messages from 2026-08-06 16:26:09 to 2026-08-10 15:42:39 UTC [more...]
[PATCH 00/10] ARM: qcom: msm8974: enable HSIC controller
2026-08-10 15:42 UTC (11+ messages)
` [PATCH 01/10] dt-bindings: pinctrl: qcom,tlmm-common: allow functions on the HSIC pins
` [PATCH 02/10] dt-bindings: usb: ci-hdrc-usb2: allow the HSIC PHY as the ULPI child
` [PATCH 03/10] phy: qcom-usb-hsic: do not run the sleep calibration clock
` [PATCH 04/10] phy: qcom-usb-hsic: engage HSIC mode from phy_calibrate()
` [PATCH 05/10] usb: chipidea: msm: support the HSIC asynchronous wakeup interrupt
` [PATCH 06/10] usb: chipidea: msm: keep the glue device runtime-active
` [PATCH 07/10] usb: chipidea: msm: do not force the TX FIFO idle on HSIC instances
` [PATCH 08/10] usb: chipidea: host: calibrate the PHY after starting the host
` [PATCH 09/10] ARM: dts: qcom: msm8974: add the HSIC USB controller
` [PATCH 10/10] ARM: dts: qcom: apq8074-dragonboard: enable the HSIC host
[PATCH v10 00/12] ZTE zx297520v3 clock bindings and driver
2026-08-10 15:38 UTC (26+ messages)
` [PATCH v10 01/12] dt-bindings: clk: zte: Add zx297520v3 top clock and reset controller
` [PATCH v10 02/12] dt-bindings: clk: zte: Add zx297520v3 matrix "
` [PATCH v10 03/12] dt-bindings: clk: zte: Add zx297520v3 LSP "
` [PATCH v10 04/12] mfd: zx297520v3: Add a clock and reset MFD driver
` [PATCH v10 05/12] clk: zte: Add Clock registration infrastructure
` [PATCH v10 06/12] clk: zte: Add regmap-based clocks
` [PATCH v10 07/12] clk: zte: Add zx PLL support infrastructure
` [PATCH v10 08/12] clk: zte: Introduce a driver for zx297520v3 top clocks
` [PATCH v10 09/12] clk: zte: Introduce a driver for zx297520v3 matrix clocks
` [PATCH v10 10/12] clk: zte: Introduce a driver for zx297520v3 LSP clocks
` [PATCH v10 11/12] reset: zte: Add a zx297520v3 reset driver
` [PATCH v10 12/12] ARM: dts: zte: Declare zx297520v3 CRM device nodes
[PATCH 0/2] Add support for SA8255P in the phy-qcom-snps-femto-v2 phy driver
2026-08-10 14:59 UTC (4+ messages)
` [PATCH 1/2] dt-bindings: phy: Add sa8255p high-speed USB PHY
[PATCH v2 00/17] drm/spacemit: add SpacemiT K3 display support
2026-08-10 14:33 UTC (28+ messages)
` [PATCH v2 01/17] dt-bindings: display: spacemit: add K3 Saturn DPU controller
` [PATCH v2 02/17] dt-bindings: phy: add SpacemiT K3 Innosilicon DP PHY
` [PATCH v2 03/17] dt-bindings: display: spacemit: add K3 Innosilicon DP/eDP controller
` [PATCH v2 04/17] dt-bindings: soc: spacemit: allow eDP/DP PHY PLL pixel clocks on K3 APMU
` [PATCH v2 05/17] phy: spacemit: add Innosilicon DP TX PHY driver
` [PATCH v2 06/17] clk: spacemit: k3: parent eDP/DP pixel clock to the PHY PLL
` [PATCH v2 07/17] drm/spacemit: add Saturn DPU register model
` [PATCH v2 08/17] drm/spacemit: add Saturn DPU core types, cmdlist and display MMU
` [PATCH v2 09/17] drm/spacemit: add Saturn DPU hardware backend
` [PATCH v2 10/17] drm/spacemit: add Saturn DPU KMS pipeline
` [PATCH v2 11/17] drm/spacemit: add Saturn DPU DRM device driver
` [PATCH v2 12/17] drm/spacemit: add Innosilicon DP/eDP controller bridge driver
` [PATCH v2 13/17] MAINTAINERS: add SpacemiT K3 display driver entry
` [PATCH v2 14/17] riscv: dts: spacemit: k3: add display nodes
` [PATCH v2 15/17] riscv: dts: spacemit: k3-pico-itx: enable the DisplayPort output
` [PATCH v2 16/17] riscv: dts: spacemit: k3-com260-ifx: "
` [PATCH v2 17/17] riscv: defconfig: spacemit: k3: enable display driver
[PATCH 00/10] ARM: qcom: enable USB3 (DWC3) controller on MSM8974 platform
2026-08-10 13:05 UTC (19+ messages)
` [PATCH 01/10] dt-bindings: usb: qcom,snps-dwc3: document the MSM8974 controller
` [PATCH 02/10] dt-bindings: phy: qcom,ipq806x-usb-phy-hs: document the MSM8974 HS PHY
` [PATCH 03/10] dt-bindings: phy: qcom,ipq806x-usb-phy-ss: add MSM8974 SS PHY
` [PATCH 04/10] phy: qcom-ipq806x-usb: add MSM8974 HS PHY support
` [PATCH 05/10] phy: qcom-ipq806x-usb: fix the SS PHY TEST_POWERDOWN bit
` [PATCH 06/10] phy: qcom-ipq806x-usb: fix the PHY_PARAM_CTRL1 field masks
` [PATCH 07/10] phy: qcom-ipq806x-usb: parse the tx-deamp-3_5db property as documented
` [PATCH 08/10] phy: qcom-ipq806x-usb: support the MSM8974 SS PHY parameters
` [PATCH 09/10] ARM: dts: qcom: msm8974: add the USB3 controller and its PHYs
` [PATCH 10/10] ARM: dts: qcom: apq8074-dragonboard: enable the USB3 host
[PATCH v5] phy: renesas: rcar-gen3-usb2: Avoid long delay in atomic context
2026-08-10 13:01 UTC (2+ messages)
[PATCH v2 0/4] phy: rockchip-samsung-dcphy: support the D-PHY receiver direction
2026-08-10 12:39 UTC (14+ messages)
` [PATCH v2 1/4] dt-bindings: phy: rockchip,rk3588-mipi-dcphy: support per-direction phys
` [PATCH v2 3/4] phy: rockchip-samsung-dcphy: model TX and RX as separate PHYs
` [PATCH v2 2/4] phy: rockchip-samsung-dcphy: factor MIPI D-PHY power on/off into helpers
[PATCH 00/25] ARM: rockchip: Add peripheral support for RV1106
2026-08-10 12:10 UTC (3+ messages)
` [PATCH 07/25] dt-bindings: phy: rockchip,inno-usb2phy: Add RV1106 compatible
` [PATCH 08/25] phy: rockchip: inno-usb2: Add support for RV1106
[PATCH v3 0/5] phy: rockchip-samsung-dcphy: add the MIPI D-PHY receiver
2026-08-10 12:10 UTC (6+ messages)
` [PATCH v3 1/5] dt-bindings: phy: Add PHY_TYPE_DSI and PHY_TYPE_CSI definitions
` [PATCH v3 2/5] dt-bindings: phy: rockchip,rk3588-mipi-dcphy: allow DSI and CSI consumers
` [PATCH v3 3/5] phy: rockchip-samsung-dcphy: factor MIPI D-PHY power on/off into helpers
` [PATCH v3 4/5] phy: rockchip-samsung-dcphy: model TX and RX as separate PHYs
` [PATCH v3 5/5] phy: rockchip-samsung-dcphy: add MIPI D-PHY receiver support
[PATCH v1 0/4] Add qref and refgen regulator support for QCS8300 and SA8775p PCIe PHYs
2026-08-10 11:40 UTC (8+ messages)
` [PATCH v1 1/4] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add vdda-refgen and refgen supply properties
` [PATCH v1 2/4] phy: qcom: qmp-pcie: Add qref and refgen regulator vote for QCS8300 and SA8775p PHY
` [PATCH v1 3/4] arm64: dts: qcom: qcs8300: Add qref and refgen supply for PCIe PHYs
` [PATCH v1 4/4] arm64: dts: qcom: sa8775p: "
[PATCH v2 0/6] Fix regulator voting for the Qualcomm SGMII SerDes PHY
2026-08-10 11:16 UTC (15+ messages)
` [PATCH v2 1/6] dt-bindings: phy: qcom,sa8775p-dwmac-sgmii-phy: add named voltage rails and deprecate phy-supply
` [PATCH v2 2/6] phy: qcom: sgmii-eth: vote for both voltage rails with correct current loads
` [PATCH v2 3/6] arm64: dts: qcom: lemans-evk: fix SerDes PHY regulator supplies
` [PATCH v2 4/6] arm64: dts: qcom: lemans-ride-common: "
` [PATCH v2 5/6] arm64: dts: qcom: monaco-evk: "
` [PATCH v2 6/6] arm64: dts: qcom: qcs8300-ride: "
` (subset) [PATCH v2 0/6] Fix regulator voting for the Qualcomm SGMII SerDes PHY
[PATCH v2 0/2] phy: ti: ti-pipe3: allow configuring ACSPCIe TX/RX mode
2026-08-10 7:48 UTC (4+ messages)
` [PATCH v2 2/2] "
[PATCH] phy: renesas: rcar-gen3-usb2: Ignore missing VBUS regulator
2026-08-10 6:22 UTC (2+ messages)
[PATCH RESEND 00/17] drm/spacemit: add SpacemiT K3 display support
2026-08-09 3:26 UTC (35+ messages)
` [PATCH RESEND 01/17] dt-bindings: display: spacemit: add K3 Saturn DPU controller
` [PATCH RESEND 02/17] dt-bindings: phy: add SpacemiT K3 Innosilicon DP PHY
` [PATCH RESEND 03/17] dt-bindings: display: spacemit: add K3 Innosilicon DP/eDP controller
` [PATCH RESEND 04/17] dt-bindings: soc: spacemit: allow eDP/DP PHY PLL pixel clocks on K3 APMU
` [PATCH RESEND 05/17] phy: spacemit: add Innosilicon DP TX PHY driver
` [PATCH RESEND 08/17] drm/spacemit: add Saturn DPU core types, cmdlist and display MMU
` [PATCH RESEND 10/17] drm/spacemit: add Saturn DPU KMS pipeline
` [PATCH RESEND 12/17] drm/spacemit: add Innosilicon DP/eDP controller bridge driver
[PATCH 00/17] drm/spacemit: add SpacemiT K3 display support
2026-08-09 1:01 UTC (9+ messages)
` [PATCH 05/17] phy: spacemit: add Innosilicon DP TX PHY driver
` [PATCH 09/17] drm/spacemit: add Saturn DPU hardware backend
` [PATCH 11/17] drm/spacemit: add Saturn DPU DRM device driver
glymur eDP PHY (v8): link trains only at HBR3, all lower rates fail
2026-08-08 17:13 UTC
phy-qcom-qmp-combo: com_aux enable fails on a DP-only instance with no USB half (Snapdragon X2 Elite / glymur)
2026-08-08 16:41 UTC
[PATCH v13 00/35] phy: rockchip: usbdp: Clean up the mess
2026-08-08 9:45 UTC (2+ messages)
[PATCH v2 0/2] SM8450 QoL changes (qmp)
2026-08-08 0:09 UTC (3+ messages)
` [PATCH v2 2/2] phy: qcom: qmp-combo: Drop qmp_v4_calibrate_dp_phy
[PATCH] phy: zynqmp: register PHY provider after probe initialization
2026-08-07 16:31 UTC (2+ messages)
[PATCH v5 00/10] phy: rockchip: samsung-hdptx: Clock fixes and API transition cleanups
2026-08-07 14:22 UTC (23+ messages)
` [PATCH v5 01/10] phy: rockchip: samsung-hdptx: Fix rate recalculation for high bpc
` [PATCH v5 02/10] phy: rockchip: samsung-hdptx: Prevent divide-by-zero when computing clk rate
` [PATCH v5 03/10] phy: rockchip: samsung-hdptx: Guard against clk rate integer underflow
` [PATCH v5 04/10] phy: rockchip: samsung-hdptx: Fix rate recalculation for 3.2GHz FRL
` [PATCH v5 05/10] phy: rockchip: samsung-hdptx: Handle uncommitted PHY config changes
` [PATCH v5 06/10] phy: rockchip: samsung-hdptx: Drop TMDS rate setup workaround
` [PATCH v5 07/10] phy: rockchip: samsung-hdptx: Consolidate consumer_put on error path
` [PATCH v5 08/10] phy: rockchip: samsung-hdptx: Drop restrict_rate_change handling
` [PATCH v5 09/10] phy: rockchip: samsung-hdptx: Simplify GRF access with FIELD_PREP_WM16()
` [PATCH v5 10/10] phy: rockchip: samsung-hdptx: Consistently use bitfield macros
[PATCH v2 0/2] phy: sunplus: fix two issues in update_disc_vol()
2026-08-07 13:38 UTC (5+ messages)
` [PATCH v2 1/2] phy: sunplus: fix memory leak "
` [PATCH v2 2/2] phy: sunplus: fix ERR_PTR deref "
[PATCH v2 0/3] Initial PCIe0 PHY support for SM8475
2026-08-07 13:23 UTC (5+ messages)
[PATCH v3 0/5] USB4 mode programming for QMMPHY on X1E
2026-08-07 12:49 UTC (9+ messages)
` [PATCH v3 1/5] dt-bindings: phy: qcom,qmp-usb3-dp: Extend X1E description for USB4
` [PATCH v3 2/5] phy: core: Define TBT phy_mode
` [PATCH v3 3/5] phy: qualcomm: qmp-combo: Add preliminary USB4 support
` [PATCH v3 4/5] phy: qualcomm: qmp-combo: Add USB4/TBT3 configuration data for Hamoa
[PATCH v6 0/7] phy: qcom: Fix possible NULL-deref and runtime PM race conditions
2026-08-07 12:34 UTC (2+ messages)
[PATCH] phy: qcom-qmp: qserdes-com: drop duplicate v8 DP headers
2026-08-07 12:33 UTC (2+ messages)
[PATCH v6 0/2] Add Hawi UFS PHY and Controller support
2026-08-07 12:33 UTC (4+ messages)
` [PATCH v6 2/2] phy: qcom-qmp-ufs: Add UFS PHY support on Hawi
[PATCH v5 0/2] Add Hawi UFS PHY and Controller support
2026-08-07 12:33 UTC (2+ messages)
[PATCH v3 0/3] Add Hawi UFS PHY and Controller support
2026-08-07 12:33 UTC (2+ messages)
[PATCH v3 0/2] PHY: Add MediaTek PCI-Express Gen4 S-PHY Driver
2026-08-07 10:17 UTC (5+ messages)
` [PATCH v3 1/2] dt-bindings: phy: Document MT8196 MediaTek PCI-Express Gen4 S-PHY
` [PATCH v3 2/2] phy: mediatek: Add support for "
[PATCH v9 0/6] Add QMP PCIe Multi-PHY support
2026-08-07 10:00 UTC (8+ messages)
` [PATCH v9 1/6] dt-bindings: phy: qcom: Add Glymur QMP PCIe multiple link-mode PHY
` [PATCH v9 2/6] phy: qcom: qmp-pcie: Add QMP PCIe Multi-PHY driver
` [PATCH v9 3/6] arm64: dts: qcom: glymur: Add PCIe3 PHY and PCIe3a controller nodes
` [PATCH v9 4/6] arm64: dts: qcom: glymur-crd: Add PHY supplies for pcie3_phy
` [PATCH v9 5/6] arm64: dts: qcom: mahua: Replace pcie3a/pcie3_phy with dedicated pcie3b_phy
` [PATCH v9 6/6] arm64: dts: qcom: mahua-crd: Add PHY supplies for pcie3b_phy
[PATCH 0/3] arm64: dts: imx95-15x15-frdm: support CAN transceivers sharing a silent GPIO
2026-08-06 20:07 UTC (3+ messages)
` (subset) "
[PATCH v8 00/12] ZTE zx297520v3 clock bindings and driver
2026-08-06 18:33 UTC (4+ messages)
` [PATCH v8 04/12] mfd: zx297520v3: Add a clock and reset MFD driver
[PATCH v6 0/7] drm/bridge: Implement generic USB Type-C DP HPD bridge
2026-08-06 18:01 UTC (7+ messages)
` [PATCH v6 1/7] drm/bridge: aux-hpd-bridge: Add drm_dev_has_dp_hpd_bridge()
` [PATCH v6 2/7] drm/bridge: Implement generic USB Type-C DP HPD bridge
` [PATCH v6 3/7] drm/display: Add soft depend for aux-hpd-typec-dp-bridge module
[PATCH] phy: freescale: fsl-samsung-hdmi: Balance runtime PM operations
2026-08-06 16:26 UTC (2+ messages)
[PATCH v4 0/2] phy: rockchip: inno-hdmi: Change TMDS rate handling to configure() ops
2026-08-06 16:26 UTC (2+ messages)
[PATCH v4 0/3] phy: rockchip: inno-csidphy: fix 2500 Mbps support and add clock lane phase tuning
2026-08-06 16:26 UTC (2+ messages)
[PATCH] phy: sunplus: fix error handling in sp_uphy_init()
2026-08-06 16:26 UTC (2+ messages)
[PATCH] phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure
2026-08-06 16:26 UTC (2+ messages)
[PATCH v8 0/6] phy: fsl-imx8mq-usb: few improvements
2026-08-06 16:26 UTC (2+ messages)
[PATCH RESEND v3 0/2] Initial QMP USB PHY support for SM8475
2026-08-06 16:26 UTC (2+ messages)
[PATCH v6 00/10] Add RZ/G3L USB2.0 host support
2026-08-06 16:26 UTC (2+ messages)
` (subset) "
[PATCH v4 0/4] phy: qcom: Introduce USB support for Hawi
2026-08-06 16:26 UTC (2+ messages)
` (subset) "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox