messages from 2026-08-24 06:38:17 to 2026-08-28 12:12:45 UTC [more...]
[PATCH v3 0/4] phy: qualcomm: qmp-combo: update DP PHY PLL programming on Glymur
2026-08-28 12:12 UTC (15+ messages)
` [PATCH v3 1/4] phy: qualcomm: qmp-combo: Add DP COM v8 header and fix register layout
` [PATCH v3 2/4] phy: qualcomm: qmp-combo: Update DP PHY common init tables
` [PATCH v3 3/4] phy: qualcomm: qmp-combo: Update link rate specific DP PHY tables
` [PATCH v3 4/4] phy: qualcomm: qmp-combo: Rework DP PHY runtime configuration
[PATCH v3 00/12] Enable USB3 for Qualcomm IPQ5018
2026-08-28 10:51 UTC (16+ messages)
` [PATCH v3 01/12] dt-bindings: phy: qcom,ipq5332-uniphy-pcie: Change to PCIe/USB3 combo PHY
` [PATCH v3 02/12] dt-bindings: phy: qcom,ipq5332-uniphy-pcie-usb3: Document the IPQ5018 USB3 PHY
` [PATCH v3 03/12] phy: qualcomm: qcom-uniphy-pcie-28lp: Convert to PCIe/USB3 combo PHY driver
` [PATCH v3 04/12] phy: qualcomm: qcom-uniphy-pcie-usb3-28lp: Refactor init regs table definitions
` [PATCH v3 05/12] phy: qualcomm: qcom-uniphy-pcie-usb3-28lp: Use bulk reset_control API
` [PATCH v3 06/12] phy: qualcomm: qcom-uniphy-pcie-usb3-28lp: Improve error handling in power_on
` [PATCH v3 07/12] phy: qualcomm: qcom-uniphy-pcie-usb3-28lp: Add support for USB3 PHY on IPQ5018
` [PATCH v3 08/12] arm64: dts: qcom: ipq5018: Add USB Super-Speed PHY node
` [PATCH v3 09/12] dt-bindings: usb: qcom,snps-dwc3: Add clocks for USB3 on Qualcomm IPQ5018
` [PATCH v3 10/12] arm64: dts: qcom: ipq5018: Add clocks required for USB3 support
` [PATCH v3 11/12] arm64: dts: qcom: ipq5018: Add Super-Speed UNIPHY to USB node
` [PATCH v3 12/12] arm64: dts: qcom: ipq5018: Enable USB Super-Speed PHY
[PATCH 0/5] Add support for USB phys in IPQ9650
2026-08-28 9:36 UTC (12+ messages)
` [PATCH 1/5] dt-bindings: phy: qcom,qmp-usb: Add IPQ9650 USB3 PHY
` [PATCH 2/5] dt-bindings: phy: qcom,usb-snps-femto-v2: Add IPQ9650 compatible
` [PATCH 4/5] phy: qcom: snps-femto-v2: Move PHY init registers to config tables
` [PATCH 5/5] phy: qcom: snps-femto-v2: Add IPQ9650 support
[PATCH v4 0/7] phy: rockchip-samsung-dcphy: Add the MIPI D-PHY receiver
2026-08-28 9:35 UTC (6+ messages)
` [PATCH v4 1/7] dt-bindings: phy: Add PHY_TYPE_DSI and PHY_TYPE_CSI definitions
` [PATCH v4 2/7] dt-bindings: phy: rockchip,rk3588-mipi-dcphy: Allow DSI and CSI consumers
[RFC PATCH] phy: qcom: ipq4019-usb: Propagate reset operation failures
2026-08-28 9:30 UTC (2+ messages)
[PATCH v3 0/9] arm64: dts: phy: st: usb: Add STM32MP2 USB support
2026-08-28 9:15 UTC (30+ messages)
` [PATCH v3 1/9] dt-bindings: phy: Document ST STM32MP25 USB2-FEMTO PHY
` [PATCH v3 2/9] phy: stm32: Add support for "
` [PATCH v3 3/9] dt-bindings: usb: generic-ehci: Document access-controllers property
` [PATCH v3 5/9] dt-bindings: usb: dwc3: Document ST STM32MP2 DWC3 xHCI USB controller
` [PATCH v3 7/9] dt-bindings: arm: stm32: Switch st,stm32mp23/25-syscfg into simple-mfd
` [PATCH v3 8/9] arm64: dts: st: Add USB nodes on stm32mp231
` [PATCH v3 9/9] arm64: dts: st: Add USB nodes on stm32mp251
[PATCH v7 0/7] drm/bridge: Implement generic USB Type-C DP HPD bridge
2026-08-28 9:14 UTC (14+ messages)
` [PATCH v7 1/7] drm/bridge: aux-hpd-bridge: Add drm_dev_has_dp_hpd_bridge()
` [PATCH v7 2/7] drm/bridge: Implement generic USB Type-C DP HPD bridge
` [PATCH v7 3/7] drm/display: Add soft depend for aux-hpd-typec-dp-bridge module
` [PATCH v7 4/7] drm/bridge: aux: Add drm_aux_bridge_register_from_node()
` [PATCH v7 5/7] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge
` [PATCH v7 6/7] drm/rockchip: cdn-dp: Support handle lane info without extcon
` [PATCH v7 7/7] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection
[PATCH v2 0/4] Add PCIe support for Qualcomm Nord platform
2026-08-28 8:54 UTC (9+ messages)
` [PATCH v2 1/4] dt-bindings: phy: qcom: add Nord QMP PCIe PHY binding
` [PATCH v2 2/4] dt-bindings: pci: qcom: add Nord PCIe controller compatible
` [PATCH v2 3/4] PCI: qcom: Add CGC disable workaround for Nord PCIe
` [PATCH v2 4/4] phy: qcom: qmp-pcie: Add Nord Gen5x16 PCIe multi-PHY support
[PATCH v14 00/38] phy: rockchip: usbdp: Clean up the mess
2026-08-27 16:16 UTC (7+ messages)
` [PATCH v14 28/38] phy: core: add notifier infrastructure
[PATCH] phy: omap-usb2: add explicit PHY comparator API
2026-08-27 15:51 UTC (3+ messages)
[PATCH] phy: rockchip-samsung-dcphy: Enable runtime PM at PHY core level
2026-08-27 13:36 UTC (2+ messages)
[PATCH 0/2] phy: Make sure clk_init_data is fully initialized
2026-08-27 13:33 UTC (4+ messages)
` [PATCH 2/2] phy: rockchip: "
[PATCH v3 0/3] phy: Add support for Airoha AN7583 USB PHY
2026-08-27 13:26 UTC (7+ messages)
` [PATCH v3 1/3] dt-bindings: phy: airoha: Document support for "
` [PATCH v3 2/3] dt-bindings: phy: airoha: Document support for AN7583 Gen2 PCIe PHY
` [PATCH v3 3/3] phy: airoha: Add support for Airoha AN7583 USB PHY
[PATCH 00/16] Add support for USB Type-C on STM32MP25
2026-08-27 12:55 UTC (20+ messages)
` [PATCH 04/16] usb: typec: tcpm: Add STM32 UCPD driver
` [PATCH 05/16] dt-bindings: usb: add FUSB340 switch binding
` [PATCH 07/16] dt-bindings: nvmem: st,stm32-romem: align patternProperties regex on nvmem-deprecated-cells.yaml
` [PATCH 08/16] arm64: dts: st: Add ucpd node on stm32mp251
` [PATCH 11/16] dt-bindings: usb: dwc3: stm32: refer to dwc3-common
` [PATCH 12/16] dt-bindings: phy: stm32: adapt usb2phy as syscon child on stm32mp25
` [PATCH 13/16] dt-bindings: arm: stm32mp2: allow child nodes since simple-mfd transition
` [PATCH 14/16] arm64: dts: st: enable usb on stm32mp257f-ev1
[PATCH v2 0/2] phy: airoha: add support for AN7583 PCIe PHY driver
2026-08-27 12:29 UTC (5+ messages)
` [PATCH v2 1/2] dt-bindings: phy: airoha: Document support for AN7583 Gen3 PCIe PHY
` [PATCH v2 2/2] phy: airoha: add support for AN7583 Gen3 PCIe PHY driver
[PATCH v6 0/5] Modify interrupt handling for eUSB2 Phy targets
2026-08-26 17:19 UTC (8+ messages)
` [PATCH v6 1/5] dt-bindings: phy: Add PHY_TYPE_EUSB2 definition
` [PATCH v6 2/5] include: linux: phy: Add phy attribute "type" and associated helpers
` [PATCH v6 3/5] phy: snps-eusb2: Set phy type to EUSB2
` [PATCH v6 4/5] phy: qcom: m31-eusb2: "
` [PATCH v6 5/5] usb: dwc3: qcom: Modify interrupt handling for eUSB2 Phy targets
[PATCH 0/2] phy: mediatek: xsphy: add eUSB2 repeater support for USB2 ports
2026-08-26 16:02 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: phy: mediatek,xsphy: add optional repeater phys property
` [PATCH 2/2] phy: mediatek: xsphy: add optional repeater support for USB2 ports
[PATCH 1/2] phy: qcom: qmp-pcie: Select MFD_SYSCON for the multi-PHY driver
2026-08-26 9:09 UTC (5+ messages)
` [PATCH 2/2] phy: qcom: qmp-pcie: Check clock-output-names count in "
[PATCH 0/8] arm64: dts: phy: st: usb: Add STM32MP2 USB support
2026-08-26 5:23 UTC (4+ messages)
` [PATCH 6/8] usb: dwc3: dwc3-generic-plat: Add ST STM32MP2 DWC3 xHCI USB controller glue
[PATCH v2 0/2] phy: spacemit: fix and enable the K1 USB 2.0 PHY
2026-08-25 23:07 UTC (5+ messages)
` [PATCH v2 1/2] phy: spacemit: fix K1 USB 2.0 PHY Kconfig dependencies
` [PATCH v2 2/2] phy: spacemit: enable K1 USB 2.0 PHY by default on ARCH_SPACEMIT
[PATCH] phy: spacemit: enable K1 USB 2.0 PHY by default on ARCH_SPACEMIT
2026-08-25 22:27 UTC (3+ messages)
[PATCH v11 00/12] ZTE zx297520v3 clock bindings and driver
2026-08-25 21:38 UTC (25+ messages)
` [PATCH v11 01/12] dt-bindings: clk: zte: Add zx297520v3 top clock and reset controller
` [PATCH v11 02/12] dt-bindings: clk: zte: Add zx297520v3 matrix "
` [PATCH v11 03/12] dt-bindings: clk: zte: Add zx297520v3 LSP "
` [PATCH v11 04/12] ARM: dts: zte: Declare zx297520v3 CRM device nodes
` [PATCH v11 05/12] mfd: zx297520v3: Add a clock and reset MFD driver
` [PATCH v11 06/12] clk: zte: Add Clock registration infrastructure
` [PATCH v11 07/12] clk: zte: Add regmap-based clocks
` [PATCH v11 08/12] clk: zte: Add zx PLL support infrastructure
` [PATCH v11 09/12] clk: zte: Introduce a driver for zx297520v3 top clocks
` [PATCH v11 10/12] clk: zte: Introduce a driver for zx297520v3 matrix clocks
` [PATCH v11 11/12] clk: zte: Introduce a driver for zx297520v3 LSP clocks
` [PATCH v11 12/12] reset: zte: Add a zx297520v3 reset driver
[PATCH v6] phy: Add USB3 PHY support to Google Tensor SoC USB PHY driver
2026-08-25 18:24 UTC (2+ messages)
[PATCH 0/4] Add PCIe support for Qualcomm Nord platform
2026-08-25 9:04 UTC (6+ messages)
` [PATCH 1/4] dt-bindings: phy: qcom: add Nord QMP PCIe PHY binding
` [PATCH 2/4] dt-bindings: pci: qcom: add Nord PCIe controller compatible
` [PATCH 3/4] PCI: qcom: Add CGC disable workaround for Nord PCIe
` [PATCH 4/4] phy: qcom: qmp-pcie: Add Nord Gen5x16 PCIe multi-PHY support
[PATCH 0/9] PCI: qcom: Add PCIe support for Shikra SoC
2026-08-25 5:41 UTC (6+ messages)
` [PATCH 2/9] dt-bindings: PCI: qcom: Document the Shikra PCIe Controller
[PATCH v2 00/14] Enable USB3 for Qualcomm IPQ5018 and IPQ5332
2026-08-24 14:40 UTC (17+ messages)
` [PATCH v2 02/14] phy: qcom: Introduce Qualcomm IPQ5332 Super-Speed USB UNIPHY driver
` [PATCH v2 04/14] arm64: dts: qcom: ipq5332: Flatten usb controller node
` [PATCH v2 05/14] arm64: dts: qcom: ipq5018: "
` [PATCH v2 08/14] arm64: dts: qcom: ipq5332: Add clocks required for USB3 support
` [PATCH v2 09/14] arm64: dts: qcom: ipq5018: "
` [PATCH v2 13/14] arm64: dts: qcom: ipq5018: Enable USB Super-Speed PHY
[PATCH 0/4] drm/msm/dp, phy: qcom: improve DP Type-C reconnect handling
2026-08-24 13:17 UTC (11+ messages)
` [PATCH 1/4] phy: qcom: qmp-combo: delay Type-C mux switch while DP PHY is initializing
` [PATCH 2/4] drm/msm/dp: clear force_link_train flag when link training succeeds
` [PATCH 3/4] drm/msm/dp: skip LTTPR init when no LTTPRs are present
` [PATCH 4/4] drm/msm/dp: continue link training downgrade when cable is still plugged
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox