[PATCH 0/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051

[PATCH 0/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051

[Maud Spierings via B4 Relay]

The Moduline Display mainboard contains 2 TI TCAN1051 CAN transceivers,
properly document these and add them to the devicetree.

Thank Peng Fan for inspiring this patch series.

Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
---
Maud Spierings (2):
      dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051
      arm64: dts: freescale: imx8mp-moduline-display-106: Use phys to replace xceiver-supply

 .../devicetree/bindings/phy/ti,tcan104x-can.yaml   |  1 +
 .../imx8mp-tx8p-ml81-moduline-display-106.dts      | 46 +++++++++++-----------
 2 files changed, 23 insertions(+), 24 deletions(-)
---
base-commit: 0f4c93f7eb861acab537dbe94441817a270537bf
change-id: 20250822-can_phy3-542f5144c9e5

Best regards,
-- 
Maud Spierings <maudspierings@gocontroll.com>



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051

[Maud Spierings via B4 Relay]

From: Maud Spierings <maudspierings@gocontroll.com>

TCAN1051-Q1 Automotive Fault Protected CAN Transceiver with CAN FD

It is pretty much identical to the TCAN1042, add the compatible with
fallback on the TCAN1042.

Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
---
 Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
index 4a8c3829d85d3c4a4963750d03567c1c345beb91..138923ffedfeeb6a0b391cae863723ec70bf2c88 100644
--- a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
@@ -18,6 +18,7 @@ properties:
       - items:
           - enum:
               - microchip,ata6561
+              - ti,tcan1051
           - const: ti,tcan1042
       - enum:
           - ti,tcan1042

-- 
2.50.1



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051

[Conor Dooley]

[-- Attachment #1.1: Type: text/plain, Size: 52 bytes --]

Acked-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 112 bytes --]

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 2/2] arm64: dts: freescale: imx8mp-moduline-display-106: Use phys to replace xceiver-supply

[Maud Spierings via B4 Relay]

From: Maud Spierings <maudspierings@gocontroll.com>

Fix the can tranceivers to actually use the new phy description instead
of the regulator tweak.

Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
---
 .../imx8mp-tx8p-ml81-moduline-display-106.dts      | 46 +++++++++++-----------
 1 file changed, 22 insertions(+), 24 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
index afd886dd590ff6f125d1d0e91aa71ae0063b5fd1..88ad422c27603b77c1099f2efe61953999c35f77 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
@@ -36,6 +36,24 @@ external-sensor-supply {
 		vout-supply = <&reg_5v0_sensor>;
 	};
 
+	flexcan1_phy: can-phy0 {
+		compatible = "ti,tcan1051", "ti,tcan1042";
+		#phy-cells = <0>;
+		pinctrl-0 = <&pinctrl_flexcan1_stby>;
+		pinctrl-names = "default";
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	flexcan2_phy: can-phy1 {
+		compatible = "ti,tcan1051", "ti,tcan1042";
+		#phy-cells = <0>;
+		pinctrl-0 = <&pinctrl_flexcan2_stby>;
+		pinctrl-names = "default";
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+	};
+
 	reg_1v8_per: regulator-1v8-per {
 		compatible = "regulator-fixed";
 		pinctrl-0 = <&pinctrl_reg_1v8>;
@@ -85,26 +103,6 @@ reg_6v4: regulator-6v4 {
 		regulator-name = "6v4";
 	};
 
-	reg_can1_stby: regulator-can1-stby {
-		compatible = "regulator-fixed";
-		pinctrl-0 = <&pinctrl_flexcan1_reg>;
-		pinctrl-names = "default";
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "can1-stby";
-		gpio = <&gpio4 3 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_can2_stby: regulator-can2-stby {
-		compatible = "regulator-fixed";
-		pinctrl-0 = <&pinctrl_flexcan2_reg>;
-		pinctrl-names = "default";
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "can2-stby";
-		gpio = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	};
-
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,bitclock-master = <&cpudai>;
@@ -180,16 +178,16 @@ adc@2 {
 };
 
 &flexcan1 {
+	phys = <&flexcan1_phy>;
 	pinctrl-0 = <&pinctrl_flexcan1>;
 	pinctrl-names = "default";
-	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
 &flexcan2 {
+	phys = <&flexcan2_phy>;
 	pinctrl-0 = <&pinctrl_flexcan2>;
 	pinctrl-names = "default";
-	xceiver-supply = <&reg_can2_stby>;
 	status = "okay";
 };
 
@@ -278,7 +276,7 @@ MX8MP_IOMUXC_SPDIF_TX__CAN1_TX
 		>;
 	};
 
-	pinctrl_flexcan1_reg: flexcan1reggrp {
+	pinctrl_flexcan1_stby: flexcan1stbygrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03
 				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
@@ -294,7 +292,7 @@ MX8MP_IOMUXC_UART3_RXD__CAN2_TX
 		>;
 	};
 
-	pinctrl_flexcan2_reg: flexcan2reggrp {
+	pinctrl_flexcan2_stby: flexcan2stbygrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09
 				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)

-- 
2.50.1



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 2/2] arm64: dts: freescale: imx8mp-moduline-display-106: Use phys to replace xceiver-supply

[Shawn Guo]

On Fri, Aug 22, 2025 at 11:20:06AM +0200, Maud Spierings via B4 Relay wrote:
> From: Maud Spierings <maudspierings@gocontroll.com>
> 
> Fix the can tranceivers to actually use the new phy description instead
> of the regulator tweak.
> 
> Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>

Applied, thanks!


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: (subset) [PATCH 0/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051

[Vinod Koul]

On Fri, 22 Aug 2025 11:20:04 +0200, Maud Spierings wrote:
> The Moduline Display mainboard contains 2 TI TCAN1051 CAN transceivers,
> properly document these and add them to the devicetree.
> 
> Thank Peng Fan for inspiring this patch series.
> 
> 

Applied, thanks!

[1/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051
      commit: 3d13e378d465e8ae0be1697005342055b07eaf11

Best regards,
-- 
~Vinod



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy