skipping absent PHYs

[PATCH] phy: qcom-qmp-ufs: Fix HS-G4 PHY init table for sc7280
 2025-07-07 13:24 UTC  (5+ messages)

[PATCH v4 0/6] initial usbdrd phy support for Exynosautov920 soc
 2025-07-06  9:44 UTC  (10+ messages)
  ` [PATCH v4 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible
  ` [PATCH v4 2/6] phy: exynos5-usbdrd: support HS phy for ExynosAutov920
  ` [PATCH v4 3/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo HS phy
  ` [PATCH v4 4/6] phy: exynos5-usbdrd: support HS combo phy for ExynosAutov920
  ` [PATCH v4 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo SS phy
  ` [PATCH v4 6/6] phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920

[PATCH v2 00/10] Add PCIe support for Tesla FSD SoC
 2025-07-05  7:47 UTC  (25+ messages)
  ` [PATCH v2 06/10] dt-bindings: PCI: Add bindings "
  ` [PATCH v2 07/10] dt-bindings: phy: Add PHY bindings support for "
  ` [PATCH v2 08/10] phy: exynos: Add PCIe PHY "
  ` [PATCH v2 09/10] PCI: exynos: Add support for Tesla "
  ` [PATCH v2 10/10] arm64: dts: fsd: Add PCIe "

[PATCH v4 0/2] Fix PLL lock timeout and calibration wait time
 2025-07-05  3:02 UTC  (4+ messages)
` [PATCH v4 1/2] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
` [PATCH v4 2/2] phy: cadence: cdns-dphy: Update calibration wait time for startup state machine

[PATCH 52/80] phy: motorola: phy-mapphone-mdm6600: Remove redundant pm_runtime_mark_last_busy() calls
 2025-07-04  7:54 UTC  (2+ messages)
` [PATCH 53/80] phy: ti: phy-twl4030-usb: "

[PATCH v8 0/3] pci: qcom: Add QCS615 PCIe support
 2025-07-04  7:44 UTC  (5+ messages)
` [PATCH v8 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615
` [PATCH v8 2/3] arm64: dts: qcom: qcs615: enable pcie
` [PATCH v8 3/3] arm64: dts: qcom: qcs615-ride: Enable PCIe interface

[PATCH 0/7] media: add imx93 mipi/controller csi support
 2025-07-04  2:04 UTC  (20+ messages)
` [PATCH 1/7] dt-bindings: media: add DW MIPI CSI-2 Host support
` [PATCH 2/7] dt-bindings: soc: imx-blk-ctrl: add MIPI CSI2 dphy support
` [PATCH 3/7] pmdomain: imx93-blk-ctrl: populate child devices
` [PATCH 4/7] phy: freescale: add imx93 MIPI CSI2 DPHY support
` [PATCH 5/7] media: nxp: add DesignWare MIPI CSI2 controller driver
` [PATCH NOT MERGE 6/7] arm64: dts: imx93-11x11-evk: add camera related nodes
` [PATCH NOT MERGE 7/7] media: i2c: add AP1302 driver from community

[PATCH v2 0/2] Add new phy_notify_pmstate() api
 2025-07-03 13:03 UTC  (3+ messages)
` [PATCH v2 1/2] phy: add "
` [PATCH v2 2/2] phy: samsung: gs101-ufs: Add .notify_pmstate() and hibern8 enter/exit values

[PATCH v4 0/2] phy: renesas: r8a779f0-ether-serdes: driver enhancement
 2025-07-03 11:07 UTC  (3+ messages)
` [PATCH v4 1/2] phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
` [PATCH v4 2/2] phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet

[PATCH v7 0/3] pci: qcom: Add QCS615 PCIe support
 2025-07-03  7:19 UTC  (5+ messages)
` [PATCH v7 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615
` [PATCH v7 2/3] arm64: dts: qcom: qcs615: enable pcie
` [PATCH v7 3/3] arm64: dts: qcom: qcs615-ride: Enable PCIe interface

[PATCH] Remove error prints for devm_add_action_or_reset()
 2025-07-02  7:53 UTC  (12+ messages)

[PATCH v2] dt-bindings: phy: Convert ti,da830-usb-phy to DT schema
 2025-07-01  8:26 UTC  (3+ messages)

[PATCH v8 0/4] PCI: rockchip: Improve driver quality
 2025-06-30 22:28 UTC  (8+ messages)
` [PATCH v8 1/4] PCI: rockchip: Use standard PCIe defines
` [PATCH v8 2/4] PCI: rockchip: Set Target Link Speed before retraining
` [PATCH v8 3/4] phy: rockchip-pcie: Enable all four lanes if required
` [PATCH v8 4/4] phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal

[PATCH v9 0/4] PCI: rockchip: Improve driver quality
 2025-06-30 21:56 UTC  (5+ messages)
` [PATCH v9 1/4] PCI: rockchip: Use standard PCIe defines
` [PATCH v9 2/4] PCI: rockchip: Set Target Link Speed before retraining
` [PATCH v9 3/4] phy: rockchip-pcie: Enable all four lanes if required
` [PATCH v9 4/4] phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal

[PATCH v2] dt-bindings: phy: Convert brcm,sr-usb-combo-phy to DT schema
 2025-06-30 19:06 UTC  (2+ messages)

[PATCH v7 0/4] PCI: rockchip: Improve driver quality
 2025-06-30 17:55 UTC  (9+ messages)
` [PATCH v7 1/4] PCI: rockchip: Use standard PCIe defines
` [PATCH v7 2/4] PCI: rockchip: Set Target Link Speed before retraining
` [PATCH v7 4/4] phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal
` [PATCH v7 3/4] phy: rockchip-pcie: Enable all four lanes if required

[PATCH v2] phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence
 2025-06-30 10:29 UTC  (2+ messages)

[PATCH v3 0/3] Add Equalization Settings for 8.0 GT/s and Add PCIe Lane Equalization Preset Properties for 8.0 GT/s and 16.0 GT/s
 2025-06-30  7:19 UTC  (4+ messages)
` [PATCH v3 1/3] PCI: qcom: Add equalization settings for 8.0 GT/s

[PATCH 0/5] phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant
 2025-06-27 19:17 UTC  (7+ messages)
` [PATCH 1/5] dt-bindings: soc: rockchip: add rk3588 csidphy grf syscon
` [PATCH 2/5] dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant

[PATCH v3 0/2 RESEND] phy: renesas: r8a779f0-ether-serdes: driver enhancement
 2025-06-27 18:48 UTC  (4+ messages)

[PATCH v3 0/4] pci: qcom: drop unrelated clock and add link_down reset for sa8775p
 2025-06-27 14:50 UTC  (8+ messages)
` [PATCH v3 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings
` [PATCH v3 2/4] dt-bindings: PCI: qcom,pcie-sa8775p: document link_down reset
` [PATCH v3 3/4] arm64: dts: qcom: sa8775p: remove aux clock from pcie phy

回覆: 回覆: [PATCH 5/7] ARM: dts: aspeed-g6: Add PCIe RC node
 2025-06-27 10:02 UTC  (3+ messages)
  `  "

[PATCH 0/7] Add ASPEED PCIe Root Complex support
 2025-06-27  9:59 UTC  (4+ messages)
` [PATCH 3/7] dt-bindings: pci: Add document for ASPEED PCIe RC
    ` 回覆: "

[PATCH v7 0/5] pci: qcom: Add QCS8300 PCIe support
 2025-06-27  9:31 UTC  (4+ messages)
` [PATCH v7 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300

[PATCH 0/2] dt-bindings: Drop 'db' suffix duplicating dtschema
 2025-06-27  9:31 UTC  (7+ messages)
` [PATCH 1/2] dt-bindings: leds: issi,is31fl319x: "
` [PATCH 2/2] dt-bindings: phy: fsl,imx8mq-usb: "

[PATCH v6 0/3] pci: qcom: Add QCS615 PCIe support
 2025-06-27  9:22 UTC  (3+ messages)
` [PATCH v6 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615

[PATCH v4 0/2] riscv: sophgo: add USB phy support for CV18XX series
 2025-06-27  6:30 UTC  (4+ messages)
` [PATCH v4 2/2] phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X

[PATCH] phy: qcom: qmp-combo: Add missing PLL (VCO) configuration on SM8750
 2025-06-27  0:47 UTC  (2+ messages)

[PATCH] phy: qcom: m31-eusb2: drop registration printk
 2025-06-27  0:47 UTC  (2+ messages)

[PATCH v2 0/2] Fix tuning on eUSB2 repeater
 2025-06-27  0:47 UTC  (4+ messages)
` [PATCH v2 1/2] dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values
` (subset) [PATCH v2 0/2] Fix tuning on eUSB2 repeater

[PATCH] phy: qcom: m31-eusb2: fix match data santity check
 2025-06-27  0:47 UTC  (2+ messages)

[PATCH v5 0/2] Update PCIe PHY settings for QCS8300 and SA8775P
 2025-06-27  0:47 UTC  (2+ messages)
` (subset) "

[PATCH v1 0/2] MediaTek TPHY Cleanups
 2025-06-27  0:47 UTC  (2+ messages)

[PATCH] dt-bindings: phy: apm,xgene-phy: Remove trailing whitespace
 2025-06-27  0:47 UTC  (2+ messages)

[PATCH v4 00/17] drm/bridge: cdns-dsi: Make it work a bit better
 2025-06-26 23:32 UTC  (5+ messages)
` [PATCH v4 04/17] phy: cdns-dphy: Store hs_clk_rate and return it
` [PATCH v4 05/17] phy: cdns-dphy: Remove leftover code

[PATCH v3 2/2 RESEND] phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
 2025-06-26  8:24 UTC 

[PATCH v3 1/2 RESEND] phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
 2025-06-26  8:24 UTC 

[PATCH 1/2] phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
 2025-06-26  8:19 UTC 

[PATCH 2/2] phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
 2025-06-26  8:19 UTC 

[PATCH V6 10/10] scsi: ufs: qcom : Refactor phy_power_on/off calls
 2025-06-26  7:25 UTC  (4+ messages)

[PATCH] phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence
 2025-06-26  4:13 UTC  (3+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox