messages from 2026-01-13 08:02:37 to 2026-01-17 00:25:47 UTC [more...]
[PATCH 0/5] Fixes to Tegra USB role switching and Smaug USB role switching enablement
2026-01-17 0:25 UTC (26+ messages)
` [PATCH 2/5] phy: tegra: xusb: Fix USB2 port regulator disable logic
` [PATCH 3/5] phy: tegra: xusb: Fix ordering issue when switching roles on USB2 ports
` [PATCH 5/5] arm64: tegra: smaug: Add usb-role-switch support
` (subset) [PATCH 0/5] Fixes to Tegra USB role switching and Smaug USB role switching enablement
[PATCH v2 00/12] Add HDMI support for Mediatek Genio 510/700/1200-EVK and Radxa NIO-12L boards
2026-01-17 0:24 UTC (3+ messages)
` [PATCH v2 01/12] dt-bindings: phy: mediatek,hdmi-phy: Fix clock output names for MT8195
[PATCH v7 0/3] arm64: qcom: x1e78100-lenovo-thinkpad-t14s: add support for HDMI output
2026-01-16 21:39 UTC (2+ messages)
` (subset) "
[PATCH v5 0/8] arm64: dts: mediatek: Add Openwrt One AP functionality
2026-01-16 16:02 UTC (3+ messages)
` [PATCH v5 2/8] arm64: dts: mediatek: mt7981b: Add PCIe and USB support
[PATCH v3] phy: fsl-imx8mq-usb: add debugfs to access control register
2026-01-16 15:19 UTC (8+ messages)
[PATCH v3 0/4] PCI: qcom: Add support for Glymur PCIe Gen5x4
2026-01-16 13:25 UTC (2+ messages)
` (subset) "
[PATCH v3] phy: fsl-imx8mq-usb: enable RX Termination override
2026-01-16 10:18 UTC
[PATCH v2] phy: fsl-imx8mq-usb: enable RxTermination_override_sel
2026-01-16 10:07 UTC (3+ messages)
[PATCH v7 0/2] Add driver support for Eswin EIC7700 SoC SATA PHY
2026-01-16 8:50 UTC (4+ messages)
` [PATCH v7 2/2] phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver
` "
[PATCH] drm/msm/dp: Correct LeMans/Monaco DP phy Swing/Emphasis setting
2026-01-16 8:41 UTC (8+ messages)
[PATCH v3 net-next 00/10] PHY polarity inversion via generic device tree properties
2026-01-16 3:19 UTC (12+ messages)
` [PATCH v3 net-next 05/10] phy: add phy_get_rx_polarity() and phy_get_tx_polarity()
` (subset) [PATCH v3 net-next 00/10] PHY polarity inversion via generic device tree properties
[PATCH RFC net-next 00/14] net: stmmac: SerDes, PCS, BASE-X, and inband goodies
2026-01-16 2:58 UTC (26+ messages)
` [PATCH net-next 01/14] net: stmmac: qcom-ethqos: remove mac_base
` [PATCH net-next 02/14] net: stmmac: qcom-ethqos: convert to set_clk_tx_rate() method
` [PATCH net-next 03/14] phy: qcom-sgmii-eth: add .set_mode() and .validate() methods
` [PATCH net-next 04/14] net: stmmac: wrap phylink's rx_clk_stop functions
` [PATCH net-next 05/14] net: stmmac: add stmmac core serdes support
` [net-next,05/14] "
` [PATCH net-next 06/14] net: stmmac: qcom-ethqos: convert to dwmac generic SerDes support
` [PATCH net-next 07/14] net: stmmac: move most PCS register definitions to stmmac_pcs.c
` [PATCH net-next 08/14] net: stmmac: handle integrated PCS phy_intf_sel separately
` [PATCH net-next 09/14] net: stmmac: add BASE-X support to integrated PCS
` [PATCH net-next 10/14] net: stmmac: use integrated PCS for BASE-X modes
` [PATCH net-next 11/14] net: stmmac: add struct stmmac_pcs_info
` [PATCH net-next 12/14] net: stmmac: add support for reading inband SGMII status
` [net-next,12/14] "
` [PATCH net-next 13/14] net: stmmac: configure SGMII AN control according to phylink
` [PATCH net-next 14/14] net: stmmac: report PCS configuration changes
[PATCH v2 0/3] Add AST2700 USB3.2 PHY driver
2026-01-16 2:53 UTC (4+ messages)
` [PATCH v2 1/3] dt-bindings: phy: aspeed: Document AST2700 USB3.0 PHY
` [PATCH v2 2/3] phy: add AST2700 usb3.2 phy driver
` [PATCH v2 3/3] MAINTAINERS: Add ASPEED USB3 PHY driver
[PATCH v8 00/10] SPMI: Implement sub-devices and migrate drivers
2026-01-16 2:08 UTC (17+ messages)
` [PATCH v8 01/10] spmi: Remove redundant dev_name() print in spmi_device_add()
` [PATCH v8 02/10] spmi: Print error status with %pe format
` [PATCH v8 03/10] spmi: Remove unneeded goto in spmi_device_add() error path
` [PATCH v8 04/10] spmi: Implement spmi_subdevice_alloc_and_add() and devm variant
` [PATCH v8 05/10] nvmem: qcom-spmi-sdam: Migrate to devm_spmi_subdevice_alloc_and_add()
` [PATCH v8 06/10] power: reset: qcom-pon: "
` [PATCH v8 07/10] phy: qualcomm: eusb2-repeater: "
` [PATCH v8 08/10] misc: qcom-coincell: "
` [PATCH v8 09/10] iio: adc: qcom-spmi-iadc: "
` [PATCH v8 10/10] iio: adc: qcom-spmi-iadc: Remove regmap R/W wrapper functions
[PATCH 2/4] phy: axiado: add Axiado eMMC PHY driver
2026-01-15 22:22 UTC (2+ messages)
[PATCH 00/27] clk: remove deprecated API divider_round_rate() and friends
2026-01-15 21:05 UTC (5+ messages)
` [PATCH 25/27] phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
[PATCH v2 0/4] Add USB support for Canaan K230
2026-01-15 20:03 UTC (10+ messages)
` [PATCH v2 1/4] dt-bindings: phy: Add Canaan K230 USB PHY
` [PATCH v2 2/4] dt-bindings: usb: dwc2: Add support for Canaan K230 SoC
` [PATCH v2 3/4] phy: usb: Add driver for Canaan K230 USB 2.0 PHY
` [PATCH v2 4/4] riscv: dts: canaan: Add syscon and USB nodes for K230
[PATCH phy 0/8] Lynx 28G improvements part 2
2026-01-15 19:52 UTC (10+ messages)
` [PATCH phy 1/8] phy: lynx-28g: skip CDR lock workaround for lanes disabled in the device tree
` [PATCH phy 2/8] dt-bindings: phy: lynx-28g: add compatible strings per SerDes and instantiation
` [PATCH phy 3/8] dt-bindings: phy: lynx-28g: add constraint on LX2162A lane indices
` [PATCH phy 4/8] phy: lynx-28g: probe on per-SoC and per-instance compatible strings
` [PATCH phy 5/8] phy: lynx-28g: add support for 25GBASER
` [PATCH phy 6/8] phy: lynx-28g: use timeouts when waiting for lane halt and reset
` [PATCH phy 7/8] phy: lynx-28g: truly power the lanes up or down
` [PATCH phy 8/8] phy: lynx-28g: implement phy_exit() operation
[PATCH v2 0/2] dt-bindings: phy: Convert TI OMAP control and PIPE3 PHY to DT schema
2026-01-15 14:51 UTC (8+ messages)
` [PATCH v2 1/2] dt-bindings: phy: ti,phy-usb3: convert "
` [PATCH v2 2/2] dt-bindings: phy: ti,control-phy-otghs: "
[PATCH 0/3] Add AST2700 USB3.2 PHY driver
2026-01-15 10:03 UTC (8+ messages)
` [PATCH 1/3] dt-bindings: phy: aspeed: Document AST2700 USB3.0 PHY
` [PATCH 2/3] phy: add AST2700 usb3.2 phy driver
` [PATCH 3/3] MAINTAINERS: Add ASPEED USB3 PHY driver
[PATCH v9 0/3] Add ASPEED PCIe PHY support
2026-01-15 3:35 UTC (4+ messages)
` [PATCH v9 1/3] dt-bindings: phy: aspeed: Add ASPEED PCIe PHY
` [PATCH v9 2/3] phy: aspeed: Add ASPEED PCIe PHY driver
` [PATCH v9 3/3] MAINTAINERS: "
[PATCH 0/5] PCI: qcom: Add link retention support
2026-01-15 2:16 UTC (7+ messages)
` [PATCH 1/5] phy: qcom: qmp-pcie: Skip PHY reset if already up
[PATCH] phy: freescale: imx8qm-hsio: fix NULL pointer dereference
2026-01-15 1:52 UTC (2+ messages)
[PATCH 0/5] Add calibration for Synopsys PCIe PHY and Controller
2026-01-15 0:41 UTC (8+ messages)
` [PATCH 1/5] PCI: dw-rockchip: Add phy_calibrate() to check PHY lock status
` [PATCH 3/5] phy: rockchip-snps-pcie3: Increase sram init timeout
[PATCH v10 0/2] Add Google Tensor SoC USB PHY support
2026-01-14 16:52 UTC (2+ messages)
[PATCH] phy: socionext: usb2: Simplify with scoped for each OF child loop
2026-01-14 16:51 UTC (2+ messages)
[PATCH next] phy: apple: atc: Reset USB2 PHY during probe as well
2026-01-14 16:51 UTC (2+ messages)
[PATCH next v2] phy: apple: atc: Actually check return value of devm_apple_tunable_parse
2026-01-14 16:51 UTC (2+ messages)
[PATCH] phy: freescale: imx8m-pcie: assert phy reset during power on
2026-01-14 16:51 UTC (2+ messages)
[PATCH] phy: sun4i-usb: replace use of system_wq with system_percpu_wq
2026-01-14 14:15 UTC (4+ messages)
[PATCH V4 0/4] Add UFS support for x1e80100 SoC
2026-01-14 14:01 UTC (2+ messages)
` (subset) "
[PATCH v3 0/2] phy: qcom: Introduce USB support for Kaanapali
2026-01-14 14:01 UTC (2+ messages)
[PATCH v3 0/2] Cadence: Torrent: Enable PCIe + XAUI multilink configuration
2026-01-14 14:01 UTC (2+ messages)
[PATCH] phy: qcom: qmp-combo: Add polarity inversion support for SAR2130P
2026-01-14 14:01 UTC (2+ messages)
[PATCH v2 0/6] Enable UFS support on Milos
2026-01-14 14:01 UTC (4+ messages)
` [PATCH v2 4/6] phy: qcom-qmp-ufs: Add Milos support
` (subset) [PATCH v2 0/6] Enable UFS support on Milos
[PATCH v2] phy: qcom: edp: Fix NULL pointer dereference for phy v6 (x1e80100)
2026-01-14 14:01 UTC (3+ messages)
[PATCH v2] phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe()
2026-01-14 14:01 UTC (3+ messages)
[PATCH v4 0/7] mmc: host: renesas_sdhi_core: support configuring an optional sdio mux
2026-01-14 11:52 UTC (5+ messages)
` [PATCH v4 5/7] i2c: omap: switch to new generic helper for getting selected mux-state
` [PATCH v4 7/7] mmc: host: renesas_sdhi_core: support selecting an optional mux
[PATCH 00/11] Describe PCIe/USB3.0 clock generator on R-Car Gen3
2026-01-14 10:22 UTC (4+ messages)
` [PATCH 01/11] dt-bindings: phy: renesas: usb3-phy: add r8a77990 support
[PATCH RESEND v7 00/10] SPMI: Implement sub-devices and migrate drivers
2026-01-14 10:09 UTC (31+ messages)
` [PATCH v7 01/10] spmi: Print error status with %pe format
` [PATCH v7 02/10] spmi: Remove redundant dev_name() print in spmi_device_add()
` [PATCH v7 03/10] spmi: Remove unneeded goto in spmi_device_add() error path
` [PATCH v7 04/10] spmi: Implement spmi_subdevice_alloc_and_add() and devm variant
` [PATCH v7 05/10] nvmem: qcom-spmi-sdam: Migrate to devm_spmi_subdevice_alloc_and_add()
` [PATCH v7 06/10] power: reset: qcom-pon: "
` [PATCH v7 07/10] phy: qualcomm: eusb2-repeater: "
` [PATCH v7 08/10] misc: qcom-coincell: "
` [PATCH v7 09/10] iio: adc: qcom-spmi-iadc: "
` [PATCH v7 10/10] iio: adc: qcom-spmi-iadc: Remove regmap R/W wrapper functions
[PATCH v6 00/11] Add HDMI 2.1 FRL support to phy-rockchip-samsung-hdptx
2026-01-13 8:13 UTC (7+ messages)
` [PATCH v6 02/11] phy: rockchip: samsung-hdptx: Use usleep_range() instead of udelay()
` [PATCH v6 03/11] phy: rockchip: samsung-hdptx: Fix coding style alignment
` [PATCH v6 04/11] phy: rockchip: samsung-hdptx: Consistently use [rk_]hdptx_[tmds_] prefixes
[PATCH] phy: qcom: edp: Fix NULL pointer dereference for phy v6 (x1e80100)
2026-01-13 8:10 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox