Re: [PATCH 3/3] phy: k1-usb: k3: add USB2 PHY support

[Yao Zi <me@ziyao.cc>]

On Thu, Feb 12, 2026 at 09:38:56AM +0800, Yixun Lan wrote:
> Add USB2 PHY support for SpacemiT K3 SoC.
> 
> Register layout of handling USB disconnect operation has been changed,
> So introducing a platform data to distinguish the different SoCs.

Would it be clearer and simpler if you define separate phy_ops for
k1 and k3, and point of_device_id.data directly to the corresponding
phy_ops? Then there's no need to introduce either spacemit_usb2phy_data
structure, or spacemit_usb2phy_disconnect wrapper.

Best regards,
Yao Zi

> Signed-off-by: Yixun Lan <dlan@kernel.org>
> ---
>  drivers/phy/spacemit/phy-k1-usb2.c | 40 ++++++++++++++++++++++++++++++++++++--
>  1 file changed, 38 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c
> index 959bf79c7a72..b0ce0a92861e 100644
> --- a/drivers/phy/spacemit/phy-k1-usb2.c
> +++ b/drivers/phy/spacemit/phy-k1-usb2.c
> @@ -51,6 +51,9 @@
>  #define PHY_K1_HS_HOST_DISC		0x40
>  #define  PHY_K1_HS_HOST_DISC_CLR		BIT(0)
>  
> +#define PHY_K3_HS_HOST_DISC		0x20
> +#define  PHY_K3_HS_HOST_DISC_CLR		BIT(8)
> +
>  #define PHY_PLL_DIV_CFG			0x98
>  #define  PHY_FDIV_FRACT_8_15		GENMASK(7, 0)
>  #define  PHY_FDIV_FRACT_16_19		GENMASK(11, 8)
> @@ -74,10 +77,15 @@
>  
>  #define K1_USB2PHY_RESET_TIME_MS	50
>  
> +struct spacemit_usb2phy_data {
> +	int (*disconnect)(struct phy *phy, int port);
> +};
> +
>  struct spacemit_usb2phy {
>  	struct phy *phy;
>  	struct clk *clk;
>  	struct regmap *regmap_base;
> +	const struct spacemit_usb2phy_data *data;
>  };
>  
>  static const struct regmap_config phy_regmap_config = {
> @@ -145,7 +153,7 @@ static int spacemit_usb2phy_exit(struct phy *phy)
>  	return 0;
>  }
>  
> -static int spacemit_usb2phy_disconnect(struct phy *phy, int port)
> +static int spacemit_k1_usb2phy_disconnect(struct phy *phy, int port)
>  {
>  	struct spacemit_usb2phy *sphy = phy_get_drvdata(phy);
>  
> @@ -155,6 +163,23 @@ static int spacemit_usb2phy_disconnect(struct phy *phy, int port)
>  	return 0;
>  }
>  
> +static int spacemit_k3_usb2phy_disconnect(struct phy *phy, int port)
> +{
> +	struct spacemit_usb2phy *sphy = phy_get_drvdata(phy);
> +
> +	regmap_update_bits(sphy->regmap_base, PHY_K3_HS_HOST_DISC,
> +					   PHY_K3_HS_HOST_DISC_CLR, PHY_K3_HS_HOST_DISC_CLR);
> +
> +	return 0;
> +}
> +
> +static int spacemit_usb2phy_disconnect(struct phy *phy, int port)
> +{
> +	struct spacemit_usb2phy *sphy = phy_get_drvdata(phy);
> +
> +	return sphy->data->disconnect(phy, port);
> +}
> +
>  static const struct phy_ops spacemit_usb2phy_ops = {
>  	.init = spacemit_usb2phy_init,
>  	.exit = spacemit_usb2phy_exit,
> @@ -173,6 +198,8 @@ static int spacemit_usb2phy_probe(struct platform_device *pdev)
>  	if (!sphy)
>  		return -ENOMEM;
>  
> +	sphy->data = device_get_match_data(dev);
> +
>  	sphy->clk = devm_clk_get_prepared(&pdev->dev, NULL);
>  	if (IS_ERR(sphy->clk))
>  		return dev_err_probe(dev, PTR_ERR(sphy->clk), "Failed to get clock\n");
> @@ -195,8 +222,17 @@ static int spacemit_usb2phy_probe(struct platform_device *pdev)
>  	return PTR_ERR_OR_ZERO(phy_provider);
>  }
>  
> +static const struct spacemit_usb2phy_data k1_usb2phy_data = {
> +	.disconnect = spacemit_k1_usb2phy_disconnect,
> +};
> +
> +static const struct spacemit_usb2phy_data k3_usb2phy_data = {
> +	.disconnect = spacemit_k3_usb2phy_disconnect,
> +};
> +
>  static const struct of_device_id spacemit_usb2phy_dt_match[] = {
> -	{ .compatible = "spacemit,k1-usb2-phy", },
> +	{ .compatible = "spacemit,k1-usb2-phy", .data = &k1_usb2phy_data },
> +	{ .compatible = "spacemit,k3-usb2-phy", .data = &k3_usb2phy_data },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, spacemit_usb2phy_dt_match);
> 
> -- 
> 2.52.0
> 
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy