From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 9BDBDCD11DD for ; Thu, 28 Mar 2024 18:53:01 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:Cc:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=c65rCQx2rcpMltZpFRiTIlY7tSmDL/KoBlnZIWam9ig=; b=NwHg6F0HWKMRUX tPaDxNLryEE2ElSrnk2PWiJOE3yi+sVigZ5TGAEDhv8sqbRT9u8rFIpWpdxc3F4ch+fPEVWK5xmh7 WRBA1nMOSPJtAkmZ9t9F0kaGDB1Ky4PeUjhTO3F5tMSEmhEBqy9mT9OZ52W0Xm022ByqXjyGEDCvh JGGCUQLjkdtVpv06ZbTqMjgi3p5x3/nF3tyhNleoCu9hr0r2emUqwynulyjfaS09nw0QXy3SAoTav uyX6GadmDjxiTdKoSH2WXwJ/7Er7UjZzNvXTx3iSFmlCvW0SDlJX7M/B5ZCdakv2moeeHILem0rNL 9o/1Y0NDBtvOKxYY65zg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1rpus1-0000000FGRN-0pdh; Thu, 28 Mar 2024 18:53:01 +0000 Received: from sin.source.kernel.org ([2604:1380:40e1:4800::1]) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1rpurw-0000000FGQO-11C8; Thu, 28 Mar 2024 18:52:58 +0000 Received: from smtp.kernel.org (transwarp.subspace.kernel.org [100.75.92.58]) by sin.source.kernel.org (Postfix) with ESMTP id 3AD98CE2B97; Thu, 28 Mar 2024 18:52:54 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 65986C433F1; Thu, 28 Mar 2024 18:52:52 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1711651973; bh=VQuItncSv2/7u3hNnw8Sx3rsesZgwr1DE28XKpxLW9o=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=XEro7eKjs1IOkaDygoejdFYG98trXSnUjPd9wFHScDHZkxe9x1DK8ecJZrM5+siRx NqoDLi+wn6zCw8l+TWKLzYNzAkNgYYwyfMt1/5aW4f0tJKxRqyoNNiczQ+QjPZc4Pd tzV9M1KEyJh5zNqkjZzO72MRrOxCTwuzld+yD2K2vbUuScXEOmwgtXfJNIUdNAexDq Vpiz4hH7cFJ5oM9j5qARyNXS0Sanfg0k39UK+Z0jjGjXmi8SyiER+rwddx3Agl8nx8 gnjlIV3pli5rA7isJ1LYnbdSCVaJELrOTiVyYj4CISLKdEz5QIZo4uyy5u1s5veJC3 ewUXg3PFWrFNw== Date: Fri, 29 Mar 2024 00:22:47 +0530 From: Vinod Koul To: Daniel Golle Cc: Bc-bocun Chen , Steven Liu , John Crispin , Chunfeng Yun , Kishon Vijay Abraham I , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Matthias Brugger , AngeloGioacchino Del Regno , Qingfang Deng , SkyLake Huang , Philipp Zabel , linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org Subject: Re: [PATCH v3 2/2] phy: add driver for MediaTek XFI T-PHY Message-ID: References: <745f8b46f676e94c1a396df8c46aefe0e8b4771c.1707530671.git.daniel@makrotopia.org> <3bb95f1d795eede63284dbcb224e06ea6886b421.1707530671.git.daniel@makrotopia.org> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <3bb95f1d795eede63284dbcb224e06ea6886b421.1707530671.git.daniel@makrotopia.org> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240328_115256_680740_456B2354 X-CRM114-Status: GOOD ( 37.25 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org On 10-02-24, 02:10, Daniel Golle wrote: > Add driver for MediaTek's XFI T-PHY which can be found in the MT7988 What does XFI mean? > SoC. The XFI T-PHY is a 10 Gigabit/s Ethernet SerDes PHY with muxes on > the internal side to be used with either USXGMII PCS or LynxI PCS, > depending on the selected PHY interface mode. > > The PHY can operates only in PHY_MODE_ETHERNET, the submode is one of > PHY_INTERFACE_MODE_* corresponding to the supported modes: > > * USXGMII \ > * 10GBase-R }- USXGMII PCS - XGDM \ > * 5GBase-R / \ > }- Ethernet MAC > * 2500Base-X \ / > * 1000Base-X }- LynxI PCS - GDM / > * Cisco SGMII (MAC side) / > > In order to work-around a performance issue present on the first of > two XFI T-PHYs present in MT7988, special tuning is applied which can be > selected by adding the 'mediatek,usxgmii-performance-errata' property to > the device tree node. > > There is no documentation for most registers used for the > analog/tuning part, however, most of the registers have been partially > reverse-engineered from MediaTek's SDK implementation (an opaque > sequence of 32-bit register writes) and descriptions for all relevant > digital registers and bits such as resets and muxes have been supplied > by MediaTek. > > Signed-off-by: Daniel Golle > Reviewed-by: AngeloGioacchino Del Regno > --- > v3: no changes > v2: > * use IO helpers from mtk-io.h instead of rolling my own > * use devm_clk_bulk_get() > * yse devm_platform_ioremap_resource() > * unify name and description everywhere > * invert bool is_xgmii into bool use_lynxi_pcs and add comments > describing the meaning of each of the stack variables > * not much we can do about remaining magic values unless MTK provides > definitions for them > > > MAINTAINERS | 1 + > drivers/phy/mediatek/Kconfig | 12 + > drivers/phy/mediatek/Makefile | 1 + > drivers/phy/mediatek/phy-mtk-xfi-tphy.c | 360 ++++++++++++++++++++++++ > 4 files changed, 374 insertions(+) > create mode 100644 drivers/phy/mediatek/phy-mtk-xfi-tphy.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 4be2fd097f261..616b86e3e62fd 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -13776,6 +13776,7 @@ L: netdev@vger.kernel.org > S: Maintained > F: drivers/net/phy/mediatek-ge-soc.c > F: drivers/net/phy/mediatek-ge.c > +F: drivers/phy/mediatek/phy-mtk-xfi-tphy.c > > MEDIATEK I2C CONTROLLER DRIVER > M: Qii Wang > diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig > index 3849b7c87d287..117d0e84c7360 100644 > --- a/drivers/phy/mediatek/Kconfig > +++ b/drivers/phy/mediatek/Kconfig > @@ -13,6 +13,18 @@ config PHY_MTK_PCIE > callback for PCIe GEN3 port, it supports software efuse > initialization. > > +config PHY_MTK_XFI_TPHY > + tristate "MediaTek 10GE SerDes XFI T-PHY driver" > + depends on ARCH_MEDIATEK || COMPILE_TEST > + depends on OF && OF_ADDRESS why both, is OF not enough? > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Say 'Y' here to add support for MediaTek XFI T-PHY driver. > + The driver provides access to the Ethernet SerDes T-PHY supporting > + 1GE and 2.5GE modes via the LynxI PCS, and 5GE and 10GE modes > + via the USXGMII PCS found in MediaTek SoCs with 10G Ethernet. > + > config PHY_MTK_TPHY > tristate "MediaTek T-PHY Driver" > depends on ARCH_MEDIATEK || COMPILE_TEST > diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile > index f6e24a47e0815..1b8088df71e84 100644 > --- a/drivers/phy/mediatek/Makefile > +++ b/drivers/phy/mediatek/Makefile > @@ -8,6 +8,7 @@ obj-$(CONFIG_PHY_MTK_PCIE) += phy-mtk-pcie.o > obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o > obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o > obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o > +obj-$(CONFIG_PHY_MTK_XFI_TPHY) += phy-mtk-xfi-tphy.o > > phy-mtk-hdmi-drv-y := phy-mtk-hdmi.o > phy-mtk-hdmi-drv-y += phy-mtk-hdmi-mt2701.o > diff --git a/drivers/phy/mediatek/phy-mtk-xfi-tphy.c b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c > new file mode 100644 > index 0000000000000..551d6cee33f94 > --- /dev/null > +++ b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c > @@ -0,0 +1,360 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* MediaTek 10GE SerDes XFI T-PHY driver > + * > + * Copyright (c) 2024 Daniel Golle > + * Bc-bocun Chen > + * based on mtk_usxgmii.c and mtk_sgmii.c found in MediaTek's SDK (GPL-2.0) > + * Copyright (c) 2022 MediaTek Inc. > + * Author: Henry Yen > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "phy-mtk-io.h" > + > +#define MTK_XFI_TPHY_NUM_CLOCKS 2 > + > +#define REG_DIG_GLB_70 0x0070 > +#define XTP_PCS_RX_EQ_IN_PROGRESS(x) FIELD_PREP(GENMASK(25, 24), (x)) > +#define XTP_PCS_MODE_MASK GENMASK(17, 16) > +#define XTP_PCS_MODE(x) FIELD_PREP(GENMASK(17, 16), (x)) > +#define XTP_PCS_RST_B BIT(15) > +#define XTP_FRC_PCS_RST_B BIT(14) > +#define XTP_PCS_PWD_SYNC_MASK GENMASK(13, 12) > +#define XTP_PCS_PWD_SYNC(x) FIELD_PREP(XTP_PCS_PWD_SYNC_MASK, (x)) > +#define XTP_PCS_PWD_ASYNC_MASK GENMASK(11, 10) > +#define XTP_PCS_PWD_ASYNC(x) FIELD_PREP(XTP_PCS_PWD_ASYNC_MASK, (x)) > +#define XTP_FRC_PCS_PWD_ASYNC BIT(8) > +#define XTP_PCS_UPDT BIT(4) > +#define XTP_PCS_IN_FR_RG BIT(0) > + > +#define REG_DIG_GLB_F4 0x00f4 > +#define XFI_DPHY_PCS_SEL BIT(0) > +#define XFI_DPHY_PCS_SEL_SGMII FIELD_PREP(XFI_DPHY_PCS_SEL, 1) > +#define XFI_DPHY_PCS_SEL_USXGMII FIELD_PREP(XFI_DPHY_PCS_SEL, 0) > +#define XFI_DPHY_AD_SGDT_FRC_EN BIT(5) > + > +#define REG_DIG_LN_TRX_40 0x3040 > +#define XTP_LN_FRC_TX_DATA_EN BIT(29) > +#define XTP_LN_TX_DATA_EN BIT(28) > + > +#define REG_DIG_LN_TRX_B0 0x30b0 > +#define XTP_LN_FRC_TX_MACCK_EN BIT(5) > +#define XTP_LN_TX_MACCK_EN BIT(4) > + > +#define REG_ANA_GLB_D0 0x90d0 > +#define XTP_GLB_USXGMII_SEL_MASK GENMASK(3, 1) > +#define XTP_GLB_USXGMII_SEL(x) FIELD_PREP(GENMASK(3, 1), (x)) > +#define XTP_GLB_USXGMII_EN BIT(0) > + > +struct mtk_xfi_tphy { > + void __iomem *base; > + struct device *dev; > + struct reset_control *reset; > + struct clk_bulk_data clocks[MTK_XFI_TPHY_NUM_CLOCKS]; > + bool da_war; > +}; > + > +static void mtk_xfi_tphy_setup(struct mtk_xfi_tphy *xfi_tphy, > + phy_interface_t interface) > +{ > + /* Override 10GBase-R tuning value if work-around is selected */ > + bool da_war = (xfi_tphy->da_war && (interface == PHY_INTERFACE_MODE_10GBASER)); why do you need braces around this? > + /* Bools to make setting up values for specific PHY speeds easier */ > + bool is_2p5g = (interface == PHY_INTERFACE_MODE_2500BASEX); > + bool is_1g = (interface == PHY_INTERFACE_MODE_1000BASEX || > + interface == PHY_INTERFACE_MODE_SGMII); > + bool is_10g = (interface == PHY_INTERFACE_MODE_10GBASER || > + interface == PHY_INTERFACE_MODE_USXGMII); > + bool is_5g = (interface == PHY_INTERFACE_MODE_5GBASER); > + /* Bool to configure input mux to either > + * - USXGMII PCS (64b/66b coding) for 5G/10G > + * - LynxI PCS (8b/10b coding) for 1G/2.5G > + */ > + bool use_lynxi_pcs = (is_1g || is_2p5g); This is quite terrible to read, how about declaring variables first and then doing the initialization? > + > + dev_dbg(xfi_tphy->dev, "setting up for mode %s\n", phy_modes(interface)); > + > + /* Setup PLL setting */ > + mtk_phy_update_bits(xfi_tphy->base + 0x9024, 0x100000, is_10g ? 0x0 : 0x100000); > + mtk_phy_update_bits(xfi_tphy->base + 0x2020, 0x202000, is_5g ? 0x202000 : 0x0); > + mtk_phy_update_bits(xfi_tphy->base + 0x2030, 0x500, is_1g ? 0x0 : 0x500); > + mtk_phy_update_bits(xfi_tphy->base + 0x2034, 0xa00, is_1g ? 0x0 : 0xa00); > + mtk_phy_update_bits(xfi_tphy->base + 0x2040, 0x340000, is_1g ? 0x200000 : 0x140000); magic numbers? > + > + /* Setup RXFE BW setting */ > + mtk_phy_update_bits(xfi_tphy->base + 0x50f0, 0xc10, is_1g ? 0x410 : is_5g ? 0x800 : 0x400); > + mtk_phy_update_bits(xfi_tphy->base + 0x50e0, 0x4000, is_5g ? 0x0 : 0x4000); > + > + /* Setup RX CDR setting */ > + mtk_phy_update_bits(xfi_tphy->base + 0x506c, 0x30000, is_5g ? 0x0 : 0x30000); > + mtk_phy_update_bits(xfi_tphy->base + 0x5070, 0x670000, is_5g ? 0x620000 : 0x50000); > + mtk_phy_update_bits(xfi_tphy->base + 0x5074, 0x180000, is_5g ? 0x180000 : 0x0); > + mtk_phy_update_bits(xfi_tphy->base + 0x5078, 0xf000400, is_5g ? 0x8000000 : > + 0x7000400); > + mtk_phy_update_bits(xfi_tphy->base + 0x507c, 0x5000500, is_5g ? 0x4000400 : > + 0x1000100); > + mtk_phy_update_bits(xfi_tphy->base + 0x5080, 0x1410, is_1g ? 0x400 : is_5g ? 0x1010 : 0x0); > + mtk_phy_update_bits(xfi_tphy->base + 0x5084, 0x30300, is_1g ? 0x30300 : > + is_5g ? 0x30100 : > + 0x100); > + mtk_phy_update_bits(xfi_tphy->base + 0x5088, 0x60200, is_1g ? 0x20200 : > + is_5g ? 0x40000 : > + 0x20000); > + > + /* Setting RXFE adaptation range setting */ > + mtk_phy_update_bits(xfi_tphy->base + 0x50e4, 0xc0000, is_5g ? 0x0 : 0xc0000); > + mtk_phy_update_bits(xfi_tphy->base + 0x50e8, 0x40000, is_5g ? 0x0 : 0x40000); > + mtk_phy_update_bits(xfi_tphy->base + 0x50ec, 0xa00, is_1g ? 0x200 : 0x800); > + mtk_phy_update_bits(xfi_tphy->base + 0x50a8, 0xee0000, is_5g ? 0x800000 : > + 0x6e0000); > + mtk_phy_update_bits(xfi_tphy->base + 0x6004, 0x190000, is_5g ? 0x0 : 0x190000); > + > + if (is_10g) > + writel(0x01423342, xfi_tphy->base + 0x00f8); > + else if (is_5g) > + writel(0x00a132a1, xfi_tphy->base + 0x00f8); > + else if (is_2p5g) > + writel(0x009c329c, xfi_tphy->base + 0x00f8); > + else > + writel(0x00fa32fa, xfi_tphy->base + 0x00f8); > + > + /* Force SGDT_OUT off and select PCS */ > + mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_F4, > + XFI_DPHY_AD_SGDT_FRC_EN | XFI_DPHY_PCS_SEL, > + XFI_DPHY_AD_SGDT_FRC_EN | > + (use_lynxi_pcs ? XFI_DPHY_PCS_SEL_SGMII : > + XFI_DPHY_PCS_SEL_USXGMII)); > + > + /* Force GLB_CKDET_OUT */ > + mtk_phy_set_bits(xfi_tphy->base + 0x0030, 0xc00); > + > + /* Force AEQ on */ > + writel(XTP_PCS_RX_EQ_IN_PROGRESS(2) | XTP_PCS_PWD_SYNC(2) | XTP_PCS_PWD_ASYNC(2), > + xfi_tphy->base + REG_DIG_GLB_70); > + > + usleep_range(1, 5); > + > + /* Setup TX DA default value */ > + mtk_phy_update_bits(xfi_tphy->base + 0x30b0, 0x30, 0x20); > + writel(0x00008a01, xfi_tphy->base + 0x3028); > + writel(0x0000a884, xfi_tphy->base + 0x302c); > + writel(0x00083002, xfi_tphy->base + 0x3024); > + > + /* Setup RG default value */ > + if (use_lynxi_pcs) { > + writel(0x00011110, xfi_tphy->base + 0x3010); > + writel(0x40704000, xfi_tphy->base + 0x3048); > + } else { > + writel(0x00022220, xfi_tphy->base + 0x3010); > + writel(0x0f020a01, xfi_tphy->base + 0x5064); > + writel(0x06100600, xfi_tphy->base + 0x50b4); > + if (interface == PHY_INTERFACE_MODE_USXGMII) > + writel(0x40704000, xfi_tphy->base + 0x3048); > + else > + writel(0x47684100, xfi_tphy->base + 0x3048); > + } > + > + if (is_1g) > + writel(0x0000c000, xfi_tphy->base + 0x3064); > + > + /* Setup RX EQ initial value */ > + mtk_phy_update_bits(xfi_tphy->base + 0x3050, 0xa8000000, > + (interface != PHY_INTERFACE_MODE_10GBASER) ? 0xa8000000 : 0x0); > + mtk_phy_update_bits(xfi_tphy->base + 0x3054, 0xaa, > + (interface != PHY_INTERFACE_MODE_10GBASER) ? 0xaa : 0x0); > + > + if (!use_lynxi_pcs) > + writel(0x00000f00, xfi_tphy->base + 0x306c); > + else if (is_2p5g) > + writel(0x22000f00, xfi_tphy->base + 0x306c); > + else > + writel(0x20200f00, xfi_tphy->base + 0x306c); > + > + mtk_phy_update_bits(xfi_tphy->base + 0xa008, 0x10000, da_war ? 0x10000 : 0x0); > + > + mtk_phy_update_bits(xfi_tphy->base + 0xa060, 0x50000, use_lynxi_pcs ? 0x50000 : 0x40000); > + > + /* Setup PHYA speed */ > + mtk_phy_update_bits(xfi_tphy->base + REG_ANA_GLB_D0, > + XTP_GLB_USXGMII_SEL_MASK | XTP_GLB_USXGMII_EN, > + is_10g ? XTP_GLB_USXGMII_SEL(0) : > + is_5g ? XTP_GLB_USXGMII_SEL(1) : > + is_2p5g ? XTP_GLB_USXGMII_SEL(2) : > + XTP_GLB_USXGMII_SEL(3)); > + mtk_phy_set_bits(xfi_tphy->base + REG_ANA_GLB_D0, XTP_GLB_USXGMII_EN); > + > + /* Release reset */ > + mtk_phy_set_bits(xfi_tphy->base + REG_DIG_GLB_70, > + XTP_PCS_RST_B | XTP_FRC_PCS_RST_B); > + usleep_range(150, 500); > + > + /* Switch to P0 */ > + mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70, > + XTP_PCS_IN_FR_RG | > + XTP_FRC_PCS_PWD_ASYNC | > + XTP_PCS_PWD_ASYNC_MASK | > + XTP_PCS_PWD_SYNC_MASK | > + XTP_PCS_UPDT, > + XTP_PCS_IN_FR_RG | > + XTP_FRC_PCS_PWD_ASYNC | > + XTP_PCS_UPDT); > + usleep_range(1, 5); > + > + mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_70, XTP_PCS_UPDT); > + usleep_range(15, 50); > + > + if (use_lynxi_pcs) { > + /* Switch to Gen2 */ > + mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70, > + XTP_PCS_MODE_MASK | XTP_PCS_UPDT, > + XTP_PCS_MODE(1) | XTP_PCS_UPDT); > + } else { > + /* Switch to Gen3 */ > + mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70, > + XTP_PCS_MODE_MASK | XTP_PCS_UPDT, > + XTP_PCS_MODE(2) | XTP_PCS_UPDT); > + } > + usleep_range(1, 5); > + > + mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_70, XTP_PCS_UPDT); > + > + usleep_range(100, 500); > + > + /* Enable MAC CK */ > + mtk_phy_set_bits(xfi_tphy->base + REG_DIG_LN_TRX_B0, XTP_LN_TX_MACCK_EN); > + mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_F4, XFI_DPHY_AD_SGDT_FRC_EN); > + > + /* Enable TX data */ > + mtk_phy_set_bits(xfi_tphy->base + REG_DIG_LN_TRX_40, > + XTP_LN_FRC_TX_DATA_EN | XTP_LN_TX_DATA_EN); > + usleep_range(400, 1000); > +} > + > +static int mtk_xfi_tphy_set_mode(struct phy *phy, enum phy_mode mode, int > + submode) > +{ > + struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy); > + > + if (mode != PHY_MODE_ETHERNET) > + return -EINVAL; > + > + switch (submode) { > + case PHY_INTERFACE_MODE_1000BASEX: > + case