From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org
Subject: Re: [PATCH 0/8] typec: mux: Introduce support for multiple TypeC muxes
Date: Tue, 28 Dec 2021 09:08:46 -0800 [thread overview]
Message-ID: <YctEnnH8FvS6zRPb@ripper> (raw)
In-Reply-To: <279c7bd8-c0bb-e58c-1149-d124102bf8b8@redhat.com>
On Tue 28 Dec 04:20 PST 2021, Hans de Goede wrote:
> Hi Bjorn,
>
> On 12/28/21 06:21, Bjorn Andersson wrote:
> > This series introduces a level of indirection between the controller's view of
> > a typec_mux/switch and the implementation and then expands that to support
> > multiple drivers.
> >
> > This is needed in order to support devices such as the Qualcomm Snapdragon 888
> > HDK, which does muxing and orientation handling in the QMP (USB+DP) PHY and SBU
> > muxing in the external FSA4480 chip.
> >
> > Additionally integration of typec mux and switch in the QMP PHY is included in
> > the series, as is the new FSA4480 driver. This is done to deal with the
> > renaming of the driver-side typec_mux -> typec_mux_dev.
> >
> > Bjorn Andersson (8):
> > dt-bindings: phy: qcom,qmp-usb3-dp: Add altmode/switch properties
> > phy: qcom-qmp: Register typec mux and orientation switch
> > device property: Helper to match multiple connections
> > device property: Use multi-connection matchers for single case
> > typec: mux: Introduce indirection
> > typec: mux: Allow multiple mux_devs per mux
> > dt-bindings: usb: Add binding for fcs,fsa4480
> > usb: typec: mux: Add On Semi fsa4480 driver
>
> Thank you for your series, I will leave commenting on the
> dt-bindings and typec-mux changes to others.
>
> But what I can do is test this on an x86 device using
> a pi3usb30532 mux for USB super-speed and DP-alt-mode
> muxing / orientation switching.
>
Thanks Hans, that would be much appreciated. I realize that I failed to
mention that I don't have this hardware, so I've not been able to test
it myself.
> I'm going to wait a bit with doing that till this has had
> some reviews and possibly also some newer versions because
> of those reviews. If you haven't received a Tested-by from me
> when this looks like it is ready for merging please ping me.
>
Will ping you when appropriate.
Thanks,
Bjorn
> Regards,
>
> Hans
>
>
> >
> > .../bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 14 +
> > .../devicetree/bindings/usb/fcs,fsa4480.yaml | 72 +++++
> > drivers/base/property.c | 83 ++++--
> > drivers/phy/qualcomm/phy-qcom-qmp.c | 176 ++++++++++--
> > drivers/usb/typec/bus.c | 2 +-
> > drivers/usb/typec/mux.c | 257 +++++++++++++-----
> > drivers/usb/typec/mux.h | 12 +-
> > drivers/usb/typec/mux/Kconfig | 9 +
> > drivers/usb/typec/mux/Makefile | 1 +
> > drivers/usb/typec/mux/fsa4480.c | 220 +++++++++++++++
> > drivers/usb/typec/mux/intel_pmc_mux.c | 8 +-
> > drivers/usb/typec/mux/pi3usb30532.c | 8 +-
> > include/linux/property.h | 5 +
> > include/linux/usb/typec_mux.h | 22 +-
> > 14 files changed, 762 insertions(+), 127 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
> > create mode 100644 drivers/usb/typec/mux/fsa4480.c
> >
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
prev parent reply other threads:[~2021-12-28 17:07 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-28 5:21 [PATCH 0/8] typec: mux: Introduce support for multiple TypeC muxes Bjorn Andersson
2021-12-28 5:21 ` [PATCH 1/8] dt-bindings: phy: qcom, qmp-usb3-dp: Add altmode/switch properties Bjorn Andersson
2021-12-28 5:21 ` [PATCH 2/8] phy: qcom-qmp: Register typec mux and orientation switch Bjorn Andersson
2021-12-28 12:25 ` Dmitry Baryshkov
2021-12-28 13:59 ` kernel test robot
2021-12-28 16:20 ` Bjorn Andersson
2021-12-29 5:27 ` Vinod Koul
2022-01-07 19:15 ` Bjorn Andersson
2021-12-28 5:21 ` [PATCH 3/8] device property: Helper to match multiple connections Bjorn Andersson
2021-12-28 13:09 ` Dmitry Baryshkov
2021-12-28 17:04 ` Bjorn Andersson
2021-12-28 18:24 ` Dmitry Baryshkov
2021-12-28 18:42 ` Bjorn Andersson
2021-12-29 5:40 ` Vinod Koul
2021-12-30 9:26 ` Heikki Krogerus
2021-12-31 9:09 ` Sakari Ailus
2022-01-05 20:43 ` Bjorn Andersson
2022-01-07 14:33 ` Sakari Ailus
2022-01-07 15:15 ` Bjorn Andersson
2021-12-28 5:21 ` [PATCH 4/8] device property: Use multi-connection matchers for single case Bjorn Andersson
2021-12-28 5:21 ` [PATCH 5/8] typec: mux: Introduce indirection Bjorn Andersson
2021-12-28 5:21 ` [PATCH 6/8] typec: mux: Allow multiple mux_devs per mux Bjorn Andersson
2021-12-28 16:04 ` Dmitry Baryshkov
2021-12-28 16:40 ` Bjorn Andersson
2022-01-06 10:43 ` Dan Carpenter
2021-12-28 5:21 ` [PATCH 7/8] dt-bindings: usb: Add binding for fcs,fsa4480 Bjorn Andersson
2021-12-28 5:21 ` [PATCH 8/8] usb: typec: mux: Add On Semi fsa4480 driver Bjorn Andersson
2021-12-28 12:20 ` [PATCH 0/8] typec: mux: Introduce support for multiple TypeC muxes Hans de Goede
2021-12-28 17:08 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YctEnnH8FvS6zRPb@ripper \
--to=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).