Re: [GIT PULL]: Generic phy updates for 6.2

[Vinod Koul <vkoul@kernel.org>]

[-- Attachment #1.1: Type: text/plain, Size: 9167 bytes --]

Fixed Kishon email,

On 19-12-22, 12:30, Johan Hovold wrote:
> Hi Vinod,
> 
> On Sun, Dec 18, 2022 at 07:57:04PM +0530, Vinod Koul wrote:
> 
> > ----------------------------------------------------------------
> > phy-for-6.2
> > 
> >   - New support:
> >         - Allwinner H616 USB PHY and A100 DPHY support
> >         - TI J721s2, J784s4 and J721e support
> > 	- Freescale i.MX8MP PCIe PHY support
> > 	- New driver for Renesas Ethernet SERDES supporting R-Car S4-8
> > 	- Qualcomm SM8450 PCIe1 PHY support in EP mode
> 
> You could also have mentioned
> 
> 	- Qualcomm SC8280XP PCIe PHY support (including x4 mode)
> 	- Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings

Yes sorry to have missed that... I guess Linus might add this when
merging the PR..


> 
> which were the primary reasons for reworking the QMP drivers and DT
> bindings, something which also lead to a number of bugs in these drivers
> being found and fixed.
> 
> >   - Updates:
> >         - again a big pile of updates on qcom-qmp-* drivers following the
> >           driver split and reorganization merged earlier
> > 	- Phy order of API calls documentation update
> > 
> > ----------------------------------------------------------------
> 
> > Johan Hovold (131):
> >       phy: qcom-qmp: fix obsolete lane comments
> >       phy: qcom-qmp-combo: drop unused UFS reset
> >       phy: qcom-qmp-pcie: drop unused common-block registers
> >       phy: qcom-qmp-pcie: clean up power-down handling
> >       phy: qcom-qmp-pcie: move power-down update
> >       phy: qcom-qmp-pcie-msm8996: clean up power-down handling
> >       phy: qcom-qmp-combo: clean up power-down handling
> >       phy: qcom-qmp-ufs: clean up power-down handling
> >       phy: qcom-qmp-usb: clean up power-down handling
> >       phy: qcom-qmp-pcie: clean up clock lists
> >       phy: qcom-qmp-pcie: drop bogus register update
> >       phy: qcom-qmp: drop regulator error message
> >       phy: qcom-qmp: drop superfluous comments
> >       phy: qcom-qmp-combo: drop unused in-layout configuration
> >       phy: qcom-qmp-pcie: drop redundant ipq8074 power on
> >       phy: qcom-qmp-pcie-msm8996: drop unused in-layout configuration
> >       phy: qcom-qmp-ufs: drop unused in-layout configuration
> >       phy: qcom-qmp-usb: drop unused in-layout configuration
> >       phy: qcom-qmp-pcie: drop power-down delay config
> >       phy: qcom-qmp-pcie: replace power-down delay
> >       phy: qcom-qmp-pcie-msm8996: drop power-down delay config
> >       phy: qcom-qmp-combo: drop sc8280xp power-down delay
> >       phy: qcom-qmp-combo: drop power-down delay config
> >       phy: qcom-qmp-usb: drop sc8280xp power-down delay
> >       phy: qcom-qmp-usb: drop power-down delay config
> >       phy: qcom-qmp-pcie: fix sc8180x initialisation
> >       phy: qcom-qmp-pcie: fix ipq8074-gen3 initialisation
> >       phy: qcom-qmp-pcie: fix ipq6018 initialisation
> >       phy: qcom-qmp-pcie: clean up status polling
> >       phy: qcom-qmp-pcie: increase status polling period
> >       phy: qcom-qmp-pcie-msm8996: clean up ready and status polling
> >       phy: qcom-qmp-pcie-msm8996: increase status polling period
> >       phy: qcom-qmp-combo: clean up status polling
> >       phy: qcom-qmp-combo: increase status polling period
> >       phy: qcom-qmp-ufs: drop unused phy-status config
> >       phy: qcom-qmp-ufs: clean up ready polling
> >       phy: qcom-qmp-ufs: increase ready polling period
> >       phy: qcom-qmp-usb: clean up status polling
> >       phy: qcom-qmp-usb: increase status polling period
> >       phy: qcom-qmp-combo: drop start and pwrdn-ctrl abstraction
> >       phy: qcom-qmp-pcie: drop start-ctrl abstraction
> >       phy: qcom-qmp-pcie: add config sanity checks
> >       phy: qcom-qmp-pcie-msm8996: drop start and pwrdn-ctrl abstraction
> >       phy: qcom-qmp-ufs: drop start and pwrdn-ctrl abstraction
> >       phy: qcom-qmp-usb: drop start and pwrdn-ctrl abstraction
> >       phy: qcom-qmp-combo: fix NULL-deref on runtime resume
> >       phy: qcom-qmp-ufs: move device-id table
> >       phy: qcom-qmp-ufs: merge driver data
> >       phy: qcom-qmp-ufs: clean up device-tree parsing
> >       phy: qcom-qmp-ufs: clean up probe initialisation
> >       phy: qcom-qmp-ufs: rename PHY ops structure
> >       phy: qcom-qmp-ufs: clean up PHY init
> >       dt-bindings: phy: qcom,qmp-ufs: rename current bindings
> >       dt-bindings: phy: qcom,qmp-ufs: fix sc8280xp binding
> >       phy: qcom-qmp-ufs: restructure PHY creation
> >       phy: qcom-qmp-ufs: add support for updated sc8280xp binding
> >       phy: qcom-qmp-usb: fix sc8280xp PCS_USB offset
> >       phy: qcom-qmp-usb: sort device-id table
> >       phy: qcom-qmp-usb: move device-id table
> >       phy: qcom-qmp-usb: move pm ops
> >       phy: qcom-qmp-usb: merge driver data
> >       phy: qcom-qmp-usb: clean up device-tree parsing
> >       phy: qcom-qmp-usb: clean up probe initialisation
> >       phy: qcom-qmp-usb: rename PHY ops structure
> >       phy: qcom-qmp-usb: clean up PHY init
> >       dt-bindings: phy: qcom,qmp-usb: rename current bindings
> >       dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding
> >       phy: qcom-qmp-usb: restructure PHY creation
> >       phy: qcom-qmp-usb: add support for updated sc8280xp binding
> >       phy: qcom-qmp-pcie: sort device-id table
> >       phy: qcom-qmp-pcie: move device-id table
> >       phy: qcom-qmp-pcie: merge driver data
> >       phy: qcom-qmp-pcie: clean up device-tree parsing
> >       phy: qcom-qmp-pcie: clean up probe initialisation
> >       phy: qcom-qmp-pcie: rename PHY ops structure
> >       phy: qcom-qmp-pcie: clean up PHY lane init
> >       phy: qcom-qmp-pcie: use shorter tables identifiers
> >       phy: qcom-qmp-pcie: add register init helper
> >       dt-bindings: phy: qcom,qmp-pcie: rename current bindings
> >       dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings
> >       phy: qcom-qmp-pcie: restructure PHY creation
> >       phy: qcom-qmp-pcie: fix initialisation reset
> >       phy: qcom-qmp-pcie: add support for pipediv2 clock
> >       phy: qcom-qmp-pcie: add support for sc8280xp
> >       phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs
> >       phy: qcom-qmp-combo: fix out-of-bounds clock access
> >       phy: qcom-qmp-combo: fix sdm845 reset
> >       phy: qcom-qmp-combo: fix sc8180x reset
> >       phy: qcom-qmp-combo: fix broken power on
> >       phy: qcom-qmp-combo: fix runtime suspend
> >       phy: qcom-qmp-combo: clean up common initialisation
> >       phy: qcom-qmp-combo: sort device-id table
> >       phy: qcom-qmp-combo: move device-id table
> >       phy: qcom-qmp-combo: move pm ops
> >       phy: qcom-qmp-combo: rename PHY ops structures
> >       phy: qcom-qmp-combo: drop unused DP PHY mode op
> >       phy: qcom-qmp-combo: rename USB PHY ops
> >       phy: qcom-qmp-combo: drop unnecessary debug message
> >       phy: qcom-qmp-combo: separate USB and DP init ops
> >       phy: qcom-qmp-combo: rename DP PHY ops
> >       phy: qcom-qmp-combo: separate USB and DP power-on ops
> >       phy: qcom-qmp-combo: clean up serdes initialisation
> >       phy: qcom-qmp-combo: separate USB and DP devicetree parsing
> >       phy: qcom-qmp-combo: add dedicated DP iomem pointers
> >       phy: qcom-qmp-combo: clean up DP configurations
> >       phy: qcom-qmp-combo: rename sc8280xp config
> >       phy: qcom-qmp-combo: add DP configuration tables
> >       phy: qcom-qmp-combo: drop lanes config parameter
> >       phy: qcom-qmp-combo: merge USB and DP configurations
> >       phy: qcom-qmp-combo: merge driver data
> >       phy: qcom-qmp-combo: clean up device-tree parsing
> >       phy: qcom-qmp-combo: clean up probe initialisation
> >       phy: qcom-qmp-combo: clean up DP callback names
> >       dt-bindings: phy: qcom,qmp-usb3-dp: rename current bindings
> >       dt-bindings: phy: qcom,qmp-usb3-dp: fix sc8280xp binding
> >       phy: qcom-qmp-combo: drop v4 reference-clock source
> >       phy: qcom-qmp-combo: restructure PHY creation
> >       phy: qcom-qmp-combo: generate pipe clock name
> >       phy: qcom-qmp-combo: drop redundant clock structure
> >       phy: qcom-qmp-combo: drop redundant clock allocation
> >       phy: qcom-qmp-combo: add clock registration helper
> >       phy: qcom-qmp-combo: separate clock and provider registration
> >       phy: qcom-qmp-combo: clean up DP clock callbacks
> >       phy: qcom-qmp-combo: rename common-register pointers
> >       phy: qcom-qmp-combo: rename DP_PHY register pointer
> >       phy: qcom-qmp-combo: add support for updated sc8280xp binding
> >       dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source
> >       phy: qcom-qmp-usb: drop sc8280xp reference-clock source
> >       phy: qcom-qmp: drop unused type header
> >       phy: qcom-qmp-usb: drop redundant clock allocation
> >       phy: qcom-qmp-pcie: drop redundant clock allocation
> 
> Johan



-- 
~Vinod

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 112 bytes --]

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy