From: Robin Murphy <robin.murphy@arm.com>
To: Geraldo Nascimento <geraldogabriel@gmail.com>,
linux-rockchip@lists.infradead.org
Cc: "Shawn Lin" <shawn.lin@rock-chips.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Heiko Stuebner" <heiko@sntech.de>,
"Vinod Koul" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Rick wertenbroek" <rick.wertenbroek@gmail.com>,
linux-phy@lists.infradead.org, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH v5 4/4] phy: rockchip-pcie: Adjust read mask and write
Date: Fri, 20 Jun 2025 15:19:06 +0100 [thread overview]
Message-ID: <d52fce68-d01e-4b92-825f-f7408df2ca18@arm.com> (raw)
In-Reply-To: <7068a941037eca8ef37cc65e8e08a136c7aac924.1749833987.git.geraldogabriel@gmail.com>
On 2025-06-13 6:04 pm, Geraldo Nascimento wrote:
> Section 17.6.10 of the RK3399 TRM "PCIe PIPE PHY registers Description"
> defines asynchronous strobe TEST_WRITE which should be enabled then
> disabled and seems to have been copy-pasted as of current. Adjust it.
FWIW that's a bit hard to make sense of, given that it bears no relation
whatsoever to the naming used in the code :/
(Not least because the mapping of register fields to phy signals here is
really a property of GRF_SOC_CON8 rather than the phy itself)
> While at it, adjust read mask which should be the same as write mask.
Which write mask? Certainly not PHY_CFG_WR_MASK... However as this
definition is unused since 64cdc0360811 ("phy: rockchip-pcie: remove
unused phy_rd_cfg function"), I don't see much point in touching it
other than to remove it entirely. If it is the case that only the
address field is significant for whatever a "read" operation actually
means, well then that's just another job for ADDR_MASK (which I guess is
what the open-coded business with PHY_CFG_PLL_LOCK is actually doing...)
Thanks,
Robin.
> Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
> ---
> drivers/phy/rockchip/phy-rockchip-pcie.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
> index 48bcc7d2b33b..35d2523ee776 100644
> --- a/drivers/phy/rockchip/phy-rockchip-pcie.c
> +++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
> @@ -30,9 +30,9 @@
> #define PHY_CFG_ADDR_SHIFT 1
> #define PHY_CFG_DATA_MASK 0xf
> #define PHY_CFG_ADDR_MASK 0x3f
> -#define PHY_CFG_RD_MASK 0x3ff
> +#define PHY_CFG_RD_MASK 0x3f
> #define PHY_CFG_WR_ENABLE 1
> -#define PHY_CFG_WR_DISABLE 1
> +#define PHY_CFG_WR_DISABLE 0
> #define PHY_CFG_WR_SHIFT 0
> #define PHY_CFG_WR_MASK 1
> #define PHY_CFG_PLL_LOCK 0x10
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2025-06-20 14:24 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-13 17:03 [RFC PATCH v5 0/4] PCI: rockchip: Improve driver quality Geraldo Nascimento
2025-06-13 17:03 ` [RFC PATCH v5 1/4] PCI: rockchip: Use standard PCIe defines Geraldo Nascimento
2025-06-13 17:03 ` [RFC PATCH v5 2/4] PCI: rockchip: Set Target Link Speed before retraining Geraldo Nascimento
2025-06-13 18:06 ` Geraldo Nascimento
2025-06-20 12:33 ` Robin Murphy
2025-06-20 12:43 ` Geraldo Nascimento
2025-06-13 17:03 ` [RFC PATCH v5 3/4] phy: rockchip-pcie: Enable all four lanes Geraldo Nascimento
2025-06-20 12:04 ` Robin Murphy
2025-06-20 12:26 ` Geraldo Nascimento
2025-06-20 12:47 ` Robin Murphy
2025-06-20 13:00 ` Geraldo Nascimento
2025-06-20 12:50 ` Geraldo Nascimento
2025-06-13 17:04 ` [RFC PATCH v5 4/4] phy: rockchip-pcie: Adjust read mask and write Geraldo Nascimento
2025-06-20 14:19 ` Robin Murphy [this message]
2025-06-20 15:23 ` Geraldo Nascimento
2025-06-20 18:35 ` Geraldo Nascimento
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d52fce68-d01e-4b92-825f-f7408df2ca18@arm.com \
--to=robin.murphy@arm.com \
--cc=bhelgaas@google.com \
--cc=geraldogabriel@gmail.com \
--cc=heiko@sntech.de \
--cc=kishon@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=rick.wertenbroek@gmail.com \
--cc=robh@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).