From: Vinod Koul <vkoul@kernel.org>
To: "Marek Behún" <kabel@kernel.org>
Cc: linux-phy@lists.infradead.org,
Kishon Vijay Abraham I <kishon@ti.com>,
pali@kernel.org, Miquel Raynal <miquel.raynal@bootlin.com>,
Gregory CLEMENT <gregory.clement@bootlin.com>
Subject: Re: [PATCH phy v3 0/5] Armada 3720 comphy native implementation
Date: Thu, 27 Jan 2022 10:57:30 +0530 [thread overview]
Message-ID: <YfItQmAizb8h9BqG@matsya> (raw)
In-Reply-To: <20220117155851.5759b337@thinkpad>
On 17-01-22, 15:58, Marek Behún wrote:
> Dear Vinod,
>
> did you find time to look at this series?
Pls do not top post!
This came in just before merge window, I dont pick patches during that
time. rc1 came this monday, so this is in queue...
>
> Marek
>
> On Mon, 3 Jan 2022 15:32:15 +0100
> Marek Behún <kabel@kernel.org> wrote:
>
> > Hello Vinod,
> >
> > this is v3 of series converting A3720 comphy to native kernel
> > implementation.
> >
> > Tested on Turris MOX and ESPRESSObin (tested all supported PHY modes:
> > ethernet, PCIe, USB3, SATA).
> >
> > Changes since v2:
> > - removed device-tree changing patch, Gregory applied it on mvebu/dt64
> > - changed raw spin lock to ordinary spin lock
> > - fixed indentation of gbe_phy_init_fix
> > - use FIELD_PREP() macro
> >
> > Changes since v1 (all changes in patch 2/6):
> > - refactored to use GENMASK()
> > - fixed various register names to conform to Functional Specification
> > - refactored various register names to have uniform naming
> > - refactored register access into one function, which decides whether
> > the access should be direct or indirect, so as to not have all these
> > checks done everywhere in the code
> > - moved around one register definition to have the registers sorted
> > according to their offset
> > - added comments to some register definitions
> > - added support for PHY reset() method
> > - when changing PHY mode, the driver now resets the PHY and its
> > registers to put the PHY in known state
> > - fixed the power_off() method
> > - added spinlock guard when accessing PHY Selector register, since it
> > is shared between the PHYs and so the PHY mutex is insufficient
> > - upon driver probe changed the calls to power_off() to reset()
> >
> >
> > The original cover letter said:
> >
> > The RPC calling to ARM Trusted Firmware implementation of Armada 3720
> > comphy driver caused quite a number of issues (explained more in patch 2).
> >
> > This series fixes those issues by reimplementing the driver to native
> > kernel implementation.
> >
> > The last 3 commits revert commits in AHCI, USB, and PCI drivers, that were
> > introduced there because of those issues.
> >
> > Pali Rohár (5):
> > phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver
> > configuration
> > phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation
> > Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720"
> > Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada
> > 3720"
> > Revert "PCI: aardvark: Fix initialization with old Marvell's Arm
> > Trusted Firmware"
> >
> > drivers/ata/ahci.h | 2 -
> > drivers/ata/ahci_mvebu.c | 2 +-
> > drivers/ata/libahci_platform.c | 2 +-
> > drivers/pci/controller/pci-aardvark.c | 4 +-
> > drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 1369 ++++++++++++++++--
> > drivers/usb/host/xhci-mvebu.c | 42 -
> > drivers/usb/host/xhci-mvebu.h | 6 -
> > drivers/usb/host/xhci-plat.c | 20 +-
> > drivers/usb/host/xhci-plat.h | 1 -
> > 9 files changed, 1245 insertions(+), 203 deletions(-)
> >
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
prev parent reply other threads:[~2022-01-27 5:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-03 14:32 [PATCH phy v3 0/5] Armada 3720 comphy native implementation Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 1/5] phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver configuration Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 2/5] phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation Marek Behún
2022-02-02 15:52 ` Vinod Koul
2022-02-03 21:39 ` Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 3/5] Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720" Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 4/5] Revert "usb: host: xhci: mvebu: make USB 3.0 " Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 5/5] Revert "PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware" Marek Behún
2022-01-17 14:58 ` [PATCH phy v3 0/5] Armada 3720 comphy native implementation Marek Behún
2022-01-27 5:27 ` Vinod Koul [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YfItQmAizb8h9BqG@matsya \
--to=vkoul@kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=kabel@kernel.org \
--cc=kishon@ti.com \
--cc=linux-phy@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=pali@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox