From: Vinod Koul <vkoul@kernel.org>
To: Johan Hovold <johan+linaro@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 09/16] phy: qcom-qmp-pcie: add register init helper
Date: Sat, 5 Nov 2022 17:38:54 +0530 [thread overview]
Message-ID: <Y2ZSVooZDBDnsKD3@matsya> (raw)
In-Reply-To: <20221028133603.18470-10-johan+linaro@kernel.org>
On 28-10-22, 15:35, Johan Hovold wrote:
> Generalise the serdes initialisation helper so that it can be used to
> initialise all the PHY registers (e.g. serdes, tx, rx, pcs).
>
> Note that this defers the ungating of the PIPE clock somewhat, which is
> fine as it isn't needed until starting the PHY.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 37 +++++-------------------
> 1 file changed, 8 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> index 791ed7ef0eab..f57d10f20277 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> @@ -1820,27 +1820,22 @@ static void qmp_pcie_configure(void __iomem *base,
> qmp_pcie_configure_lane(base, tbl, num, 0xff);
> }
>
> -static void qmp_pcie_serdes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
> -{
> - void __iomem *serdes = qmp->serdes;
> -
> - if (!tbls)
> - return;
> -
> - qmp_pcie_configure(serdes, tbls->serdes, tbls->serdes_num);
> -}
> -
> -static void qmp_pcie_lanes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
> +static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
> {
> const struct qmp_phy_cfg *cfg = qmp->cfg;
> + void __iomem *serdes = qmp->serdes;
> void __iomem *tx = qmp->tx;
> void __iomem *rx = qmp->rx;
> void __iomem *tx2 = qmp->tx2;
> void __iomem *rx2 = qmp->rx2;
> + void __iomem *pcs = qmp->pcs;
> + void __iomem *pcs_misc = qmp->pcs_misc;
>
> if (!tbls)
> return;
>
> + qmp_pcie_configure(serdes, tbls->serdes, tbls->serdes_num);
We are tbls
> +
> qmp_pcie_configure_lane(tx, tbls->tx, tbls->tx_num, 1);
> qmp_pcie_configure_lane(rx, tbls->rx, tbls->rx_num, 1);
>
> @@ -1848,15 +1843,6 @@ static void qmp_pcie_lanes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_t
> qmp_pcie_configure_lane(tx2, tbls->tx, tbls->tx_num, 2);
> qmp_pcie_configure_lane(rx2, tbls->rx, tbls->rx_num, 2);
> }
> -}
> -
> -static void qmp_pcie_pcs_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
> -{
> - void __iomem *pcs = qmp->pcs;
> - void __iomem *pcs_misc = qmp->pcs_misc;
> -
> - if (!tbls)
> - return;
>
> qmp_pcie_configure(pcs, tbls->pcs, tbls->pcs_num);
> qmp_pcie_configure(pcs_misc, tbls->pcs_misc, tbls->pcs_misc_num);
> @@ -1932,8 +1918,8 @@ static int qmp_pcie_power_on(struct phy *phy)
> else
> mode_tables = cfg->tables_ep;
>
> - qmp_pcie_serdes_init(qmp, &cfg->tables);
> - qmp_pcie_serdes_init(qmp, mode_tables);
> + qmp_pcie_init_registers(qmp, &cfg->tables);
> + qmp_pcie_init_registers(qmp, mode_tables);
but here tables :(
Lets stick with either please, or if we have differentiation lets make
it real obvious
>
> ret = clk_prepare_enable(qmp->pipe_clk);
> if (ret) {
> @@ -1941,13 +1927,6 @@ static int qmp_pcie_power_on(struct phy *phy)
> return ret;
> }
>
> - /* Tx, Rx, and PCS configurations */
> - qmp_pcie_lanes_init(qmp, &cfg->tables);
> - qmp_pcie_lanes_init(qmp, mode_tables);
> -
> - qmp_pcie_pcs_init(qmp, &cfg->tables);
> - qmp_pcie_pcs_init(qmp, mode_tables);
> -
> /* Pull PHY out of reset state */
> qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>
> --
> 2.37.3
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2022-11-05 12:09 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-28 13:35 [PATCH v4 00/16] phy: qcom-qmp-pcie: add support for sc8280xp Johan Hovold
2022-10-28 13:35 ` [PATCH v4 01/16] phy: qcom-qmp-pcie: sort device-id table Johan Hovold
2022-10-28 13:35 ` [PATCH v4 02/16] phy: qcom-qmp-pcie: move " Johan Hovold
2022-10-28 13:35 ` [PATCH v4 03/16] phy: qcom-qmp-pcie: merge driver data Johan Hovold
2022-10-28 13:35 ` [PATCH v4 04/16] phy: qcom-qmp-pcie: clean up device-tree parsing Johan Hovold
2022-10-28 14:14 ` Dmitry Baryshkov
2022-10-28 13:35 ` [PATCH v4 05/16] phy: qcom-qmp-pcie: clean up probe initialisation Johan Hovold
2022-10-28 13:35 ` [PATCH v4 06/16] phy: qcom-qmp-pcie: rename PHY ops structure Johan Hovold
2022-10-28 13:35 ` [PATCH v4 07/16] phy: qcom-qmp-pcie: clean up PHY lane init Johan Hovold
2022-10-28 13:35 ` [PATCH v4 08/16] phy: qcom-qmp-pcie: use shorter tables identifier Johan Hovold
2022-11-05 12:07 ` Vinod Koul
2022-11-05 13:11 ` Johan Hovold
2022-10-28 13:35 ` [PATCH v4 09/16] phy: qcom-qmp-pcie: add register init helper Johan Hovold
2022-10-28 14:15 ` Dmitry Baryshkov
2022-11-05 12:08 ` Vinod Koul [this message]
2022-11-05 13:17 ` Johan Hovold
2022-11-05 13:30 ` Vinod Koul
2022-10-28 13:35 ` [PATCH v4 10/16] dt-bindings: phy: qcom,qmp-pcie: rename current bindings Johan Hovold
2022-10-28 21:57 ` Krzysztof Kozlowski
2022-10-29 8:47 ` Johan Hovold
2022-11-05 12:09 ` Vinod Koul
2022-11-05 13:19 ` Johan Hovold
2022-10-28 13:35 ` [PATCH v4 11/16] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings Johan Hovold
2022-10-28 13:35 ` [PATCH v4 12/16] phy: qcom-qmp-pcie: restructure PHY creation Johan Hovold
2022-10-28 13:36 ` [PATCH v4 13/16] phy: qcom-qmp-pcie: fix initialisation reset Johan Hovold
2022-10-28 13:36 ` [PATCH v4 14/16] phy: qcom-qmp-pcie: add support for pipediv2 clock Johan Hovold
2022-10-28 13:36 ` [PATCH v4 15/16] phy: qcom-qmp-pcie: add support for sc8280xp Johan Hovold
2022-10-28 14:17 ` Dmitry Baryshkov
2022-10-28 13:36 ` [PATCH v4 16/16] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y2ZSVooZDBDnsKD3@matsya \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=johan+linaro@kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox