[PATCH v2 0/8] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY

[PATCH v2 0/8] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY

[Samuel Holland]

This series adds support for the updated DPHY found in a couple of
recent Allwinner SoCs. The first three patches fix an omission in the
existing binding. The remaining patches add the new hardware variant.

Changes in v2:
 - Add the interrupts property to the binding example
 - Drop the inappropriate Fixes tags
 - Rename "supports_rx" to "rx_supported"
 - Add a blank line for readability

Samuel Holland (8):
  dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property
  ARM: dts: sun8i: a33: Add DPHY interrupt
  arm64: dts: allwinner: a64: Add DPHY interrupt
  dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant
  phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional
  phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last
  phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
  phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant

 .../phy/allwinner,sun6i-a31-mipi-dphy.yaml    |  11 +
 arch/arm/boot/dts/sun8i-a33.dtsi              |   1 +
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi |   1 +
 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c   | 236 +++++++++++++++---
 4 files changed, 218 insertions(+), 31 deletions(-)

-- 
2.37.3


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property

[Samuel Holland]

The sun6i DPHY can generate several interrupts, mostly for reporting
error conditions, but also for detecting BTA and UPLS sequences.
Document this capability in order to accurately describe the hardware.

The DPHY has no interrupt number provided in the vendor documentation
because its interrupt line is shared with the DSI controller.

A trivial interrupt handler was used to verify that interrupts were in
fact generated by the DPHY and not the DSI controller.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

Changes in v2:
 - Add the interrupts property to the binding example
 - Drop the inappropriate Fixes tags

 .../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml        | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
index dfb6a8993535..4c45d7fcc853 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
@@ -24,6 +24,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   clocks:
     items:
       - description: Bus Clock
@@ -53,6 +56,7 @@ required:
   - "#phy-cells"
   - compatible
   - reg
+  - interrupts
   - clocks
   - clock-names
   - resets
@@ -61,9 +65,12 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     dphy0: d-phy@1ca1000 {
         compatible = "allwinner,sun6i-a31-mipi-dphy";
         reg = <0x01ca1000 0x1000>;
+        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&ccu 23>, <&ccu 97>;
         clock-names = "bus", "mod";
         resets = <&ccu 4>;
-- 
2.37.3


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v2 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property

[Krzysztof Kozlowski]

On 14/11/2022 03:21, Samuel Holland wrote:
> The sun6i DPHY can generate several interrupts, mostly for reporting
> error conditions, but also for detecting BTA and UPLS sequences.
> Document this capability in order to accurately describe the hardware.
> 
> The DPHY has no interrupt number provided in the vendor documentation
> because its interrupt line is shared with the DSI controller.
> 
> A trivial interrupt handler was used to verify that interrupts were in
> fact generated by the DPHY and not the DSI controller.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
> 
> Changes in v2:
>  - Add the interrupts property to the binding example


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 2/8] ARM: dts: sun8i: a33: Add DPHY interrupt

[Samuel Holland]

The DPHY has an interrupt line which is shared with the DSI controller.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

(no changes since v1)

 arch/arm/boot/dts/sun8i-a33.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index b3d1bdfb5118..30fdd2703b1f 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -278,6 +278,7 @@ dsi_in_tcon0: endpoint {
 		dphy: d-phy@1ca1000 {
 			compatible = "allwinner,sun6i-a31-mipi-dphy";
 			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_MIPI_DSI>,
 				 <&ccu CLK_DSI_DPHY>;
 			clock-names = "bus", "mod";
-- 
2.37.3


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 3/8] arm64: dts: allwinner: a64: Add DPHY interrupt

[Samuel Holland]

The DPHY has an interrupt line which is shared with the DSI controller.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

(no changes since v1)

 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 77b5349f6087..62f45f71ec65 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -1199,6 +1199,7 @@ dphy: d-phy@1ca1000 {
 			compatible = "allwinner,sun50i-a64-mipi-dphy",
 				     "allwinner,sun6i-a31-mipi-dphy";
 			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_MIPI_DSI>,
 				 <&ccu CLK_DSI_DPHY>;
 			clock-names = "bus", "mod";
-- 
2.37.3


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 4/8] dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant

[Samuel Holland]

A100 features an updated DPHY, which moves PLL control inside the DPHY
register space. (Previously PLL-MIPI was controlled from the CCU. This
does not affect the "clocks" property because the link between PLL-MIPI
and the DPHY was never represented in the devicetree.) It also requires
a modified analog power-on sequence. Finally, the new DPHY adds support
for operating as an LVDS PHY. D1 uses this same variant.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---

(no changes since v1)

 .../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml           | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
index 4c45d7fcc853..fe9702e7bdd8 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
@@ -17,9 +17,13 @@ properties:
   compatible:
     oneOf:
       - const: allwinner,sun6i-a31-mipi-dphy
+      - const: allwinner,sun50i-a100-mipi-dphy
       - items:
           - const: allwinner,sun50i-a64-mipi-dphy
           - const: allwinner,sun6i-a31-mipi-dphy
+      - items:
+          - const: allwinner,sun20i-d1-mipi-dphy
+          - const: allwinner,sun50i-a100-mipi-dphy
 
   reg:
     maxItems: 1
-- 
2.37.3


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 5/8] phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional

[Samuel Holland]

While all variants of the DPHY likely support RX mode, the new variant
in the A100 is not used in this direction by the BSP, and it has some
analog register changes, so its RX power-on sequence is unknown. To be
safe, limit RX support to variants where the power-on sequence is known.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

Changes in v2:
 - Rename "supports_rx" to "rx_supported"
 - Add a blank line for readability

 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 26 +++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index 3900f1650851..7d7322670a83 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -114,6 +114,10 @@ enum sun6i_dphy_direction {
 	SUN6I_DPHY_DIRECTION_RX,
 };
 
+struct sun6i_dphy_variant {
+	bool	rx_supported;
+};
+
 struct sun6i_dphy {
 	struct clk				*bus_clk;
 	struct clk				*mod_clk;
@@ -123,6 +127,7 @@ struct sun6i_dphy {
 	struct phy				*phy;
 	struct phy_configure_opts_mipi_dphy	config;
 
+	const struct sun6i_dphy_variant		*variant;
 	enum sun6i_dphy_direction		direction;
 };
 
@@ -409,6 +414,10 @@ static int sun6i_dphy_probe(struct platform_device *pdev)
 	if (!dphy)
 		return -ENOMEM;
 
+	dphy->variant = device_get_match_data(&pdev->dev);
+	if (!dphy->variant)
+		return -EINVAL;
+
 	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs)) {
 		dev_err(&pdev->dev, "Couldn't map the DPHY encoder registers\n");
@@ -445,8 +454,14 @@ static int sun6i_dphy_probe(struct platform_device *pdev)
 	ret = of_property_read_string(pdev->dev.of_node, "allwinner,direction",
 				      &direction);
 
-	if (!ret && !strncmp(direction, "rx", 2))
+	if (!ret && !strncmp(direction, "rx", 2)) {
+		if (!dphy->variant->rx_supported) {
+			dev_err(&pdev->dev, "RX not supported on this variant\n");
+			return -EOPNOTSUPP;
+		}
+
 		dphy->direction = SUN6I_DPHY_DIRECTION_RX;
+	}
 
 	phy_set_drvdata(dphy->phy, dphy);
 	phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
@@ -454,8 +469,15 @@ static int sun6i_dphy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
+static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
+	.rx_supported	= true,
+};
+
 static const struct of_device_id sun6i_dphy_of_table[] = {
-	{ .compatible = "allwinner,sun6i-a31-mipi-dphy" },
+	{
+		.compatible	= "allwinner,sun6i-a31-mipi-dphy",
+		.data		= &sun6i_a31_mipi_dphy_variant,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sun6i_dphy_of_table);
-- 
2.37.3


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 6/8] phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last

[Samuel Holland]

The A100 variant of the DPHY requires configuring the analog registers
before setting the global enable bit. Since this order also works on the
other variants, always use it, to minimize the differences between them.

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---

(no changes since v1)

 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index 7d7322670a83..a2afedc399fd 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -183,10 +183,6 @@ static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
 		     SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
 		     SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
 
-	regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG,
-		     SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) |
-		     SUN6I_DPHY_GCTL_EN);
-
 	regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
 		     SUN6I_DPHY_ANA0_REG_PWS |
 		     SUN6I_DPHY_ANA0_REG_DMPC |
@@ -244,6 +240,10 @@ static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
 			   SUN6I_DPHY_ANA2_EN_P2S_CPU_MASK,
 			   SUN6I_DPHY_ANA2_EN_P2S_CPU(lanes_mask));
 
+	regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG,
+		     SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) |
+		     SUN6I_DPHY_GCTL_EN);
+
 	return 0;
 }
 
-- 
2.37.3


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 7/8] phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook

[Samuel Holland]

The A100 variant uses the same values for the timing registers, and it
uses the same final power-on sequence, but it needs a different analog
register configuration in the middle. Support this by moving the
variant-specific parts to a hook provided by the variant.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

(no changes since v1)

 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 59 ++++++++++++---------
 1 file changed, 35 insertions(+), 24 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index a2afedc399fd..ac144ee0f0a6 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -114,7 +114,10 @@ enum sun6i_dphy_direction {
 	SUN6I_DPHY_DIRECTION_RX,
 };
 
+struct sun6i_dphy;
+
 struct sun6i_dphy_variant {
+	void	(*tx_power_on)(struct sun6i_dphy *dphy);
 	bool	rx_supported;
 };
 
@@ -156,33 +159,10 @@ static int sun6i_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
 	return 0;
 }
 
-static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
+static void sun6i_a31_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
 {
 	u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
 
-	regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
-		     SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
-
-	regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
-		     SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
-		     SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
-		     SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
-
-	regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
-		     SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
-		     SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
-		     SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
-		     SUN6I_DPHY_TX_TIME1_CLK_POST(10));
-
-	regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
-		     SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
-
-	regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
-
-	regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
-		     SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
-		     SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
-
 	regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
 		     SUN6I_DPHY_ANA0_REG_PWS |
 		     SUN6I_DPHY_ANA0_REG_DMPC |
@@ -214,6 +194,36 @@ static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
 		     SUN6I_DPHY_ANA3_EN_LDOC |
 		     SUN6I_DPHY_ANA3_EN_LDOD);
 	udelay(1);
+}
+
+static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
+{
+	u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
+
+	regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
+		     SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
+
+	regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
+		     SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
+		     SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
+		     SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
+
+	regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
+		     SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
+		     SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
+		     SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
+		     SUN6I_DPHY_TX_TIME1_CLK_POST(10));
+
+	regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
+		     SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
+
+	regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
+
+	regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
+		     SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
+		     SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
+
+	dphy->variant->tx_power_on(dphy);
 
 	regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA3_REG,
 			   SUN6I_DPHY_ANA3_EN_VTTC |
@@ -470,6 +480,7 @@ static int sun6i_dphy_probe(struct platform_device *pdev)
 }
 
 static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
+	.tx_power_on	= sun6i_a31_mipi_dphy_tx_power_on,
 	.rx_supported	= true,
 };
 
-- 
2.37.3


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 8/8] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant

[Samuel Holland]

A100 features an updated DPHY, which moves PLL control inside the DPHY
register space (previously the PLL was controlled from the CCU). It also
requires a modified analog power-on sequence. This "combo PHY" can also
be used as an LVDS PHY, but that is not yet supported by the driver.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

(no changes since v1)

 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 143 +++++++++++++++++++-
 1 file changed, 142 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index ac144ee0f0a6..36eab95271b2 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -70,11 +70,19 @@
 
 #define SUN6I_DPHY_ANA0_REG		0x4c
 #define SUN6I_DPHY_ANA0_REG_PWS			BIT(31)
+#define SUN6I_DPHY_ANA0_REG_PWEND		BIT(30)
+#define SUN6I_DPHY_ANA0_REG_PWENC		BIT(29)
 #define SUN6I_DPHY_ANA0_REG_DMPC		BIT(28)
 #define SUN6I_DPHY_ANA0_REG_DMPD(n)		(((n) & 0xf) << 24)
+#define SUN6I_DPHY_ANA0_REG_SRXDT(n)		(((n) & 0xf) << 20)
+#define SUN6I_DPHY_ANA0_REG_SRXCK(n)		(((n) & 0xf) << 16)
+#define SUN6I_DPHY_ANA0_REG_SDIV2		BIT(15)
 #define SUN6I_DPHY_ANA0_REG_SLV(n)		(((n) & 7) << 12)
 #define SUN6I_DPHY_ANA0_REG_DEN(n)		(((n) & 0xf) << 8)
+#define SUN6I_DPHY_ANA0_REG_PLR(n)		(((n) & 0xf) << 4)
 #define SUN6I_DPHY_ANA0_REG_SFB(n)		(((n) & 3) << 2)
+#define SUN6I_DPHY_ANA0_REG_RSD			BIT(1)
+#define SUN6I_DPHY_ANA0_REG_SELSCK		BIT(0)
 
 #define SUN6I_DPHY_ANA1_REG		0x50
 #define SUN6I_DPHY_ANA1_REG_VTTMODE		BIT(31)
@@ -97,8 +105,13 @@
 #define SUN6I_DPHY_ANA3_EN_LDOR			BIT(18)
 
 #define SUN6I_DPHY_ANA4_REG		0x5c
+#define SUN6I_DPHY_ANA4_REG_EN_MIPI		BIT(31)
+#define SUN6I_DPHY_ANA4_REG_EN_COMTEST		BIT(30)
+#define SUN6I_DPHY_ANA4_REG_COMTEST(n)		(((n) & 3) << 28)
+#define SUN6I_DPHY_ANA4_REG_IB(n)		(((n) & 3) << 25)
 #define SUN6I_DPHY_ANA4_REG_DMPLVC		BIT(24)
 #define SUN6I_DPHY_ANA4_REG_DMPLVD(n)		(((n) & 0xf) << 20)
+#define SUN6I_DPHY_ANA4_REG_VTT_SET(n)		(((n) & 0x7) << 17)
 #define SUN6I_DPHY_ANA4_REG_CKDV(n)		(((n) & 0x1f) << 12)
 #define SUN6I_DPHY_ANA4_REG_TMSC(n)		(((n) & 3) << 10)
 #define SUN6I_DPHY_ANA4_REG_TMSD(n)		(((n) & 3) << 8)
@@ -109,6 +122,56 @@
 
 #define SUN6I_DPHY_DBG5_REG		0xf4
 
+#define SUN50I_DPHY_TX_SLEW_REG0	0xf8
+#define SUN50I_DPHY_TX_SLEW_REG1	0xfc
+#define SUN50I_DPHY_TX_SLEW_REG2	0x100
+
+#define SUN50I_DPHY_PLL_REG0		0x104
+#define SUN50I_DPHY_PLL_REG0_CP36_EN		BIT(23)
+#define SUN50I_DPHY_PLL_REG0_LDO_EN		BIT(22)
+#define SUN50I_DPHY_PLL_REG0_EN_LVS		BIT(21)
+#define SUN50I_DPHY_PLL_REG0_PLL_EN		BIT(20)
+#define SUN50I_DPHY_PLL_REG0_P(n)		(((n) & 0xf) << 16)
+#define SUN50I_DPHY_PLL_REG0_N(n)		(((n) & 0xff) << 8)
+#define SUN50I_DPHY_PLL_REG0_NDET		BIT(7)
+#define SUN50I_DPHY_PLL_REG0_TDIV		BIT(6)
+#define SUN50I_DPHY_PLL_REG0_M0(n)		(((n) & 3) << 4)
+#define SUN50I_DPHY_PLL_REG0_M1(n)		((n) & 0xf)
+
+#define SUN50I_DPHY_PLL_REG1		0x108
+#define SUN50I_DPHY_PLL_REG1_UNLOCK_MDSEL(n)	(((n) & 3) << 14)
+#define SUN50I_DPHY_PLL_REG1_LOCKMDSEL		BIT(13)
+#define SUN50I_DPHY_PLL_REG1_LOCKDET_EN		BIT(12)
+#define SUN50I_DPHY_PLL_REG1_VSETA(n)		(((n) & 0x7) << 9)
+#define SUN50I_DPHY_PLL_REG1_VSETD(n)		(((n) & 0x7) << 6)
+#define SUN50I_DPHY_PLL_REG1_LPF_SW		BIT(5)
+#define SUN50I_DPHY_PLL_REG1_ICP_SEL(n)		(((n) & 3) << 3)
+#define SUN50I_DPHY_PLL_REG1_ATEST_SEL(n)	(((n) & 3) << 1)
+#define SUN50I_DPHY_PLL_REG1_TEST_EN		BIT(0)
+
+#define SUN50I_DPHY_PLL_REG2		0x10c
+#define SUN50I_DPHY_PLL_REG2_SDM_EN		BIT(31)
+#define SUN50I_DPHY_PLL_REG2_FF_EN		BIT(30)
+#define SUN50I_DPHY_PLL_REG2_SS_EN		BIT(29)
+#define SUN50I_DPHY_PLL_REG2_SS_FRAC(n)		(((n) & 0x1ff) << 20)
+#define SUN50I_DPHY_PLL_REG2_SS_INT(n)		(((n) & 0xff) << 12)
+#define SUN50I_DPHY_PLL_REG2_FRAC(n)		((n) & 0xfff)
+
+#define SUN50I_COMBO_PHY_REG0		0x110
+#define SUN50I_COMBO_PHY_REG0_EN_TEST_COMBOLDO	BIT(5)
+#define SUN50I_COMBO_PHY_REG0_EN_TEST_0P8	BIT(4)
+#define SUN50I_COMBO_PHY_REG0_EN_MIPI		BIT(3)
+#define SUN50I_COMBO_PHY_REG0_EN_LVDS		BIT(2)
+#define SUN50I_COMBO_PHY_REG0_EN_COMBOLDO	BIT(1)
+#define SUN50I_COMBO_PHY_REG0_EN_CP		BIT(0)
+
+#define SUN50I_COMBO_PHY_REG1		0x114
+#define SUN50I_COMBO_PHY_REG2_REG_VREF1P6(n)	(((n) & 0x7) << 4)
+#define SUN50I_COMBO_PHY_REG2_REG_VREF0P8(n)	((n) & 0x7)
+
+#define SUN50I_COMBO_PHY_REG2		0x118
+#define SUN50I_COMBO_PHY_REG2_HS_STOP_DLY(n)	((n) & 0xff)
+
 enum sun6i_dphy_direction {
 	SUN6I_DPHY_DIRECTION_TX,
 	SUN6I_DPHY_DIRECTION_RX,
@@ -196,6 +259,76 @@ static void sun6i_a31_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
 	udelay(1);
 }
 
+static void sun50i_a100_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
+{
+	unsigned long mipi_symbol_rate = dphy->config.hs_clk_rate;
+	unsigned int div, n;
+
+	regmap_write(dphy->regs, SUN6I_DPHY_ANA4_REG,
+		     SUN6I_DPHY_ANA4_REG_IB(2) |
+		     SUN6I_DPHY_ANA4_REG_DMPLVD(4) |
+		     SUN6I_DPHY_ANA4_REG_VTT_SET(3) |
+		     SUN6I_DPHY_ANA4_REG_CKDV(3) |
+		     SUN6I_DPHY_ANA4_REG_TMSD(1) |
+		     SUN6I_DPHY_ANA4_REG_TMSC(1) |
+		     SUN6I_DPHY_ANA4_REG_TXPUSD(2) |
+		     SUN6I_DPHY_ANA4_REG_TXPUSC(3) |
+		     SUN6I_DPHY_ANA4_REG_TXDNSD(2) |
+		     SUN6I_DPHY_ANA4_REG_TXDNSC(3));
+
+	regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA2_REG,
+			   SUN6I_DPHY_ANA2_EN_CK_CPU,
+			   SUN6I_DPHY_ANA2_EN_CK_CPU);
+
+	regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA2_REG,
+			   SUN6I_DPHY_ANA2_REG_ENIB,
+			   SUN6I_DPHY_ANA2_REG_ENIB);
+
+	regmap_write(dphy->regs, SUN6I_DPHY_ANA3_REG,
+		     SUN6I_DPHY_ANA3_EN_LDOR |
+		     SUN6I_DPHY_ANA3_EN_LDOC |
+		     SUN6I_DPHY_ANA3_EN_LDOD);
+
+	regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
+		     SUN6I_DPHY_ANA0_REG_PLR(4) |
+		     SUN6I_DPHY_ANA0_REG_SFB(1));
+
+	regmap_write(dphy->regs, SUN50I_COMBO_PHY_REG0,
+		     SUN50I_COMBO_PHY_REG0_EN_CP);
+
+	/* Choose a divider to limit the VCO frequency to around 2 GHz. */
+	div = 16 >> order_base_2(DIV_ROUND_UP(mipi_symbol_rate, 264000000));
+	n = mipi_symbol_rate * div / 24000000;
+
+	regmap_write(dphy->regs, SUN50I_DPHY_PLL_REG0,
+		     SUN50I_DPHY_PLL_REG0_CP36_EN |
+		     SUN50I_DPHY_PLL_REG0_LDO_EN |
+		     SUN50I_DPHY_PLL_REG0_EN_LVS |
+		     SUN50I_DPHY_PLL_REG0_PLL_EN |
+		     SUN50I_DPHY_PLL_REG0_NDET |
+		     SUN50I_DPHY_PLL_REG0_P((div - 1) % 8) |
+		     SUN50I_DPHY_PLL_REG0_N(n) |
+		     SUN50I_DPHY_PLL_REG0_M0((div - 1) / 8) |
+		     SUN50I_DPHY_PLL_REG0_M1(2));
+
+	/* Disable sigma-delta modulation. */
+	regmap_write(dphy->regs, SUN50I_DPHY_PLL_REG2, 0);
+
+	regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA4_REG,
+			   SUN6I_DPHY_ANA4_REG_EN_MIPI,
+			   SUN6I_DPHY_ANA4_REG_EN_MIPI);
+
+	regmap_update_bits(dphy->regs, SUN50I_COMBO_PHY_REG0,
+			   SUN50I_COMBO_PHY_REG0_EN_MIPI |
+			   SUN50I_COMBO_PHY_REG0_EN_COMBOLDO,
+			   SUN50I_COMBO_PHY_REG0_EN_MIPI |
+			   SUN50I_COMBO_PHY_REG0_EN_COMBOLDO);
+
+	regmap_write(dphy->regs, SUN50I_COMBO_PHY_REG2,
+		     SUN50I_COMBO_PHY_REG2_HS_STOP_DLY(20));
+	udelay(1);
+}
+
 static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
 {
 	u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
@@ -408,7 +541,7 @@ static const struct regmap_config sun6i_dphy_regmap_config = {
 	.reg_bits	= 32,
 	.val_bits	= 32,
 	.reg_stride	= 4,
-	.max_register	= SUN6I_DPHY_DBG5_REG,
+	.max_register	= SUN50I_COMBO_PHY_REG2,
 	.name		= "mipi-dphy",
 };
 
@@ -484,11 +617,19 @@ static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
 	.rx_supported	= true,
 };
 
+static const struct sun6i_dphy_variant sun50i_a100_mipi_dphy_variant = {
+	.tx_power_on	= sun50i_a100_mipi_dphy_tx_power_on,
+};
+
 static const struct of_device_id sun6i_dphy_of_table[] = {
 	{
 		.compatible	= "allwinner,sun6i-a31-mipi-dphy",
 		.data		= &sun6i_a31_mipi_dphy_variant,
 	},
+	{
+		.compatible	= "allwinner,sun50i-a100-mipi-dphy",
+		.data		= &sun50i_a100_mipi_dphy_variant,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sun6i_dphy_of_table);
-- 
2.37.3


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v2 0/8] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY

[Vinod Koul]

On 13-11-22, 20:21, Samuel Holland wrote:
> This series adds support for the updated DPHY found in a couple of
> recent Allwinner SoCs. The first three patches fix an omission in the
> existing binding. The remaining patches add the new hardware variant.

Applied 1 & 4-8, thanks

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v2 0/8] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY

[Jernej Škrabec]

Dne ponedeljek, 14. november 2022 ob 03:21:05 CET je Samuel Holland 
napisal(a):
> This series adds support for the updated DPHY found in a couple of
> recent Allwinner SoCs. The first three patches fix an omission in the
> existing binding. The remaining patches add the new hardware variant.
> 
> Changes in v2:
>  - Add the interrupts property to the binding example
>  - Drop the inappropriate Fixes tags
>  - Rename "supports_rx" to "rx_supported"
>  - Add a blank line for readability
> 
> Samuel Holland (8):
>   dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property
>   ARM: dts: sun8i: a33: Add DPHY interrupt
>   arm64: dts: allwinner: a64: Add DPHY interrupt
>   dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant
>   phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional
>   phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last
>   phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
>   phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant

Applied 2 and 3, thanks!

Best regards,
Jernej

> 
>  .../phy/allwinner,sun6i-a31-mipi-dphy.yaml    |  11 +
>  arch/arm/boot/dts/sun8i-a33.dtsi              |   1 +
>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi |   1 +
>  drivers/phy/allwinner/phy-sun6i-mipi-dphy.c   | 236 +++++++++++++++---
>  4 files changed, 218 insertions(+), 31 deletions(-)





-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy