messages from 2025-09-25 02:29:11 to 2025-10-03 10:04:13 UTC [more...]
[PATCH 00/18] Add USB2.0 support for RZ/G3E
2025-10-03 10:03 UTC (22+ messages)
` [PATCH 01/18] phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
` [PATCH 02/18] phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
` [PATCH 03/18] reset: rzv2h-usb2phy: Simplify pm_runtime driver handling
` [PATCH 04/18] reset: rzv2h-usb2phy: Set VBENCTL register for OTG mode
` [PATCH 05/18] dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
` [PATCH 06/18] phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
` [PATCH 07/18] regulator: devres: Disable exclusive regulator before releasing
` [PATCH 08/18] dt-bindings: clock: renesas,r9a09g047-cpg: Add USB2 PHY core clocks
` [PATCH 09/18] clk: renesas: r9a09g047: Add clock and reset entries for USB2
` [PATCH 10/18] dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
` [PATCH 11/18] dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
` [PATCH 12/18] dt-bindings: reset: Document RZ/G3E USB2PHY reset
` [PATCH 13/18] arm64: dts: renesas: r9a09g056: Add USB2.0 PHY VBUS internal regulator node
` [PATCH 14/18] arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable USB2 PHY0 VBUS support
` [PATCH 15/18] arm64: dts: renesas: r9a09g057: Add USB2.0 PHY VBUS internal regulator node
` [PATCH 16/18] arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable USB2 PHY0 VBUS support
` [PATCH 17/18] arm64: dts: renesas: r9a09g047: Add USB2.0 support
` [PATCH 18/18] arm64: dts: renesas: r9a09g047e57-smarc: Enable "
[PATCH 0/6] phy: phy-can-transceiver: Support TJA1048/TJA1051
2025-10-02 16:24 UTC (3+ messages)
` [PATCH 3/6] phy: phy-can-transceiver: Add dual channel support for TJA1048
[PATCH v3 phy 00/17] Lynx 28G improvements part 1
2025-10-02 11:32 UTC (26+ messages)
` [PATCH v3 phy 01/17] phy: lynx-28g: remove LYNX_28G_ prefix from register names
` [PATCH v3 phy 02/17] phy: lynx-28g: don't concatenate lynx_28g_lane_rmw() argument "reg" with "val" and "mask"
` [PATCH v3 phy 03/17] phy: lynx-28g: use FIELD_GET() and FIELD_PREP()
` [PATCH v3 phy 04/17] phy: lynx-28g: convert iowrite32() calls with magic values to macros
` [PATCH v3 phy 05/17] phy: lynx-28g: restructure protocol configuration register accesses
` [PATCH v3 phy 06/17] phy: lynx-28g: make lynx_28g_set_lane_mode() more systematic
` [PATCH v3 phy 07/17] phy: lynx-28g: refactor lane->interface to lane->mode
` [PATCH v3 phy 08/17] phy: lynx-28g: distinguish between 10GBASE-R and USXGMII
` [PATCH v3 phy 09/17] phy: lynx-28g: configure more equalization params for 1GbE and 10GbE
` [PATCH v3 phy 10/17] phy: lynx-28g: use "dev" argument more in lynx_28g_probe()
` [PATCH v3 phy 11/17] phy: lynx-28g: improve lynx_28g_probe() sequence
` [PATCH v3 phy 12/17] dt-bindings: phy: lynx-28g: add compatible strings per SerDes and instantiation
` [PATCH v3 phy 13/17] phy: lynx-28g: probe on per-SoC and per-instance compatible strings
` [PATCH v3 phy 14/17] phy: lynx-28g: add support for 25GBASER
` [PATCH v3 phy 15/17] phy: lynx-28g: use timeouts when waiting for lane halt and reset
` [PATCH v3 phy 16/17] phy: lynx-28g: truly power the lanes up or down
` [PATCH v3 phy 17/17] phy: lynx-28g: implement phy_exit() operation
[PATCH v3 0/3] arm64: dts: qcom: Add PCIe Support for sm8750
2025-10-02 9:49 UTC (5+ messages)
` [PATCH v3 2/3] arm64: dts: qcom: sm8750: Add PCIe PHY and controller node
[PATCH v5 0/7] SPMI: Implement sub-devices and migrate drivers
2025-10-02 9:36 UTC (8+ messages)
` [PATCH v5 1/7] spmi: Implement spmi_subdevice_alloc_and_add() and devm variant
` [PATCH v5 2/7] nvmem: qcom-spmi-sdam: Migrate to devm_spmi_subdevice_alloc_and_add()
` [PATCH v5 3/7] power: reset: qcom-pon: "
` [PATCH v5 4/7] phy: qualcomm: eusb2-repeater: "
` [PATCH v5 5/7] misc: qcom-coincell: "
` [PATCH v5 6/7] iio: adc: qcom-spmi-iadc: "
` [PATCH v5 7/7] iio: adc: qcom-spmi-iadc: Remove regmap R/W wrapper functions
[PATCH v4 00/10] Introduce Glymur USB support
2025-10-02 9:11 UTC (15+ messages)
` [PATCH v4 01/10] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Add Glymur compatible
` [PATCH v4 02/10] dt-bindings: phy: qcom,qmp-usb: Add Glymur USB UNI PHY compatible
` [PATCH v4 03/10] dt-bindings: phy: qcom-m31-eusb2: Add Glymur compatible
` [PATCH v4 04/10] dt-bindings: usb: qcom,snps-dwc3: "
` [PATCH v4 05/10] dt-bindings: phy: qcom,snps-eusb2-repeater: Add SMB2370 compatible
` [PATCH v4 06/10] phy: qualcomm: Update the QMP clamp register for V6
` [PATCH v4 07/10] phy: qualcomm: qmp-combo: Update QMP PHY with Glymur settings
` [PATCH v4 08/10] phy: qualcomm: qmp-usb: Add support for Glymur USB UNI PHY
` [PATCH v4 09/10] phy: qualcomm: m31-eusb2: Make clkref an optional resource
` [PATCH v4 10/10] phy: qualcomm: eusb2-repeater: Add SMB2370 eUSB2 repeater support
[PATCH] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: do not reference whole usb-switch.yaml
2025-10-02 7:26 UTC (6+ messages)
[PATCH v7 0/8] phy: phy-can-transceiver: Support TJA1048/TJA1051
2025-10-01 13:22 UTC (9+ messages)
` [PATCH v7 1/8] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA105X/1048
` [PATCH v7 2/8] phy: phy-can-transceiver: Introduce can_transceiver_priv
` [PATCH v7 3/8] phy: phy-can-transceiver: Add dual channel support for TJA1048
` [PATCH v7 4/8] phy: phy-can-transceiver: Drop the gpio desc check
` [PATCH v7 5/8] phy: phy-can-transceiver: Add support for TJA105{1,7}
` [PATCH v7 6/8] arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply
` [PATCH v7 7/8] arm64: dts: imx8mp-evk: "
` [PATCH v7 8/8] arm64: dts: imx93-11x11-evk: "
[PATCH v3 00/10] Introduce Glymur USB support
2025-10-01 9:41 UTC (19+ messages)
` [PATCH v3 01/10] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Add Glymur compatible
` [PATCH v3 04/10] dt-bindings: usb: qcom,snps-dwc3: "
` [PATCH v3 06/10] phy: qualcomm: Update the QMP clamp register for V6
` [PATCH v3 07/10] phy: qualcomm: qmp-combo: Update QMP PHY with Glymur settings
` [PATCH v3 08/10] phy: qualcomm: qmp-usb: Add support for Glymur USB UNI PHY
` [PATCH v3 09/10] phy: qualcomm: m31-eusb2: Make clkref an optional resource
` [PATCH v3 10/10] phy: qualcomm: eusb2-repeater: Add SMB2370 eUSB2 repeater support
[PATCH v3 00/20] BYEWORD_UPDATE: unifying (most) HIWORD_UPDATE macros
2025-10-01 9:38 UTC (3+ messages)
` [PATCH v3 04/20] media: synopsys: hdmirx: replace macros with bitfield variants
[PATCH v4 0/3] arm64: qcom: x1e78100-lenovo-thinkpad-t14s: add support for HDMI output
2025-10-01 7:06 UTC (8+ messages)
` [PATCH v4 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document lanes mapping when not using in USB-C complex
` [PATCH v4 2/3] phy: qcom: qmp-combo: get the USB3 & DisplayPort lanes mapping from DT
` [PATCH v4 3/3] arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes
[PATCH 0/6] Introduce SpacemiT K1 PCIe phy and host controller
2025-10-01 2:40 UTC (10+ messages)
` [PATCH 3/6] dt-bindings: phy: spacemit: introduce PCIe root complex
` [PATCH 5/6] PCI: spacemit: introduce SpacemiT PCIe host driver
[PATCH] dt-bindings: usb: switch: split out ports definition
2025-09-30 19:13 UTC (5+ messages)
[PATCH v5 0/3] Add driver support for Eswin EIC7700 SoC SATA Controller and PHY
2025-09-30 8:46 UTC (4+ messages)
` [PATCH v5 1/3] dt-bindings: ata: eswin: Document for EIC7700 SoC ahci
` [PATCH v5 2/3] dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHY
` [PATCH v5 3/3] phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver
[PATCH v8 0/6] initial usbdrd phy support for Exynosautov920 soc
2025-09-29 6:49 UTC (13+ messages)
` [PATCH v8 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible
` [PATCH v8 2/6] phy: exynos5-usbdrd: support HS phy for ExynosAutov920
` [PATCH v8 3/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo hsphy
` [PATCH v8 4/6] phy: exynos5-usbdrd: support HS combo phy for ExynosAutov920
` [PATCH v8 5/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy
` [PATCH v8 6/6] phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920
[PATCH 0/4] phy: qcom: Introduce USB support for Kaanapali
2025-09-29 6:02 UTC (4+ messages)
` [PATCH 2/4] dt-bindings: phy: qcom,m31-eusb2-phy: Document M31 eUSB2 PHY "
[PATCH v4 0/7] Add Type-C DP support for RK3399 EVB IND board
2025-09-29 3:55 UTC (14+ messages)
` [PATCH v4 1/7] usb: typec: Add default HPD device when register DisplayPort altmode
` [PATCH v4 5/7] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection
[PATCH v7 00/14] Add DisplayPort support for QCS615 platform
2025-09-27 12:25 UTC (17+ messages)
` [PATCH v7 01/14] dt-bindings: phy: Add QMP USB3+DP PHY for QCS615
` [PATCH v7 02/14] phy: qcom: qmp-usbc: Rename USB-specific ops to prepare for DP support
` [PATCH v7 03/14] phy: qcom: qmp-usbc: Add DP-related fields for USB/DP switchable PHY
` [PATCH v7 04/14] phy: qcom: qmp-usbc: Add regulator init_load support
` [PATCH v7 05/14] phy: qcom: qmp-usbc: Move reset config into PHY cfg
` [PATCH v7 06/14] phy: qcom: qmp-usbc: add DP link and vco_div clocks for DP PHY
` [PATCH v7 07/14] phy: qcom: qmp-usbc: Move USB-only init to usb_power_on
` [PATCH v7 08/14] phy: qcom: qmp-usbc: Add TCSR parsing and PHY mode setting
` [PATCH v7 09/14] phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs
` [PATCH v7 10/14] phy: qcom: qmp-usbc: Add USB/DP exclude handling
` [PATCH v7 11/14] phy: qcom: qmp: Add DP v2 PHY register definitions
` [PATCH v7 12/14] phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config and DP mode support
` [PATCH v7 13/14] drm/msm/dp: move link-specific parsing from dp_panel to dp_link
` [PATCH v7 14/14] drm/msm/dp: Add support for lane mapping configuration
[PATCH] phy: qcom: qmp-combo: Move pipe_clk on/off to common
2025-09-27 9:17 UTC
[PATCH 0/4] Add support for ExynosAutov920 PCIe PHY
2025-09-26 7:39 UTC (6+ messages)
` [PATCH 1/4] dt-bindings: soc: samsung: exynos-sysreg: add hsi0 for ExynosAutov920
` [PATCH 2/4] dt-bindings: phy: Add PCIe PHY support for ExynosAutov920 SoC
` [PATCH 3/4] arm64: dts: ExynosAutov920: add PCIe PHY DT nodes
` [PATCH 4/4] phy: exynos: Add PCIe PHY support for ExynosAutov920 SoC
[PATCH v3 00/10] Add ASPEED PCIe Root Complex support
2025-09-26 3:45 UTC (5+ messages)
` [PATCH v3 03/10] dt-bindings: PCI: Add ASPEED PCIe RC support
[PATCH v6 00/14] Add DisplayPort support for QCS615 platform
2025-09-26 3:16 UTC (20+ messages)
` [PATCH v6 01/14] dt-bindings: phy: Add QMP USB3+DP PHY for QCS615
` [PATCH v6 02/14] phy: qcom: qmp-usbc: Rename USB-specific ops to prepare for DP support
` [PATCH v6 03/14] phy: qcom: qmp-usbc: Add DP-related fields for USB/DP switchable PHY
` [PATCH v6 04/14] phy: qcom: qmp-usbc: Add regulator init_load support
` [PATCH v6 05/14] phy: qcom: qmp-usbc: Move reset config into PHY cfg
` [PATCH v6 06/14] phy: qcom: qmp-usbc: add DP link and vco_div clocks for DP PHY
` [PATCH v6 07/14] phy: qcom: qmp-usbc: Move USB-only init to usb_power_on
` [PATCH v6 08/14] phy: qcom: qmp-usbc: Add TCSR parsing and PHY mode setting
` [PATCH v6 09/14] phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs
` [PATCH v6 10/14] phy: qcom: qmp-usbc: Add USB/DP exclude handling
` [PATCH v6 11/14] phy: qcom: qmp: Add DP v2 PHY register definitions
` [PATCH v6 12/14] phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config and DP mode support
` [PATCH v6 13/14] drm/msm/dp: move link-specific parsing from dp_panel to dp_link
` [PATCH v6 14/14] drm/msm/dp: Add support for lane mapping configuration
[PATCH v3 00/31] media: add imx93 mipi/controller csi support
2025-09-25 16:08 UTC (3+ messages)
[PATCH v2 phy 00/16] Lynx 28G improvements part 1
2025-09-25 13:05 UTC (7+ messages)
` [PATCH v2 phy 12/16] dt-bindings: phy: lynx-28g: add compatible strings per SerDes and instantiation
[PATCH 0/2] Add UFS support for Kaanapali
2025-09-25 11:55 UTC (3+ messages)
` [PATCH 2/2] dt-bindings: phy: Add QMP UFS PHY compatible "
[PATCH v7 0/7] Add initial USB support for the Renesas RZ/G3S SoC
2025-09-25 10:34 UTC (10+ messages)
` [PATCH v7 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S
` [PATCH v7 2/7] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
` [PATCH v7 3/7] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
` [PATCH v7 4/7] reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
` [PATCH v7 5/7] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
` [PATCH v7 6/7] arm64: dts: renesas: r9a08g045: Add USB support
` [PATCH v7 7/7] arm64: dts: renesas: rzg3s-smarc: Enable "
[PATCH v2] phy: freescale: Initialize priv->lock
2025-09-25 3:58 UTC (2+ messages)
[PATCH v2 00/10] Introduce Glymur USB support
2025-09-25 2:58 UTC (5+ messages)
` [PATCH v2 02/10] dt-bindings: phy: qcom,qmp-usb: Add Glymur USB UNI PHY compatible
[PATCH 0/6] Add PCIe support for Kaanapali
2025-09-25 2:31 UTC (7+ messages)
` [PATCH 4/6] phy: qcom-qmp: pcs-pcie: Add v8 register offsets
` [PATCH 5/6] phy: qcom-qmp: qserdes-com: Add some more "
` [PATCH 6/6] phy: qcom: qmp-pcie: add QMP PCIe PHY tables for Kaanapali
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).