PHY_INTERFACE_MODE_2500BASEX: > + case PHY_INTERFACE_MODE_SGMII: > + case PHY_INTERFACE_MODE_5GBASER: > + case PHY_INTERFACE_MODE_10GBASER: > + case PHY_INTERFACE_MODE_USXGMII: > + mtk_xfi_tphy_setup(xfi_tphy, submode); > + return 0; > + default: > + return -EINVAL; > + } > +} > + > +static int mtk_xfi_tphy_reset(struct phy *phy) > +{ > + struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy); > + > + reset_control_assert(xfi_tphy->reset); > + usleep_range(100, 500); > + reset_control_deassert(xfi_tphy->reset); > + usleep_range(1, 10); > + > + return 0; > +} > + > +static int mtk_xfi_tphy_power_on(struct phy *phy) > +{ > + struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy); > + > + return clk_bulk_prepare_enable(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks); > +} > + > +static int mtk_xfi_tphy_power_off(struct phy *phy) > +{ > + struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy); > + > + clk_bulk_disable_unprepare(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks); > + > + return 0; > +} > + > +static const struct phy_ops mtk_xfi_tphy_ops = { > + .power_on = mtk_xfi_tphy_power_on, > + .power_off = mtk_xfi_tphy_power_off, > + .set_mode = mtk_xfi_tphy_set_mode, > + .reset = mtk_xfi_tphy_reset, > + .owner = THIS_MODULE, > +}; > + > +static int mtk_xfi_tphy_probe(struct platform_device *pdev) > +{ > + struct device_node *np = pdev->dev.of_node; > + struct phy_provider *phy_provider; > + struct mtk_xfi_tphy *xfi_tphy; > + struct phy *phy; > + int ret; > + > + if (!np) > + return -ENODEV; > + > + xfi_tphy = devm_kzalloc(&pdev->dev, sizeof(*xfi_tphy), GFP_KERNEL); > + if (!xfi_tphy) > + return -ENOMEM; > + > + xfi_tphy->base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(xfi_tphy->base)) > + return PTR_ERR(xfi_tphy->base); > + > + xfi_tphy->dev = &pdev->dev; > + xfi_tphy->clocks[0].id = "topxtal"; > + xfi_tphy->clocks[1].id = "xfipll"; > + ret = devm_clk_bulk_get(&pdev->dev, MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks); > + if (ret) > + return ret; > + > + xfi_tphy->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL); > + if (IS_ERR(xfi_tphy->reset)) > + return PTR_ERR(xfi_tphy->reset); > + > + xfi_tphy->da_war = of_property_read_bool(np, "mediatek,usxgmii-performance-errata"); > + > + phy = devm_phy_create(&pdev->dev, NULL, &mtk_xfi_tphy_ops); > + if (IS_ERR(phy)) > + return PTR_ERR(phy); > + > + phy_set_drvdata(phy, xfi_tphy); > + phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); > + > + return PTR_ERR_OR_ZERO(phy_provider); > +} > + > +static const struct of_device_id mtk_xfi_tphy_match[] = { > + { .compatible = "mediatek,mt7988-xfi-tphy", }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, mtk_xfi_tphy_match); > + > +static struct platform_driver mtk_xfi_tphy_driver = { > + .probe = mtk_xfi_tphy_probe, > + .driver = { > + .name = "mtk-xfi-tphy", > + .of_match_table = mtk_xfi_tphy_match, > + }, > +}; > +module_platform_driver(mtk_xfi_tphy_driver); > + > +MODULE_DESCRIPTION("MediaTek 10GE SerDes XFI T-PHY driver"); > +MODULE_AUTHOR("Daniel Golle "); > +MODULE_AUTHOR("Bc-bocun Chen "); > +MODULE_LICENSE("GPL"); > -- > 2.43.0 -- ~Vinod -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy