[PATCH 10/10] ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node

Shawn Guo
2021-09-29T03:43:35Z

'#clock-cells' is a required property of QMP PHY child node, not itself.
Drop it to fix the dtbs_check warnings below.

qcom-sdx55-t55.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
qcom-sdx55-mtp.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
qcom-sdx55-telit-fn980-tlb.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/boot/dts/qcom-sdx55.dtsi | 1 -
1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 1e6ce035f76a..44526ad9d210 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -228,7 +228,6 @@
compatible = "qcom,sdx55-qmp-usb3-uni-phy";
reg = <0x00ff6000 0x1c0>;
status = "disabled";
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;