* [PATCH v8 22/23] scsi: ufs: mediatek: Remove undocumented "clk-scale-up-vcore-min"
From: Nicolas Frattaroli @ 2026-03-04 14:53 UTC (permalink / raw)
To: Alim Akhtar, Avri Altman, Bart Van Assche, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chunfeng Yun, Vinod Koul,
Kishon Vijay Abraham I, Peter Wang, Stanley Jhu,
James E.J. Bottomley, Martin K. Petersen, Philipp Zabel,
Liam Girdwood, Mark Brown, Chaotian Jing, Neil Armstrong
Cc: Louis-Alexis Eyraud, kernel, linux-scsi, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, linux-phy, Nicolas Frattaroli
In-Reply-To: <20260304-mt8196-ufs-v8-0-5b0eac23314f@collabora.com>
The MediaTek UFS driver contains support for an undocumented,
non-vendor-prefixed u32 property named "clk-scale-up-vcore-min".
Since it is not part of any binding, and would not pass a bindings
review in its current form, remove it.
To return this functionality, it needs to be resubmitted in a series
that also introduces it to the binding, and justifies what it is used
for. Compatibility with downstream device trees is not a valid
justification for its existence.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
drivers/ufs/host/ufs-mediatek.c | 19 -------------------
1 file changed, 19 deletions(-)
diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c
index 290c17dbbd75..6292c943ef99 100644
--- a/drivers/ufs/host/ufs-mediatek.c
+++ b/drivers/ufs/host/ufs-mediatek.c
@@ -880,8 +880,6 @@ static void ufs_mtk_init_clocks(struct ufs_hba *hba)
struct ufs_mtk_host *host = ufshcd_get_variant(hba);
struct list_head *head = &hba->clk_list_head;
struct ufs_clk_info *clki, *clki_tmp;
- struct device *dev = hba->dev;
- u32 volt;
/*
* Find private clocks and store them in struct ufs_mtk_clk.
@@ -918,24 +916,7 @@ static void ufs_mtk_init_clocks(struct ufs_hba *hba)
if (!ufs_mtk_is_clk_scale_ready(hba)) {
hba->caps &= ~UFSHCD_CAP_CLK_SCALING;
dev_info(hba->dev, "%s: Clock scaling unavailable", __func__);
- return;
- }
-
- if (!host->reg_vcore)
- return;
-
- if (of_property_read_u32(dev->of_node, "clk-scale-up-vcore-min",
- &volt)) {
- dev_info(dev, "failed to get clk-scale-up-vcore-min");
- return;
}
-
- host->mclk.vcore_volt = volt;
-
- /* If default boot is max gear, request vcore */
- if (volt && host->clk_scale_up)
- if (regulator_set_voltage(host->reg_vcore, volt, INT_MAX))
- dev_err(hba->dev, "Failed to set vcore to %d\n", volt);
}
static void ufs_mtk_setup_clk_gating(struct ufs_hba *hba)
--
2.53.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH v8 23/23] scsi: ufs: mediatek: Add MT8196 compatible, update copyright
From: Nicolas Frattaroli @ 2026-03-04 14:53 UTC (permalink / raw)
To: Alim Akhtar, Avri Altman, Bart Van Assche, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chunfeng Yun, Vinod Koul,
Kishon Vijay Abraham I, Peter Wang, Stanley Jhu,
James E.J. Bottomley, Martin K. Petersen, Philipp Zabel,
Liam Girdwood, Mark Brown, Chaotian Jing, Neil Armstrong
Cc: Louis-Alexis Eyraud, kernel, linux-scsi, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, linux-phy, Nicolas Frattaroli
In-Reply-To: <20260304-mt8196-ufs-v8-0-5b0eac23314f@collabora.com>
THe MT8196's UFS controller has a new compatible. Add the necessary
struct definitions to support it.
Also update the copyrights and authors, without tabs following spaces to
avoid checkpatch errors, to list myself as having contributed to this
driver after the preceding rework patches.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
drivers/ufs/host/ufs-mediatek.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c
index 6292c943ef99..a9e8641e6f29 100644
--- a/drivers/ufs/host/ufs-mediatek.c
+++ b/drivers/ufs/host/ufs-mediatek.c
@@ -1,9 +1,11 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2019 MediaTek Inc.
+ * Copyright (C) 2025 Collabora Ltd.
* Authors:
- * Stanley Chu <stanley.chu@mediatek.com>
- * Peter Wang <peter.wang@mediatek.com>
+ * Stanley Chu <stanley.chu@mediatek.com>
+ * Peter Wang <peter.wang@mediatek.com>
+ * Nicolas Frattaroli <nicolas.frattaroli@collabora.com> (Major cleanups)
*/
#include <linux/arm-smccc.h>
@@ -2200,6 +2202,10 @@ static const char *const ufs_mtk_regs_avdd12_ckbuf_avdd18[] = {
"avdd12", "avdd12-ckbuf", "avdd18"
};
+static const char *const ufs_mtk_regs_avdd12_ckbuf[] = {
+ "avdd12", "avdd12-ckbuf"
+};
+
static const struct ufs_mtk_soc_data mt8183_data = {
.has_avdd09 = true,
.reg_names = ufs_mtk_regs_avdd12_avdd18,
@@ -2212,10 +2218,17 @@ static const struct ufs_mtk_soc_data mt8192_8195_data = {
.num_reg_names = ARRAY_SIZE(ufs_mtk_regs_avdd12_ckbuf_avdd18),
};
+static const struct ufs_mtk_soc_data mt8196_data = {
+ .has_avdd09 = true,
+ .reg_names = ufs_mtk_regs_avdd12_ckbuf,
+ .num_reg_names = ARRAY_SIZE(ufs_mtk_regs_avdd12_ckbuf),
+};
+
static const struct of_device_id ufs_mtk_of_match[] = {
{ .compatible = "mediatek,mt8183-ufshci", .data = &mt8183_data },
{ .compatible = "mediatek,mt8192-ufshci", .data = &mt8192_8195_data },
{ .compatible = "mediatek,mt8195-ufshci", .data = &mt8192_8195_data },
+ { .compatible = "mediatek,mt8196-ufshci", .data = &mt8196_data },
{},
};
MODULE_DEVICE_TABLE(of, ufs_mtk_of_match);
--
2.53.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 01/22] ata: add <linux/pm_runtime.h> where missing
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Damien Le Moal, Niklas Cassel
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
It appears that libahci.c, ahci.c as well as the ahci_brcm, ahci_ceva
and ahci_qoriq drivers are using runtime PM operations without including
<linux/pm_runtime.h>. This header is somehow being indirectly provided
by <linux/phy/phy.h>, which would like to drop it (none of the functions
it exports need it).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Niklas Cassel <cassel@kernel.org>
---
drivers/ata/ahci.c | 1 +
drivers/ata/ahci_brcm.c | 1 +
drivers/ata/ahci_ceva.c | 1 +
drivers/ata/ahci_qoriq.c | 1 +
drivers/ata/libahci.c | 1 +
5 files changed, 5 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 931d0081169b..aa3c4949c4ab 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -26,6 +26,7 @@
#include <linux/device.h>
#include <linux/dmi.h>
#include <linux/gfp.h>
+#include <linux/pm_runtime.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 29be74fedcf0..48460e515722 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/string.h>
diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
index 2d6a08c23d6a..3938bf378341 100644
--- a/drivers/ata/ahci_ceva.c
+++ b/drivers/ata/ahci_ceva.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include "ahci.h"
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index 0dec1a17e5b1..409152bfefb6 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -14,6 +14,7 @@
#include <linux/device.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/libata.h>
#include "ahci.h"
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index c79abdfcd7a9..e0de4703a4f2 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -30,6 +30,7 @@
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <linux/pci.h>
+#include <linux/pm_runtime.h>
#include "ahci.h"
#include "libata.h"
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 00/22] Split Generic PHY consumer and provider API
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Abhinav Kumar, Alexandre Belloni, André Draszik, Andrew Lunn,
Andrzej Hajda, Andy Yan, Bjorn Helgaas, Chen-Yu Tsai,
Claudiu Beznea, Damien Le Moal, Daniel Machon, David Airlie,
David S. Miller, Dmitry Baryshkov, Eric Dumazet, Fabio Estevam,
Frank Li, Geert Uytterhoeven, Greg Kroah-Hartman,
Heiko Stübner, Inki Dae, Jagan Teki, Jakub Kicinski,
Jernej Skrabec, Jessica Zhang, Jonas Karlman, Jonathan Hunter,
Kevin Xie, Krzysztof Kozlowski, Krzysztof Wilczyński,
Laurent Pinchart, Linus Walleij, Lorenzo Pieralisi,
Maarten Lankhorst, Magnus Damm, Manivannan Sadhasivam,
Marc Kleine-Budde, Marek Szyprowski, Marijn Suijten,
Markus Schneider-Pargmann, Mauro Carvalho Chehab, Maxime Ripard,
Michael Dege, Nicolas Ferre, Niklas Cassel, Paolo Abeni,
Pengutronix Kernel Team, Peter Chen, Peter Griffin, Rob Clark,
Robert Foss, Rob Herring, Russell King (Oracle), Samuel Holland,
Sandy Huang, Sascha Hauer, Sean Paul, Sebastian Reichel,
Shawn Guo, Shawn Lin, Simona Vetter, Steen Hegelund,
Thierry Reding, Thinh Nguyen, Thomas Zimmermann, Tudor Ambarus,
Vincent Mailhol, Yixun Lan, Yoshihiro Shimoda
The biggest problem requiring this split is the fact that consumer
drivers poke around in struct phy, accessing fields which shouldn't be
visible to them. Follow the example of mux, gpio, iio, spi offload,
pwrsec, pinctrl and regulator, which each expose separate headers for
consumers and providers.
Some off-list discussions were had with Vinod Koul regarding the 3 PHY
providers outside the drivers/phy/ subsystem. It was agreed that it is
desirable to relocate them to drivers/phy/, rather than to publish
phy-provider.h to include/linux/phy/ for liberal use. Only phy.h and
(new) phy-props.h - consumer-facing headers - stay there.
The hope is that developers get a hint when they need to include the
wrong header to get their job done.
If that fails, patch 22/22 adds a regex in the MAINTAINERS entry that
ensures linux-phy is copied on all Generic PHY patches, for an extra set
of eyes.
Requested merge strategy, I hope this works for everyone:
- Subsystem maintainers ACK their affected portions
- Entire series goes through linux-phy
- linux-phy provides stable tag
- Said tag is merged back into affected subsystem 'next' branches
Cc: Abhinav Kumar <abhinav.kumar@linux.dev>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chen-Yu Tsai <wens@kernel.org>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Daniel Machon <daniel.machon@microchip.com>
Cc: David Airlie <airlied@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Jessica Zhang <jesszhan0024@gmail.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Kevin Xie <kevin.xie@starfivetech.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Dege <michael.dege@renesas.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sean Paul <sean@poorly.run>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Yixun Lan <dlan@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Vladimir Oltean (22):
ata: add <linux/pm_runtime.h> where missing
PCI: add missing headers transitively included by <linux/phy/phy.h>
usb: add missing headers transitively included by <linux/phy/phy.h>
drm: add <linux/pm_runtime.h> where missing
phy: add <linux/pm_runtime.h> where missing
phy: spacemit: include missing <linux/phy/phy.h>
net: lan969x: include missing <linux/of.h>
PCI: remove device links to PHY
ufs: exynos: stop poking into struct phy guts
drm/rockchip: dw_hdmi: avoid direct dereference of phy->dev.of_node
drm/msm/dp: remove debugging prints with internal struct phy state
phy: move provider API out of public <linux/phy/phy.h>
phy: introduce phy_get_max_link_rate() helper for consumers
drm/rockchip: dsi: include PHY provider header
drm: bridge: cdns-mhdp8546: use consumer API for getting PHY bus width
media: sunxi: a83-mips-csi2: include PHY provider header
net: renesas: rswitch: include PHY provider header
pinctrl: tegra-xusb: include PHY provider header
power: supply: cpcap-charger: include missing <linux/property.h>
phy: include PHY provider header
phy: remove temporary provider compatibility from consumer header
MAINTAINERS: add regex for linux-phy
MAINTAINERS | 1 +
drivers/ata/ahci.c | 1 +
drivers/ata/ahci_brcm.c | 1 +
drivers/ata/ahci_ceva.c | 1 +
drivers/ata/ahci_qoriq.c | 1 +
drivers/ata/libahci.c | 1 +
.../drm/bridge/analogix/analogix_dp_core.c | 1 +
.../drm/bridge/cadence/cdns-mhdp8546-core.c | 7 +-
drivers/gpu/drm/bridge/nwl-dsi.c | 1 +
drivers/gpu/drm/bridge/samsung-dsim.c | 1 +
drivers/gpu/drm/bridge/synopsys/dw-dp.c | 2 +-
drivers/gpu/drm/msm/dp/dp_aux.c | 1 +
drivers/gpu/drm/msm/dp/dp_ctrl.c | 18 -
drivers/gpu/drm/rockchip/cdn-dp-core.c | 1 +
.../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 1 +
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 25 +-
.../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c | 2 +-
drivers/net/can/at91_can.c | 2 +-
drivers/net/can/flexcan/flexcan-core.c | 2 +-
drivers/net/can/m_can/m_can_platform.c | 2 +-
drivers/net/can/rcar/rcar_canfd.c | 2 +-
.../microchip/sparx5/lan969x/lan969x_rgmii.c | 1 +
drivers/net/ethernet/renesas/rswitch_main.c | 1 +
drivers/pci/controller/cadence/pcie-cadence.c | 16 +-
drivers/pci/controller/dwc/pci-dra7xx.c | 16 -
drivers/pci/controller/dwc/pci-keystone.c | 32 +-
drivers/pci/controller/dwc/pcie-dw-rockchip.c | 1 +
drivers/pci/controller/dwc/pcie-histb.c | 1 +
drivers/pci/controller/dwc/pcie-qcom-ep.c | 1 +
drivers/pci/controller/dwc/pcie-spacemit-k1.c | 2 +
drivers/pci/controller/dwc/pcie-tegra194.c | 1 +
drivers/pci/controller/pci-tegra.c | 1 +
drivers/pci/controller/pcie-rockchip-host.c | 1 +
drivers/pci/controller/plda/pcie-starfive.c | 1 +
drivers/phy/allwinner/phy-sun4i-usb.c | 3 +-
drivers/phy/allwinner/phy-sun50i-usb3.c | 3 +-
drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 4 +-
drivers/phy/allwinner/phy-sun9i-usb.c | 3 +-
drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c | 2 +
.../amlogic/phy-meson-axg-mipi-pcie-analog.c | 3 +-
drivers/phy/amlogic/phy-meson-axg-pcie.c | 2 +
.../amlogic/phy-meson-g12a-mipi-dphy-analog.c | 3 +-
drivers/phy/amlogic/phy-meson-g12a-usb2.c | 2 +
.../phy/amlogic/phy-meson-g12a-usb3-pcie.c | 3 +-
drivers/phy/amlogic/phy-meson-gxl-usb2.c | 3 +-
drivers/phy/amlogic/phy-meson8-hdmi-tx.c | 3 +-
drivers/phy/amlogic/phy-meson8b-usb2.c | 3 +-
drivers/phy/apple/atc.c | 3 +-
drivers/phy/broadcom/phy-bcm-cygnus-pcie.c | 3 +-
drivers/phy/broadcom/phy-bcm-kona-usb2.c | 4 +-
drivers/phy/broadcom/phy-bcm-ns-usb2.c | 3 +-
drivers/phy/broadcom/phy-bcm-ns-usb3.c | 3 +-
drivers/phy/broadcom/phy-bcm-ns2-pcie.c | 3 +-
drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c | 3 +-
drivers/phy/broadcom/phy-bcm-sr-pcie.c | 3 +-
drivers/phy/broadcom/phy-bcm-sr-usb.c | 3 +-
drivers/phy/broadcom/phy-bcm63xx-usbh.c | 3 +-
drivers/phy/broadcom/phy-brcm-sata.c | 3 +-
drivers/phy/broadcom/phy-brcm-usb.c | 2 +-
drivers/phy/cadence/cdns-dphy-rx.c | 3 +-
drivers/phy/cadence/cdns-dphy.c | 4 +-
drivers/phy/cadence/phy-cadence-salvo.c | 3 +-
drivers/phy/cadence/phy-cadence-sierra.c | 3 +-
drivers/phy/cadence/phy-cadence-torrent.c | 3 +-
drivers/phy/canaan/phy-k230-usb.c | 3 +-
drivers/phy/eswin/phy-eic7700-sata.c | 3 +-
.../phy/freescale/phy-fsl-imx8-mipi-dphy.c | 3 +-
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 4 +-
drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 3 +-
drivers/phy/freescale/phy-fsl-imx8qm-hsio.c | 6 +-
.../phy/freescale/phy-fsl-imx8qm-lvds-phy.c | 3 +-
drivers/phy/freescale/phy-fsl-lynx-28g.c | 3 +-
drivers/phy/hisilicon/phy-hi3660-usb3.c | 3 +-
drivers/phy/hisilicon/phy-hi3670-pcie.c | 3 +-
drivers/phy/hisilicon/phy-hi3670-usb3.c | 3 +-
drivers/phy/hisilicon/phy-hi6220-usb.c | 3 +-
drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 4 +-
drivers/phy/hisilicon/phy-histb-combphy.c | 3 +-
drivers/phy/hisilicon/phy-hix5hd2-sata.c | 3 +-
drivers/phy/ingenic/phy-ingenic-usb.c | 3 +-
drivers/phy/intel/phy-intel-keembay-emmc.c | 3 +-
drivers/phy/intel/phy-intel-keembay-usb.c | 3 +-
drivers/phy/intel/phy-intel-lgm-combo.c | 4 +-
drivers/phy/intel/phy-intel-lgm-emmc.c | 3 +-
drivers/phy/lantiq/phy-lantiq-rcu-usb2.c | 3 +-
drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c | 4 +-
drivers/phy/marvell/phy-armada375-usb2.c | 3 +-
drivers/phy/marvell/phy-armada38x-comphy.c | 3 +-
drivers/phy/marvell/phy-berlin-sata.c | 3 +-
drivers/phy/marvell/phy-berlin-usb.c | 3 +-
drivers/phy/marvell/phy-mmp3-hsic.c | 3 +-
drivers/phy/marvell/phy-mmp3-usb.c | 3 +-
drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 3 +-
drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 3 +-
drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 3 +-
drivers/phy/marvell/phy-mvebu-cp110-utmi.c | 3 +-
drivers/phy/marvell/phy-mvebu-sata.c | 3 +-
drivers/phy/marvell/phy-pxa-28nm-hsic.c | 3 +-
drivers/phy/marvell/phy-pxa-28nm-usb2.c | 3 +-
drivers/phy/marvell/phy-pxa-usb.c | 3 +-
drivers/phy/mediatek/phy-mtk-dp.c | 3 +-
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 1 -
drivers/phy/mediatek/phy-mtk-hdmi.h | 3 +-
drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c | 2 +-
drivers/phy/mediatek/phy-mtk-mipi-dsi.h | 3 +-
drivers/phy/mediatek/phy-mtk-pcie.c | 2 +-
drivers/phy/mediatek/phy-mtk-tphy.c | 2 +-
drivers/phy/mediatek/phy-mtk-ufs.c | 2 +-
drivers/phy/mediatek/phy-mtk-xfi-tphy.c | 2 +-
drivers/phy/mediatek/phy-mtk-xsphy.c | 2 +-
drivers/phy/microchip/lan966x_serdes.c | 4 +-
drivers/phy/microchip/sparx5_serdes.c | 2 +-
drivers/phy/motorola/phy-cpcap-usb.c | 3 +-
drivers/phy/motorola/phy-mapphone-mdm6600.c | 5 +-
drivers/phy/mscc/phy-ocelot-serdes.c | 3 +-
drivers/phy/nuvoton/phy-ma35d1-usb2.c | 3 +-
drivers/phy/phy-airoha-pcie.c | 2 +-
drivers/phy/phy-can-transceiver.c | 3 +-
drivers/phy/phy-core-mipi-dphy.c | 4 +-
drivers/phy/phy-core.c | 42 ++
drivers/phy/phy-google-usb.c | 4 +-
drivers/phy/phy-lpc18xx-usb-otg.c | 3 +-
drivers/phy/phy-nxp-ptn3222.c | 3 +-
drivers/phy/phy-pistachio-usb.c | 4 +-
drivers/phy/phy-provider.h | 256 +++++++++
drivers/phy/phy-snps-eusb2.c | 2 +
drivers/phy/phy-xgene.c | 3 +-
drivers/phy/qualcomm/phy-ath79-usb.c | 3 +-
drivers/phy/qualcomm/phy-qcom-apq8064-sata.c | 3 +-
drivers/phy/qualcomm/phy-qcom-edp.c | 3 +-
.../phy/qualcomm/phy-qcom-eusb2-repeater.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 3 +-
drivers/phy/qualcomm/phy-qcom-m31-eusb2.c | 2 +
drivers/phy/qualcomm/phy-qcom-m31.c | 3 +-
drivers/phy/qualcomm/phy-qcom-pcie2.c | 3 +-
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 +-
.../phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 3 +-
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 3 +-
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 3 +-
.../phy/qualcomm/phy-qcom-qmp-usb-legacy.c | 4 +-
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 4 +-
drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 4 +-
drivers/phy/qualcomm/phy-qcom-qusb2.c | 5 +-
drivers/phy/qualcomm/phy-qcom-sgmii-eth.c | 3 +-
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 4 +-
.../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 3 +-
drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c | 3 +-
drivers/phy/qualcomm/phy-qcom-usb-hs.c | 3 +-
drivers/phy/qualcomm/phy-qcom-usb-hsic.c | 3 +-
drivers/phy/qualcomm/phy-qcom-usb-ss.c | 3 +-
drivers/phy/ralink/phy-mt7621-pci.c | 3 +-
drivers/phy/ralink/phy-ralink-usb.c | 3 +-
drivers/phy/realtek/phy-rtk-usb2.c | 3 +-
drivers/phy/realtek/phy-rtk-usb3.c | 3 +-
drivers/phy/renesas/phy-rcar-gen2.c | 3 +-
drivers/phy/renesas/phy-rcar-gen3-pcie.c | 4 +-
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 3 +-
drivers/phy/renesas/phy-rcar-gen3-usb3.c | 3 +-
drivers/phy/renesas/phy-rzg3e-usb3.c | 3 +-
drivers/phy/renesas/r8a779f0-ether-serdes.c | 4 +-
drivers/phy/rockchip/phy-rockchip-dp.c | 3 +-
drivers/phy/rockchip/phy-rockchip-dphy-rx0.c | 3 +-
drivers/phy/rockchip/phy-rockchip-emmc.c | 3 +-
.../phy/rockchip/phy-rockchip-inno-csidphy.c | 3 +-
.../phy/rockchip/phy-rockchip-inno-dsidphy.c | 4 +-
drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 2 +
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 3 +-
.../rockchip/phy-rockchip-naneng-combphy.c | 3 +-
drivers/phy/rockchip/phy-rockchip-pcie.c | 2 +-
.../phy/rockchip/phy-rockchip-samsung-dcphy.c | 3 +-
.../phy/rockchip/phy-rockchip-samsung-hdptx.c | 2 +
.../phy/rockchip/phy-rockchip-snps-pcie3.c | 3 +-
drivers/phy/rockchip/phy-rockchip-typec.c | 5 +-
drivers/phy/rockchip/phy-rockchip-usb.c | 3 +-
drivers/phy/rockchip/phy-rockchip-usbdp.c | 2 +
drivers/phy/samsung/phy-exynos-dp-video.c | 3 +-
drivers/phy/samsung/phy-exynos-mipi-video.c | 3 +-
drivers/phy/samsung/phy-exynos-pcie.c | 3 +-
drivers/phy/samsung/phy-exynos4210-usb2.c | 3 +-
drivers/phy/samsung/phy-exynos4x12-usb2.c | 3 +-
drivers/phy/samsung/phy-exynos5-usbdrd.c | 2 +
drivers/phy/samsung/phy-exynos5250-sata.c | 3 +-
drivers/phy/samsung/phy-exynos5250-usb2.c | 3 +-
drivers/phy/samsung/phy-s5pv210-usb2.c | 3 +-
drivers/phy/samsung/phy-samsung-ufs.c | 2 +-
drivers/phy/samsung/phy-samsung-ufs.h | 3 +-
drivers/phy/samsung/phy-samsung-usb2.c | 2 +
drivers/phy/samsung/phy-samsung-usb2.h | 3 +-
drivers/phy/socionext/phy-uniphier-ahci.c | 3 +-
drivers/phy/socionext/phy-uniphier-pcie.c | 3 +-
drivers/phy/socionext/phy-uniphier-usb2.c | 3 +-
drivers/phy/socionext/phy-uniphier-usb3hs.c | 3 +-
drivers/phy/socionext/phy-uniphier-usb3ss.c | 3 +-
drivers/phy/sophgo/phy-cv1800-usb2.c | 3 +-
drivers/phy/spacemit/phy-k1-pcie.c | 4 +-
drivers/phy/spacemit/phy-k1-usb2.c | 2 +
drivers/phy/st/phy-miphy28lp.c | 4 +-
drivers/phy/st/phy-spear1310-miphy.c | 3 +-
drivers/phy/st/phy-spear1340-miphy.c | 3 +-
drivers/phy/st/phy-stih407-usb.c | 3 +-
drivers/phy/st/phy-stm32-combophy.c | 3 +-
drivers/phy/st/phy-stm32-usbphyc.c | 2 +
drivers/phy/starfive/phy-jh7110-dphy-rx.c | 3 +-
drivers/phy/starfive/phy-jh7110-dphy-tx.c | 3 +-
drivers/phy/starfive/phy-jh7110-pcie.c | 3 +-
drivers/phy/starfive/phy-jh7110-usb.c | 3 +-
drivers/phy/sunplus/phy-sunplus-usb2.c | 3 +-
drivers/phy/tegra/phy-tegra194-p2u.c | 3 +-
drivers/phy/tegra/xusb-tegra124.c | 2 +-
drivers/phy/tegra/xusb-tegra186.c | 2 +-
drivers/phy/tegra/xusb-tegra210.c | 2 +-
drivers/phy/tegra/xusb.c | 2 +-
drivers/phy/ti/phy-am654-serdes.c | 3 +-
drivers/phy/ti/phy-da8xx-usb.c | 3 +-
drivers/phy/ti/phy-dm816x-usb.c | 3 +-
drivers/phy/ti/phy-gmii-sel.c | 3 +-
drivers/phy/ti/phy-omap-usb2.c | 3 +-
drivers/phy/ti/phy-ti-pipe3.c | 3 +-
drivers/phy/ti/phy-tusb1210.c | 1 +
drivers/phy/ti/phy-twl4030-usb.c | 3 +-
drivers/phy/xilinx/phy-zynqmp.c | 4 +-
drivers/pinctrl/tegra/pinctrl-tegra-xusb.c | 2 +-
drivers/power/supply/cpcap-charger.c | 1 +
drivers/ufs/host/ufs-exynos.c | 17 +-
drivers/ufs/host/ufs-exynos.h | 1 +
drivers/usb/chipidea/ci_hdrc_imx.c | 1 +
drivers/usb/core/hcd.c | 1 +
drivers/usb/dwc3/dwc3-generic-plat.c | 1 +
drivers/usb/dwc3/gadget.c | 1 +
include/linux/phy/phy-props.h | 75 +++
include/linux/phy/phy-sun4i-usb.h | 2 +-
include/linux/phy/phy.h | 497 ++++--------------
include/linux/phy/ulpi_phy.h | 2 +-
235 files changed, 915 insertions(+), 694 deletions(-)
create mode 100644 drivers/phy/phy-provider.h
create mode 100644 include/linux/phy/phy-props.h
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply
* [PATCH phy-next 02/22] PCI: add missing headers transitively included by <linux/phy/phy.h>
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Lorenzo Pieralisi, Krzysztof Wilczyński,
Manivannan Sadhasivam, Rob Herring, Bjorn Helgaas, Heiko Stuebner,
Shawn Guo, Yixun Lan, Thierry Reding, Jonathan Hunter, Shawn Lin,
Kevin Xie
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
The tegra as well as a few dwc PCI controller drivers uses PM runtime
operations without including the required <linux/pm_runtime.h> header.
Similarly, pcie-rockchip-host, pcie-starfive as well as a few dwc PCI
controllers use the regulator consumer API without including
<linux/regulator/consumer.h>.
It seems these function prototypes were indirectly provided by
<linux/phy/phy.h>, mostly by mistake (none of the functions it exports
need it).
Before the PHY header can drop the unnecessary includes, make sure the
PCI controller drivers include what they use.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Yixun Lan <dlan@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Kevin Xie <kevin.xie@starfivetech.com>
---
drivers/pci/controller/dwc/pci-keystone.c | 1 +
drivers/pci/controller/dwc/pcie-dw-rockchip.c | 1 +
drivers/pci/controller/dwc/pcie-histb.c | 1 +
drivers/pci/controller/dwc/pcie-qcom-ep.c | 1 +
drivers/pci/controller/dwc/pcie-spacemit-k1.c | 2 ++
drivers/pci/controller/dwc/pcie-tegra194.c | 1 +
drivers/pci/controller/pci-tegra.c | 1 +
drivers/pci/controller/pcie-rockchip-host.c | 1 +
drivers/pci/controller/plda/pcie-starfive.c | 1 +
9 files changed, 10 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 20fa4dadb82a..642e4c45eefc 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -24,6 +24,7 @@
#include <linux/of_pci.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/resource.h>
#include <linux/signal.h>
diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
index 5b17da63151d..e0079ec108ab 100644
--- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
+++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
@@ -21,6 +21,7 @@
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include "../../pci.h"
diff --git a/drivers/pci/controller/dwc/pcie-histb.c b/drivers/pci/controller/dwc/pcie-histb.c
index a52071589377..432a54c5bfce 100644
--- a/drivers/pci/controller/dwc/pcie-histb.c
+++ b/drivers/pci/controller/dwc/pcie-histb.c
@@ -18,6 +18,7 @@
#include <linux/pci.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <linux/resource.h>
#include <linux/reset.h>
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 18460f01b2c6..e417122da51d 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -19,6 +19,7 @@
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/module.h>
diff --git a/drivers/pci/controller/dwc/pcie-spacemit-k1.c b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
index be20a520255b..dbec159fd458 100644
--- a/drivers/pci/controller/dwc/pcie-spacemit-k1.c
+++ b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
@@ -15,7 +15,9 @@
#include <linux/mod_devicetable.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/types.h>
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 06571d806ab3..3378a89580ab 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -27,6 +27,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/random.h>
+#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/resource.h>
#include <linux/types.h>
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 512309763d1f..a2c1662b6e81 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -36,6 +36,7 @@
#include <linux/phy/phy.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/sizes.h>
#include <linux/slab.h>
diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
index ee1822ca01db..46adb4582fcc 100644
--- a/drivers/pci/controller/pcie-rockchip-host.c
+++ b/drivers/pci/controller/pcie-rockchip-host.c
@@ -24,6 +24,7 @@
#include <linux/of_pci.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include "../pci.h"
#include "pcie-rockchip.h"
diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
index 298036c3e7f9..22344cca167b 100644
--- a/drivers/pci/controller/plda/pcie-starfive.c
+++ b/drivers/pci/controller/plda/pcie-starfive.c
@@ -21,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include "../../pci.h"
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 03/22] usb: add missing headers transitively included by <linux/phy/phy.h>
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Peter Chen, Greg Kroah-Hartman, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Thinh Nguyen
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
The chipidea ci_hdrc_imx driver uses regulator consumer API like
regulator_enable() but does not include <linux/regulator/consumer.h>.
The core USB HCD driver calls invalidate_kernel_vmap_range() and
flush_kernel_vmap_range(), but does not include <linux/highmem.h>.
The DWC3 gadget driver calls:
- device_property_present()
- device_property_count_u8()
- device_property_read_u8_array()
but does not include <linux/property.h>
The dwc3-generic-plat driver uses of_device_get_match_data() but does
not include <linux/of.h>.
In all these cases, the necessary includes were still provided somehow,
directly or indirectly, through <linux/phy/phy.h>. The latter header
wants to drop those includes, so fill in the required headers to avoid
any breakage.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 1 +
drivers/usb/core/hcd.c | 1 +
drivers/usb/dwc3/dwc3-generic-plat.c | 1 +
drivers/usb/dwc3/gadget.c | 1 +
4 files changed, 4 insertions(+)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 56d2ba824a0b..0a21d7cc5f5a 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm_qos.h>
+#include <linux/regulator/consumer.h>
#include "ci.h"
#include "ci_hdrc_imx.h"
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index dee842ea6931..7a3261f72463 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -10,6 +10,7 @@
*/
#include <linux/bcd.h>
+#include <linux/highmem.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/kernel.h>
diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
index e846844e0023..2ee1bb9d7199 100644
--- a/drivers/usb/dwc3/dwc3-generic-plat.c
+++ b/drivers/usb/dwc3/dwc3-generic-plat.c
@@ -8,6 +8,7 @@
*/
#include <linux/clk.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/regmap.h>
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0a688904ce8c..d06171af6870 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 04/22] drm: add <linux/pm_runtime.h> where missing
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Andrzej Hajda, Robert Foss, Laurent Pinchart, Jonas Karlman,
Jernej Skrabec, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Simona Vetter, Inki Dae,
Jagan Teki, Marek Szyprowski, Rob Clark, Dmitry Baryshkov
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
Multiple DRM bridge drivers use runtime PM operations without
including the proper header, instead relying on transitive inclusion
by <linux/phy/phy.h>.
The PHY subsystem wants to get rid of headers it provides for no reason,
so modify these drivers to include what they need directly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 1 +
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 1 +
drivers/gpu/drm/bridge/nwl-dsi.c | 1 +
drivers/gpu/drm/bridge/samsung-dsim.c | 1 +
drivers/gpu/drm/msm/dp/dp_aux.c | 1 +
drivers/gpu/drm/rockchip/cdn-dp-core.c | 1 +
6 files changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index efe534977d12..9dfe790e6c14 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -18,6 +18,7 @@
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <drm/bridge/analogix_dp.h>
#include <drm/drm_atomic.h>
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index 9392c226ff5b..a8b6ae58cb0a 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -32,6 +32,7 @@
#include <linux/phy/phy.h>
#include <linux/phy/phy-dp.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/wait.h>
diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
index 2f7429b24fc2..9ac8796ae91e 100644
--- a/drivers/gpu/drm/bridge/nwl-dsi.c
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -18,6 +18,7 @@
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/sys_soc.h>
diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 930aaa659c97..54bc148fc29d 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -20,6 +20,7 @@
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/units.h>
#include <video/mipi_display.h>
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
index 3825a2fb48e2..5ee22f88bd28 100644
--- a/drivers/gpu/drm/msm/dp/dp_aux.c
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -6,6 +6,7 @@
#include <linux/delay.h>
#include <linux/iopoll.h>
#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
#include <drm/drm_print.h>
#include "dp_reg.h"
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 177e30445ee8..68556daa54ae 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -10,6 +10,7 @@
#include <linux/firmware.h>
#include <linux/mfd/syscon.h>
#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 05/22] phy: add <linux/pm_runtime.h> where missing
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Peter Griffin, André Draszik, Tudor Ambarus,
Geert Uytterhoeven, Magnus Damm, Heiko Stuebner
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
It appears that the phy-mapphone-mdm6600, phy-qcom-snps-femto-v2,
phy-rcar-gen3-pcie, r8a779f0-ether-serdes and phy-rockchip-typec drivers
call runtime PM operations without including the proper header.
This was provided by <linux/phy/phy.h> but no function exported by this
header directly needs it. So we need to drop it from there, and fix up
drivers that used to depend on that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
---
drivers/phy/motorola/phy-mapphone-mdm6600.c | 1 +
drivers/phy/phy-google-usb.c | 1 +
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 1 +
drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c | 1 +
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 1 +
drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 1 +
drivers/phy/qualcomm/phy-qcom-qusb2.c | 1 +
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 1 +
drivers/phy/renesas/phy-rcar-gen3-pcie.c | 1 +
drivers/phy/renesas/r8a779f0-ether-serdes.c | 1 +
drivers/phy/rockchip/phy-rockchip-typec.c | 1 +
drivers/phy/ti/phy-tusb1210.c | 1 +
12 files changed, 12 insertions(+)
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index fd0e0cd1c1cf..ce1dad8c438d 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -17,6 +17,7 @@
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
#define PHY_MDM6600_PHY_DELAY_MS 4000 /* PHY enable 2.2s to 3.5s */
#define PHY_MDM6600_ENABLED_DELAY_MS 8000 /* 8s more total for MDM6600 */
diff --git a/drivers/phy/phy-google-usb.c b/drivers/phy/phy-google-usb.c
index ab20bc20f19e..48cfa2e28347 100644
--- a/drivers/phy/phy-google-usb.c
+++ b/drivers/phy/phy-google-usb.c
@@ -16,6 +16,7 @@
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/usb/typec_mux.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 93f1aa10d400..b9ea7d058e93 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -16,6 +16,7 @@
#include <linux/of_graph.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
index 8bf951b0490c..2bd5862c5ba8 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
@@ -16,6 +16,7 @@
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index b0ecd5ba2464..d88b8a415e85 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -15,6 +15,7 @@
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index c342479a3798..f62e1f6ecc07 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -16,6 +16,7 @@
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index eb93015be841..191040f6d60f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -14,6 +14,7 @@
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index eb0b0f61d98e..8915fa250e81 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -12,6 +12,7 @@
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
diff --git a/drivers/phy/renesas/phy-rcar-gen3-pcie.c b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
index c0e5a4ac82de..3e2cf59ad480 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-pcie.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
@@ -11,6 +11,7 @@
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/spinlock.h>
#define PHY_CTRL 0x4000 /* R8A77980 only */
diff --git a/drivers/phy/renesas/r8a779f0-ether-serdes.c b/drivers/phy/renesas/r8a779f0-ether-serdes.c
index 8a6b6f366fe3..c34427ac4fdb 100644
--- a/drivers/phy/renesas/r8a779f0-ether-serdes.c
+++ b/drivers/phy/renesas/r8a779f0-ether-serdes.c
@@ -12,6 +12,7 @@
#include <linux/phy.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/reset.h>
#define R8A779F0_ETH_SERDES_NUM 3
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index d9701b6106d5..0a318ccf1bbf 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -49,6 +49,7 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
diff --git a/drivers/phy/ti/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
index c3ae9d7948d7..b7080403e649 100644
--- a/drivers/phy/ti/phy-tusb1210.c
+++ b/drivers/phy/ti/phy-tusb1210.c
@@ -13,6 +13,7 @@
#include <linux/ulpi/regs.h>
#include <linux/gpio/consumer.h>
#include <linux/phy/ulpi_phy.h>
+#include <linux/pm_runtime.h>
#include <linux/power_supply.h>
#include <linux/property.h>
#include <linux/workqueue.h>
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 06/22] phy: spacemit: include missing <linux/phy/phy.h>
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Yixun Lan
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
This driver relies on a transitive inclusion of the PHY API header
through the USB headers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Yixun Lan <dlan@kernel.org>
---
drivers/phy/spacemit/phy-k1-usb2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c
index 342061380012..14a02f554810 100644
--- a/drivers/phy/spacemit/phy-k1-usb2.c
+++ b/drivers/phy/spacemit/phy-k1-usb2.c
@@ -9,6 +9,7 @@
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/iopoll.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/usb/of.h>
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 07/22] net: lan969x: include missing <linux/of.h>
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Daniel Machon, Andrew Lunn, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Steen Hegelund
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
This file is calling of_property_read_u32() without including the proper
header for it. It is provided by <linux/phy/phy.h>, which wants to get
rid of it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Daniel Machon <daniel.machon@microchip.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
---
drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c b/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c
index 4e422ca50828..249114b40c42 100644
--- a/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c
+++ b/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c
@@ -4,6 +4,7 @@
* Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries.
*/
+#include <linux/of.h>
#include "lan969x.h"
/* Tx clock selectors */
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 08/22] PCI: remove device links to PHY
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Lorenzo Pieralisi, Krzysztof Wilczyński,
Manivannan Sadhasivam, Rob Herring, Bjorn Helgaas,
Vignesh Raghavendra, Siddharth Vadapalli
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
This is practically a full revert of commit
7a4db656a635 ("PCI: dra7xx: Create functional dependency between PCIe and PHY")
and a partial revert of the device link pieces from commits
dfb80534692d ("PCI: cadence: Add generic PHY support to host and EP drivers")
49229238ab47 ("PCI: keystone: Cleanup PHY handling")
The trouble with these commits is that they dereference fields inside
struct phy from a consumer driver, which will become no longer possible.
Since commit 987351e1ea77 ("phy: core: Add consumer device link
support") from 2019, the PHY core also adds a device link to order PHY
provider and consumer suspend/resume operations. All reverted commits
are from 2017-2018, and what they do should actually be redundant now.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Siddharth Vadapalli <s-vadapalli@ti.com>
---
drivers/pci/controller/cadence/pcie-cadence.c | 16 +---------
drivers/pci/controller/dwc/pci-dra7xx.c | 16 ----------
drivers/pci/controller/dwc/pci-keystone.c | 31 +++----------------
3 files changed, 5 insertions(+), 58 deletions(-)
diff --git a/drivers/pci/controller/cadence/pcie-cadence.c b/drivers/pci/controller/cadence/pcie-cadence.c
index a1eada56edba..0ac980249941 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.c
+++ b/drivers/pci/controller/cadence/pcie-cadence.c
@@ -222,7 +222,6 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
struct device_node *np = dev->of_node;
int phy_count;
struct phy **phy;
- struct device_link **link;
int i;
int ret;
const char *name;
@@ -238,10 +237,6 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
if (!phy)
return -ENOMEM;
- link = devm_kcalloc(dev, phy_count, sizeof(*link), GFP_KERNEL);
- if (!link)
- return -ENOMEM;
-
for (i = 0; i < phy_count; i++) {
of_property_read_string_index(np, "phy-names", i, &name);
phy[i] = devm_phy_get(dev, name);
@@ -249,17 +244,10 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
ret = PTR_ERR(phy[i]);
goto err_phy;
}
- link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
- if (!link[i]) {
- devm_phy_put(dev, phy[i]);
- ret = -EINVAL;
- goto err_phy;
- }
}
pcie->phy_count = phy_count;
pcie->phy = phy;
- pcie->link = link;
ret = cdns_pcie_enable_phy(pcie);
if (ret)
@@ -268,10 +256,8 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
return 0;
err_phy:
- while (--i >= 0) {
- device_link_del(link[i]);
+ while (--i >= 0)
devm_phy_put(dev, phy[i]);
- }
return ret;
}
diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index d5d26229063f..b91ab37845c9 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -9,7 +9,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
-#include <linux/device.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -683,7 +682,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
int i;
int phy_count;
struct phy **phy;
- struct device_link **link;
void __iomem *base;
struct dw_pcie *pci;
struct dra7xx_pcie *dra7xx;
@@ -731,10 +729,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
if (!phy)
return -ENOMEM;
- link = devm_kcalloc(dev, phy_count, sizeof(*link), GFP_KERNEL);
- if (!link)
- return -ENOMEM;
-
dra7xx->clk = devm_clk_get_optional(dev, NULL);
if (IS_ERR(dra7xx->clk))
return dev_err_probe(dev, PTR_ERR(dra7xx->clk),
@@ -749,12 +743,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
phy[i] = devm_phy_get(dev, name);
if (IS_ERR(phy[i]))
return PTR_ERR(phy[i]);
-
- link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
- if (!link[i]) {
- ret = -EINVAL;
- goto err_link;
- }
}
dra7xx->base = base;
@@ -856,10 +844,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
pm_runtime_disable(dev);
dra7xx_pcie_disable_phy(dra7xx);
-err_link:
- while (--i >= 0)
- device_link_del(link[i]);
-
return ret;
}
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 642e4c45eefc..07698c645e02 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -130,7 +130,6 @@ struct keystone_pcie {
int num_lanes;
u32 num_viewport;
struct phy **phy;
- struct device_link **link;
struct device_node *msi_intc_np;
struct irq_domain *intx_irq_domain;
struct device_node *np;
@@ -1118,7 +1117,6 @@ static int ks_pcie_probe(struct platform_device *pdev)
enum dw_pcie_device_mode mode;
struct dw_pcie *pci;
struct keystone_pcie *ks_pcie;
- struct device_link **link;
struct gpio_desc *gpiod;
struct resource *res;
void __iomem *base;
@@ -1189,31 +1187,17 @@ static int ks_pcie_probe(struct platform_device *pdev)
if (!phy)
return -ENOMEM;
- link = devm_kcalloc(dev, num_lanes, sizeof(*link), GFP_KERNEL);
- if (!link)
- return -ENOMEM;
-
for (i = 0; i < num_lanes; i++) {
snprintf(name, sizeof(name), "pcie-phy%d", i);
phy[i] = devm_phy_optional_get(dev, name);
if (IS_ERR(phy[i])) {
ret = PTR_ERR(phy[i]);
- goto err_link;
- }
-
- if (!phy[i])
- continue;
-
- link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
- if (!link[i]) {
- ret = -EINVAL;
- goto err_link;
+ goto err;
}
}
ks_pcie->np = np;
ks_pcie->pci = pci;
- ks_pcie->link = link;
ks_pcie->num_lanes = num_lanes;
ks_pcie->phy = phy;
@@ -1223,7 +1207,7 @@ static int ks_pcie_probe(struct platform_device *pdev)
ret = PTR_ERR(gpiod);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get reset GPIO\n");
- goto err_link;
+ goto err;
}
/* Obtain references to the PHYs */
@@ -1238,7 +1222,7 @@ static int ks_pcie_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "failed to enable phy\n");
- goto err_link;
+ goto err;
}
platform_set_drvdata(pdev, ks_pcie);
@@ -1325,25 +1309,18 @@ static int ks_pcie_probe(struct platform_device *pdev)
pm_runtime_disable(dev);
ks_pcie_disable_phy(ks_pcie);
-err_link:
- while (--i >= 0 && link[i])
- device_link_del(link[i]);
-
+err:
return ret;
}
static void ks_pcie_remove(struct platform_device *pdev)
{
struct keystone_pcie *ks_pcie = platform_get_drvdata(pdev);
- struct device_link **link = ks_pcie->link;
- int num_lanes = ks_pcie->num_lanes;
struct device *dev = &pdev->dev;
pm_runtime_put(dev);
pm_runtime_disable(dev);
ks_pcie_disable_phy(ks_pcie);
- while (num_lanes--)
- device_link_del(link[num_lanes]);
}
static struct platform_driver ks_pcie_driver = {
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 09/22] ufs: exynos: stop poking into struct phy guts
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Alim Akhtar, Peter Griffin, James E.J. Bottomley,
Martin K. Petersen, Krzysztof Kozlowski
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
The Exynos host controller driver is clearly a PHY consumer (gets the
ufs->phy using devm_phy_get()), but pokes into the guts of struct phy
to get the generic_phy->power_count.
The UFS core (specifically ufshcd_link_startup()) may call the variant
operation exynos_ufs_pre_link() -> exynos_ufs_phy_init() multiple times
if the link startup fails and needs to be retried.
However ufs-exynos shouldn't be doing what it's doing, i.e. looking at
the generic_phy->power_count, because in the general sense of the API, a
single Generic PHY may have multiple consumers. If ufs-exynos looks at
generic_phy->power_count, there's no guarantee that *ufs-exynos* is the
one who previously bumped that power count. So it may be powering down
the PHY on behalf of another consumer.
The correct way in which this should be handled is ufs-exynos should
*remember* whether it has initialized and powered up the PHY before, and
power it down during link retries. Not rely on the power_count (which,
btw, on the writer side is modified under &phy->mutex, but on the reader
side is accessed unlocked). This is a discouraged pattern even if here
it doesn't cause functional problems.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/ufs/host/ufs-exynos.c | 17 ++++++++++++++---
drivers/ufs/host/ufs-exynos.h | 1 +
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 76fee3a79c77..eff2abbf9a9b 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -963,9 +963,10 @@ static int exynos_ufs_phy_init(struct exynos_ufs *ufs)
phy_set_bus_width(generic_phy, ufs->avail_ln_rx);
- if (generic_phy->power_count) {
+ if (ufs->phy_powered_on) {
phy_power_off(generic_phy);
phy_exit(generic_phy);
+ ufs->phy_powered_on = false;
}
ret = phy_init(generic_phy);
@@ -979,6 +980,8 @@ static int exynos_ufs_phy_init(struct exynos_ufs *ufs)
if (ret)
goto out_exit_phy;
+ ufs->phy_powered_on = true;
+
return 0;
out_exit_phy:
@@ -1737,9 +1740,17 @@ static int exynos_ufs_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
static int exynos_ufs_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
struct exynos_ufs *ufs = ufshcd_get_variant(hba);
+ int err;
- if (!ufshcd_is_link_active(hba))
- phy_power_on(ufs->phy);
+ if (!ufshcd_is_link_active(hba)) {
+ err = phy_power_on(ufs->phy);
+ if (err) {
+ dev_err(hba->dev, "Failed to power on PHY: %pe\n",
+ ERR_PTR(err));
+ } else {
+ ufs->phy_powered_on = true;
+ }
+ }
exynos_ufs_config_smu(ufs);
exynos_ufs_fmp_resume(hba);
diff --git a/drivers/ufs/host/ufs-exynos.h b/drivers/ufs/host/ufs-exynos.h
index abe7e472759e..683b9150e2ba 100644
--- a/drivers/ufs/host/ufs-exynos.h
+++ b/drivers/ufs/host/ufs-exynos.h
@@ -227,6 +227,7 @@ struct exynos_ufs {
int avail_ln_rx;
int avail_ln_tx;
int rx_sel_idx;
+ bool phy_powered_on;
struct ufs_pa_layer_attr dev_req_params;
struct ufs_phy_time_cfg t_cfg;
ktime_t entry_hibern8_t;
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 10/22] drm/rockchip: dw_hdmi: avoid direct dereference of phy->dev.of_node
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Sandy Huang, Heiko Stübner, Andy Yan, Maarten Lankhorst,
Maxime Ripard, Thomas Zimmermann, David Airlie, Simona Vetter
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
The dw_hdmi-rockchip driver validates pixel clock rates against the
HDMI PHY's internal clock provider on certain SoCs like RK3328.
This is currently achieved by dereferencing hdmi->phy->dev.of_node
to obtain the provider node, which violates the Generic PHY API's
encapsulation (the goal is for struct phy to be an opaque pointer).
Refactor dw_hdmi_rockchip_bind() to perform a manual phandle lookup
on the "hdmi" PHY index within the controller's DT node. This provides
a parallel path to the clock provider's OF node without relying on the
internal structure of the struct phy handle.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
---
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 25 ++++++++++++---------
1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 0dc1eb5d2ae3..7abb42e486c0 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -537,21 +537,22 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
void *data)
{
struct platform_device *pdev = to_platform_device(dev);
+ struct device_node *np = dev_of_node(dev);
struct dw_hdmi_plat_data *plat_data;
const struct of_device_id *match;
struct drm_device *drm = data;
struct drm_encoder *encoder;
struct rockchip_hdmi *hdmi;
- int ret;
+ int ret, index;
- if (!pdev->dev.of_node)
+ if (!np)
return -ENODEV;
hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
if (!hdmi)
return -ENOMEM;
- match = of_match_node(dw_hdmi_rockchip_dt_ids, pdev->dev.of_node);
+ match = of_match_node(dw_hdmi_rockchip_dt_ids, np);
plat_data = devm_kmemdup(&pdev->dev, match->data,
sizeof(*plat_data), GFP_KERNEL);
if (!plat_data)
@@ -564,9 +565,9 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
plat_data->priv_data = hdmi;
encoder = &hdmi->encoder.encoder;
- encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+ encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, np);
rockchip_drm_encoder_set_crtc_endpoint_id(&hdmi->encoder,
- dev->of_node, 0, 0);
+ np, 0, 0);
/*
* If we failed to find the CRTC(s) which this encoder is
@@ -588,13 +589,17 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
return dev_err_probe(hdmi->dev, ret, "failed to get phy\n");
}
- if (hdmi->phy) {
+ index = of_property_match_string(np, "phy-names", "hdmi");
+ if (index >= 0) {
struct of_phandle_args clkspec;
- clkspec.np = hdmi->phy->dev.of_node;
- hdmi->hdmiphy_clk = of_clk_get_from_provider(&clkspec);
- if (IS_ERR(hdmi->hdmiphy_clk))
- hdmi->hdmiphy_clk = NULL;
+ if (!of_parse_phandle_with_args(np, "phys", "#phy-cells", index,
+ &clkspec)) {
+ hdmi->hdmiphy_clk = of_clk_get_from_provider(&clkspec);
+ of_node_put(clkspec.np);
+ if (IS_ERR(hdmi->hdmiphy_clk))
+ hdmi->hdmiphy_clk = NULL;
+ }
}
if (hdmi->chip_data == &rk3568_chip_data) {
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 11/22] drm/msm/dp: remove debugging prints with internal struct phy state
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Rob Clark, Dmitry Baryshkov, Abhinav Kumar, Jessica Zhang,
Sean Paul, Marijn Suijten, David Airlie, Simona Vetter
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
These do not provide much value, and will become hard to maintain once
the Generic PHY framework starts hiding the contents of struct phy from
consumers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Abhinav Kumar <abhinav.kumar@linux.dev>
Cc: Jessica Zhang <jesszhan0024@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
---
drivers/gpu/drm/msm/dp/dp_ctrl.c | 18 ------------------
1 file changed, 18 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index ef298c7d3e5e..cba8a71a2561 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1928,9 +1928,6 @@ void msm_dp_ctrl_phy_init(struct msm_dp_ctrl *msm_dp_ctrl)
msm_dp_ctrl_phy_reset(ctrl);
phy_init(phy);
-
- drm_dbg_dp(ctrl->drm_dev, "phy=%p init=%d power_on=%d\n",
- phy, phy->init_count, phy->power_count);
}
void msm_dp_ctrl_phy_exit(struct msm_dp_ctrl *msm_dp_ctrl)
@@ -1943,8 +1940,6 @@ void msm_dp_ctrl_phy_exit(struct msm_dp_ctrl *msm_dp_ctrl)
msm_dp_ctrl_phy_reset(ctrl);
phy_exit(phy);
- drm_dbg_dp(ctrl->drm_dev, "phy=%p init=%d power_on=%d\n",
- phy, phy->init_count, phy->power_count);
}
static int msm_dp_ctrl_reinitialize_mainlink(struct msm_dp_ctrl_private *ctrl)
@@ -1996,8 +1991,6 @@ static int msm_dp_ctrl_deinitialize_mainlink(struct msm_dp_ctrl_private *ctrl)
phy_exit(phy);
phy_init(phy);
- drm_dbg_dp(ctrl->drm_dev, "phy=%p init=%d power_on=%d\n",
- phy, phy->init_count, phy->power_count);
return 0;
}
@@ -2588,9 +2581,6 @@ void msm_dp_ctrl_off_link_stream(struct msm_dp_ctrl *msm_dp_ctrl)
/* aux channel down, reinit phy */
phy_exit(phy);
phy_init(phy);
-
- drm_dbg_dp(ctrl->drm_dev, "phy=%p init=%d power_on=%d\n",
- phy, phy->init_count, phy->power_count);
}
void msm_dp_ctrl_off_link(struct msm_dp_ctrl *msm_dp_ctrl)
@@ -2606,13 +2596,7 @@ void msm_dp_ctrl_off_link(struct msm_dp_ctrl *msm_dp_ctrl)
dev_pm_opp_set_rate(ctrl->dev, 0);
msm_dp_ctrl_link_clk_disable(&ctrl->msm_dp_ctrl);
- DRM_DEBUG_DP("Before, phy=%p init_count=%d power_on=%d\n",
- phy, phy->init_count, phy->power_count);
-
phy_power_off(phy);
-
- DRM_DEBUG_DP("After, phy=%p init_count=%d power_on=%d\n",
- phy, phy->init_count, phy->power_count);
}
void msm_dp_ctrl_off(struct msm_dp_ctrl *msm_dp_ctrl)
@@ -2638,8 +2622,6 @@ void msm_dp_ctrl_off(struct msm_dp_ctrl *msm_dp_ctrl)
msm_dp_ctrl_link_clk_disable(&ctrl->msm_dp_ctrl);
phy_power_off(phy);
- drm_dbg_dp(ctrl->drm_dev, "phy=%p init=%d power_on=%d\n",
- phy, phy->init_count, phy->power_count);
}
irqreturn_t msm_dp_ctrl_isr(struct msm_dp_ctrl *msm_dp_ctrl)
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 12/22] phy: move provider API out of public <linux/phy/phy.h>
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
The major goal is to hide the contents of struct phy from consumer
drivers.
The idea with "phy-props.h" is that both consumers and providers make
use of some data types. So both headers include "phy-props.h".
Two slight points of contention.
1. phy_set_bus_width(): Vinod explains that despite the current caller
situation (9 providers, 1 consumer), it is a consumer API function.
The use case is that the controller (for example UFS) may have
limitations and should set the expected lanes to be used and width on
those lanes. A number of Generic PHYs can support multiple lanes and
multiple width so this is way for controller telling I am using this
configuration.
2. phy-provider.h should go to include/linux/phy/ or to drivers/phy/?
We do have 3 PHY providers outside of drivers/phy/:
drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
but the practice is not encouraged, and with time, these should be
moved to the subsystem. This is not something that I can do now.
For temporary compatibility, keep including the provider header. This
will be removed when abuses are all gotten rid of.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
drivers/phy/phy-core.c | 34 +++
drivers/phy/phy-provider.h | 256 +++++++++++++++++
include/linux/phy/phy-props.h | 75 +++++
include/linux/phy/phy.h | 499 +++++++---------------------------
4 files changed, 458 insertions(+), 406 deletions(-)
create mode 100644 drivers/phy/phy-provider.h
create mode 100644 include/linux/phy/phy-props.h
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 21aaf2f76e53..a1aff00fba7c 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -20,6 +20,22 @@
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
+#define to_phy(a) (container_of((a), struct phy, dev))
+
+/**
+ * struct phy_lookup - PHY association in list of phys managed by the phy driver
+ * @node: list node
+ * @dev_id: the device of the association
+ * @con_id: connection ID string on device
+ * @phy: the phy of the association
+ */
+struct phy_lookup {
+ struct list_head node;
+ const char *dev_id;
+ const char *con_id;
+ struct phy *phy;
+};
+
static void phy_release(struct device *dev);
static const struct class phy_class = {
.name = "phy",
@@ -606,6 +622,24 @@ int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
}
EXPORT_SYMBOL_GPL(phy_validate);
+enum phy_mode phy_get_mode(struct phy *phy)
+{
+ return phy->attrs.mode;
+}
+EXPORT_SYMBOL_GPL(phy_get_mode);
+
+int phy_get_bus_width(struct phy *phy)
+{
+ return phy->attrs.bus_width;
+}
+EXPORT_SYMBOL_GPL(phy_get_bus_width);
+
+void phy_set_bus_width(struct phy *phy, int bus_width)
+{
+ phy->attrs.bus_width = bus_width;
+}
+EXPORT_SYMBOL_GPL(phy_set_bus_width);
+
/**
* _of_phy_get() - lookup and obtain a reference to a phy by phandle
* @np: device_node for which to get the phy
diff --git a/drivers/phy/phy-provider.h b/drivers/phy/phy-provider.h
new file mode 100644
index 000000000000..0637278a2d8d
--- /dev/null
+++ b/drivers/phy/phy-provider.h
@@ -0,0 +1,256 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * phy-provider.h -- Generic PHY provider API
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+#ifndef __PHY_PROVIDER_H
+#define __PHY_PROVIDER_H
+
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/phy/phy-props.h>
+
+struct phy;
+
+/**
+ * struct phy_ops - set of function pointers for performing phy operations
+ * @init: operation to be performed for initializing phy
+ * @exit: operation to be performed while exiting
+ * @power_on: powering on the phy
+ * @power_off: powering off the phy
+ * @set_mode: set the mode of the phy
+ * @set_media: set the media type of the phy (optional)
+ * @set_speed: set the speed of the phy (optional)
+ * @reset: resetting the phy
+ * @calibrate: calibrate the phy
+ * @notify_phystate: notify and configure the phy for a particular state
+ * @release: ops to be performed while the consumer relinquishes the PHY
+ * @owner: the module owner containing the ops
+ */
+struct phy_ops {
+ int (*init)(struct phy *phy);
+ int (*exit)(struct phy *phy);
+ int (*power_on)(struct phy *phy);
+ int (*power_off)(struct phy *phy);
+ int (*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
+ int (*set_media)(struct phy *phy, enum phy_media media);
+ int (*set_speed)(struct phy *phy, int speed);
+
+ /**
+ * @configure:
+ *
+ * Optional.
+ *
+ * Used to change the PHY parameters. phy_init() must have
+ * been called on the phy.
+ *
+ * Returns: 0 if successful, an negative error code otherwise
+ */
+ int (*configure)(struct phy *phy, union phy_configure_opts *opts);
+
+ /**
+ * @validate:
+ *
+ * Optional.
+ *
+ * Used to check that the current set of parameters can be
+ * handled by the phy. Implementations are free to tune the
+ * parameters passed as arguments if needed by some
+ * implementation detail or constraints. It must not change
+ * any actual configuration of the PHY, so calling it as many
+ * times as deemed fit by the consumer must have no side
+ * effect.
+ *
+ * Returns: 0 if the configuration can be applied, an negative
+ * error code otherwise
+ */
+ int (*validate)(struct phy *phy, enum phy_mode mode, int submode,
+ union phy_configure_opts *opts);
+ int (*reset)(struct phy *phy);
+ int (*calibrate)(struct phy *phy);
+
+ /* notify phy connect status change */
+ int (*connect)(struct phy *phy, int port);
+ int (*disconnect)(struct phy *phy, int port);
+
+ int (*notify_phystate)(struct phy *phy, union phy_notify state);
+ void (*release)(struct phy *phy);
+ struct module *owner;
+};
+
+/**
+ * struct phy_attrs - represents phy attributes
+ * @bus_width: Data path width implemented by PHY
+ * @max_link_rate: Maximum link rate supported by PHY (units to be decided by producer and consumer)
+ * @mode: PHY mode
+ */
+struct phy_attrs {
+ u32 bus_width;
+ u32 max_link_rate;
+ enum phy_mode mode;
+};
+
+/**
+ * struct phy - represents the phy device
+ * @dev: phy device
+ * @id: id of the phy device
+ * @ops: function pointers for performing phy operations
+ * @mutex: mutex to protect phy_ops
+ * @lockdep_key: lockdep information for this mutex
+ * @init_count: used to protect when the PHY is used by multiple consumers
+ * @power_count: used to protect when the PHY is used by multiple consumers
+ * @attrs: used to specify PHY specific attributes
+ * @pwr: power regulator associated with the phy
+ * @debugfs: debugfs directory
+ */
+struct phy {
+ struct device dev;
+ int id;
+ const struct phy_ops *ops;
+ struct mutex mutex;
+ struct lock_class_key lockdep_key;
+ int init_count;
+ int power_count;
+ struct phy_attrs attrs;
+ struct regulator *pwr;
+ struct dentry *debugfs;
+};
+
+/**
+ * struct phy_provider - represents the phy provider
+ * @dev: phy provider device
+ * @children: can be used to override the default (dev->of_node) child node
+ * @owner: the module owner having of_xlate
+ * @list: to maintain a linked list of PHY providers
+ * @of_xlate: function pointer to obtain phy instance from phy pointer
+ */
+struct phy_provider {
+ struct device *dev;
+ struct device_node *children;
+ struct module *owner;
+ struct list_head list;
+ struct phy *(*of_xlate)(struct device *dev,
+ const struct of_phandle_args *args);
+};
+
+#define of_phy_provider_register(dev, xlate) \
+ __of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+
+#define devm_of_phy_provider_register(dev, xlate) \
+ __devm_of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+
+#define of_phy_provider_register_full(dev, children, xlate) \
+ __of_phy_provider_register(dev, children, THIS_MODULE, xlate)
+
+#define devm_of_phy_provider_register_full(dev, children, xlate) \
+ __devm_of_phy_provider_register(dev, children, THIS_MODULE, xlate)
+
+static inline void phy_set_drvdata(struct phy *phy, void *data)
+{
+ dev_set_drvdata(&phy->dev, data);
+}
+
+static inline void *phy_get_drvdata(struct phy *phy)
+{
+ return dev_get_drvdata(&phy->dev);
+}
+
+#if IS_ENABLED(CONFIG_GENERIC_PHY)
+struct phy *phy_create(struct device *dev, struct device_node *node,
+ const struct phy_ops *ops);
+struct phy *devm_phy_create(struct device *dev, struct device_node *node,
+ const struct phy_ops *ops);
+void phy_destroy(struct phy *phy);
+void devm_phy_destroy(struct device *dev, struct phy *phy);
+
+struct phy_provider *
+__of_phy_provider_register(struct device *dev, struct device_node *children,
+ struct module *owner,
+ struct phy *(*of_xlate)(struct device *dev,
+ const struct of_phandle_args *args));
+struct phy_provider *
+__devm_of_phy_provider_register(struct device *dev, struct device_node *children,
+ struct module *owner,
+ struct phy *(*of_xlate)(struct device *dev,
+ const struct of_phandle_args *args));
+void of_phy_provider_unregister(struct phy_provider *phy_provider);
+void devm_of_phy_provider_unregister(struct device *dev,
+ struct phy_provider *phy_provider);
+int phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id);
+void phy_remove_lookup(struct phy *phy, const char *con_id, const char *dev_id);
+struct phy *of_phy_simple_xlate(struct device *dev,
+ const struct of_phandle_args *args);
+#else
+static inline struct phy *phy_create(struct device *dev,
+ struct device_node *node,
+ const struct phy_ops *ops)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_phy_create(struct device *dev,
+ struct device_node *node,
+ const struct phy_ops *ops)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline void phy_destroy(struct phy *phy)
+{
+}
+
+static inline void devm_phy_destroy(struct device *dev, struct phy *phy)
+{
+}
+
+static inline struct phy_provider *
+__of_phy_provider_register(struct device *dev, struct device_node *children,
+ struct module *owner,
+ struct phy *(*of_xlate)(struct device *dev,
+ const struct of_phandle_args *args))
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy_provider *
+__devm_of_phy_provider_register(struct device *dev, struct device_node *children,
+ struct module *owner,
+ struct phy *(*of_xlate)(struct device *dev,
+ const struct of_phandle_args *args))
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline void of_phy_provider_unregister(struct phy_provider *phy_provider)
+{
+}
+
+static inline void devm_of_phy_provider_unregister(struct device *dev,
+ struct phy_provider *phy_provider)
+{
+}
+
+static inline int phy_create_lookup(struct phy *phy, const char *con_id,
+ const char *dev_id)
+{
+ return 0;
+}
+
+static inline void phy_remove_lookup(struct phy *phy, const char *con_id,
+ const char *dev_id)
+{
+}
+
+static inline struct phy *of_phy_simple_xlate(struct device *dev,
+ const struct of_phandle_args *args)
+{
+ return ERR_PTR(-ENOSYS);
+}
+#endif /* IS_ENABLED(CONFIG_GENERIC_PHY) */
+
+#endif /* __PHY_PROVIDER_H */
diff --git a/include/linux/phy/phy-props.h b/include/linux/phy/phy-props.h
new file mode 100644
index 000000000000..11f36738165f
--- /dev/null
+++ b/include/linux/phy/phy-props.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * phy-provider.h -- Generic PHY properties
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+#ifndef __PHY_PROPS_H
+#define __PHY_PROPS_H
+
+#include <linux/phy/phy-dp.h>
+#include <linux/phy/phy-hdmi.h>
+#include <linux/phy/phy-lvds.h>
+#include <linux/phy/phy-mipi-dphy.h>
+
+enum phy_mode {
+ PHY_MODE_INVALID,
+ PHY_MODE_USB_HOST,
+ PHY_MODE_USB_HOST_LS,
+ PHY_MODE_USB_HOST_FS,
+ PHY_MODE_USB_HOST_HS,
+ PHY_MODE_USB_HOST_SS,
+ PHY_MODE_USB_DEVICE,
+ PHY_MODE_USB_DEVICE_LS,
+ PHY_MODE_USB_DEVICE_FS,
+ PHY_MODE_USB_DEVICE_HS,
+ PHY_MODE_USB_DEVICE_SS,
+ PHY_MODE_USB_OTG,
+ PHY_MODE_UFS_HS_A,
+ PHY_MODE_UFS_HS_B,
+ PHY_MODE_PCIE,
+ PHY_MODE_ETHERNET,
+ PHY_MODE_MIPI_DPHY,
+ PHY_MODE_SATA,
+ PHY_MODE_LVDS,
+ PHY_MODE_DP,
+ PHY_MODE_HDMI,
+};
+
+enum phy_media {
+ PHY_MEDIA_DEFAULT,
+ PHY_MEDIA_SR,
+ PHY_MEDIA_DAC,
+};
+
+enum phy_ufs_state {
+ PHY_UFS_HIBERN8_ENTER,
+ PHY_UFS_HIBERN8_EXIT,
+};
+
+union phy_notify {
+ enum phy_ufs_state ufs_state;
+};
+
+/**
+ * union phy_configure_opts - Opaque generic phy configuration
+ *
+ * @mipi_dphy: Configuration set applicable for phys supporting
+ * the MIPI_DPHY phy mode.
+ * @dp: Configuration set applicable for phys supporting
+ * the DisplayPort protocol.
+ * @lvds: Configuration set applicable for phys supporting
+ * the LVDS phy mode.
+ * @hdmi: Configuration set applicable for phys supporting
+ * the HDMI phy mode.
+ */
+union phy_configure_opts {
+ struct phy_configure_opts_mipi_dphy mipi_dphy;
+ struct phy_configure_opts_dp dp;
+ struct phy_configure_opts_lvds lvds;
+ struct phy_configure_opts_hdmi hdmi;
+};
+
+#endif /* __PHY_PROPS_H */
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index ea47975e288a..36307e47760d 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -1,246 +1,38 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
- * phy.h -- generic phy header file
+ * phy.h -- Generic PHY consumer API
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
*
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*/
-#ifndef __DRIVERS_PHY_H
-#define __DRIVERS_PHY_H
+#ifndef __PHY_CONSUMER_H
+#define __PHY_CONSUMER_H
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/device.h>
-#include <linux/pm_runtime.h>
-#include <linux/regulator/consumer.h>
+#include <linux/phy/phy-props.h>
-#include <linux/phy/phy-dp.h>
-#include <linux/phy/phy-hdmi.h>
-#include <linux/phy/phy-lvds.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../../drivers/phy/phy-provider.h"
+struct device;
+struct device_node;
struct phy;
-enum phy_mode {
- PHY_MODE_INVALID,
- PHY_MODE_USB_HOST,
- PHY_MODE_USB_HOST_LS,
- PHY_MODE_USB_HOST_FS,
- PHY_MODE_USB_HOST_HS,
- PHY_MODE_USB_HOST_SS,
- PHY_MODE_USB_DEVICE,
- PHY_MODE_USB_DEVICE_LS,
- PHY_MODE_USB_DEVICE_FS,
- PHY_MODE_USB_DEVICE_HS,
- PHY_MODE_USB_DEVICE_SS,
- PHY_MODE_USB_OTG,
- PHY_MODE_UFS_HS_A,
- PHY_MODE_UFS_HS_B,
- PHY_MODE_PCIE,
- PHY_MODE_ETHERNET,
- PHY_MODE_MIPI_DPHY,
- PHY_MODE_SATA,
- PHY_MODE_LVDS,
- PHY_MODE_DP,
- PHY_MODE_HDMI,
-};
-
-enum phy_media {
- PHY_MEDIA_DEFAULT,
- PHY_MEDIA_SR,
- PHY_MEDIA_DAC,
-};
-
-enum phy_ufs_state {
- PHY_UFS_HIBERN8_ENTER,
- PHY_UFS_HIBERN8_EXIT,
-};
-
-union phy_notify {
- enum phy_ufs_state ufs_state;
-};
-
-/**
- * union phy_configure_opts - Opaque generic phy configuration
- *
- * @mipi_dphy: Configuration set applicable for phys supporting
- * the MIPI_DPHY phy mode.
- * @dp: Configuration set applicable for phys supporting
- * the DisplayPort protocol.
- * @lvds: Configuration set applicable for phys supporting
- * the LVDS phy mode.
- * @hdmi: Configuration set applicable for phys supporting
- * the HDMI phy mode.
- */
-union phy_configure_opts {
- struct phy_configure_opts_mipi_dphy mipi_dphy;
- struct phy_configure_opts_dp dp;
- struct phy_configure_opts_lvds lvds;
- struct phy_configure_opts_hdmi hdmi;
-};
-
-/**
- * struct phy_ops - set of function pointers for performing phy operations
- * @init: operation to be performed for initializing phy
- * @exit: operation to be performed while exiting
- * @power_on: powering on the phy
- * @power_off: powering off the phy
- * @set_mode: set the mode of the phy
- * @set_media: set the media type of the phy (optional)
- * @set_speed: set the speed of the phy (optional)
- * @reset: resetting the phy
- * @calibrate: calibrate the phy
- * @notify_phystate: notify and configure the phy for a particular state
- * @release: ops to be performed while the consumer relinquishes the PHY
- * @owner: the module owner containing the ops
- */
-struct phy_ops {
- int (*init)(struct phy *phy);
- int (*exit)(struct phy *phy);
- int (*power_on)(struct phy *phy);
- int (*power_off)(struct phy *phy);
- int (*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
- int (*set_media)(struct phy *phy, enum phy_media media);
- int (*set_speed)(struct phy *phy, int speed);
-
- /**
- * @configure:
- *
- * Optional.
- *
- * Used to change the PHY parameters. phy_init() must have
- * been called on the phy.
- *
- * Returns: 0 if successful, an negative error code otherwise
- */
- int (*configure)(struct phy *phy, union phy_configure_opts *opts);
-
- /**
- * @validate:
- *
- * Optional.
- *
- * Used to check that the current set of parameters can be
- * handled by the phy. Implementations are free to tune the
- * parameters passed as arguments if needed by some
- * implementation detail or constraints. It must not change
- * any actual configuration of the PHY, so calling it as many
- * times as deemed fit by the consumer must have no side
- * effect.
- *
- * Returns: 0 if the configuration can be applied, an negative
- * error code otherwise
- */
- int (*validate)(struct phy *phy, enum phy_mode mode, int submode,
- union phy_configure_opts *opts);
- int (*reset)(struct phy *phy);
- int (*calibrate)(struct phy *phy);
-
- /* notify phy connect status change */
- int (*connect)(struct phy *phy, int port);
- int (*disconnect)(struct phy *phy, int port);
-
- int (*notify_phystate)(struct phy *phy, union phy_notify state);
- void (*release)(struct phy *phy);
- struct module *owner;
-};
-
-/**
- * struct phy_attrs - represents phy attributes
- * @bus_width: Data path width implemented by PHY
- * @max_link_rate: Maximum link rate supported by PHY (units to be decided by producer and consumer)
- * @mode: PHY mode
- */
-struct phy_attrs {
- u32 bus_width;
- u32 max_link_rate;
- enum phy_mode mode;
-};
-
-/**
- * struct phy - represents the phy device
- * @dev: phy device
- * @id: id of the phy device
- * @ops: function pointers for performing phy operations
- * @mutex: mutex to protect phy_ops
- * @lockdep_key: lockdep information for this mutex
- * @init_count: used to protect when the PHY is used by multiple consumers
- * @power_count: used to protect when the PHY is used by multiple consumers
- * @attrs: used to specify PHY specific attributes
- * @pwr: power regulator associated with the phy
- * @debugfs: debugfs directory
- */
-struct phy {
- struct device dev;
- int id;
- const struct phy_ops *ops;
- struct mutex mutex;
- struct lock_class_key lockdep_key;
- int init_count;
- int power_count;
- struct phy_attrs attrs;
- struct regulator *pwr;
- struct dentry *debugfs;
-};
-
-/**
- * struct phy_provider - represents the phy provider
- * @dev: phy provider device
- * @children: can be used to override the default (dev->of_node) child node
- * @owner: the module owner having of_xlate
- * @list: to maintain a linked list of PHY providers
- * @of_xlate: function pointer to obtain phy instance from phy pointer
- */
-struct phy_provider {
- struct device *dev;
- struct device_node *children;
- struct module *owner;
- struct list_head list;
- struct phy * (*of_xlate)(struct device *dev,
- const struct of_phandle_args *args);
-};
-
-/**
- * struct phy_lookup - PHY association in list of phys managed by the phy driver
- * @node: list node
- * @dev_id: the device of the association
- * @con_id: connection ID string on device
- * @phy: the phy of the association
- */
-struct phy_lookup {
- struct list_head node;
- const char *dev_id;
- const char *con_id;
- struct phy *phy;
-};
-
-#define to_phy(a) (container_of((a), struct phy, dev))
-
-#define of_phy_provider_register(dev, xlate) \
- __of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
-
-#define devm_of_phy_provider_register(dev, xlate) \
- __devm_of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
-
-#define of_phy_provider_register_full(dev, children, xlate) \
- __of_phy_provider_register(dev, children, THIS_MODULE, xlate)
-
-#define devm_of_phy_provider_register_full(dev, children, xlate) \
- __devm_of_phy_provider_register(dev, children, THIS_MODULE, xlate)
-
-static inline void phy_set_drvdata(struct phy *phy, void *data)
-{
- dev_set_drvdata(&phy->dev, data);
-}
-
-static inline void *phy_get_drvdata(struct phy *phy)
-{
- return dev_get_drvdata(&phy->dev);
-}
-
#if IS_ENABLED(CONFIG_GENERIC_PHY)
+struct phy *phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+struct phy *devm_of_phy_get(struct device *dev, struct device_node *np,
+ const char *con_id);
+struct phy *devm_of_phy_optional_get(struct device *dev, struct device_node *np,
+ const char *con_id);
+struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
+ int index);
+void of_phy_put(struct phy *phy);
+void phy_put(struct device *dev, struct phy *phy);
+void devm_phy_put(struct device *dev, struct phy *phy);
+struct phy *of_phy_get(struct device_node *np, const char *con_id);
+
int phy_pm_runtime_get(struct phy *phy);
int phy_pm_runtime_get_sync(struct phy *phy);
void phy_pm_runtime_put(struct phy *phy);
@@ -257,59 +49,69 @@ int phy_set_speed(struct phy *phy, int speed);
int phy_configure(struct phy *phy, union phy_configure_opts *opts);
int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
union phy_configure_opts *opts);
-
-static inline enum phy_mode phy_get_mode(struct phy *phy)
-{
- return phy->attrs.mode;
-}
+enum phy_mode phy_get_mode(struct phy *phy);
int phy_reset(struct phy *phy);
int phy_calibrate(struct phy *phy);
int phy_notify_connect(struct phy *phy, int port);
int phy_notify_disconnect(struct phy *phy, int port);
int phy_notify_state(struct phy *phy, union phy_notify state);
-static inline int phy_get_bus_width(struct phy *phy)
+int phy_get_bus_width(struct phy *phy);
+void phy_set_bus_width(struct phy *phy, int bus_width);
+#else
+static inline struct phy *phy_get(struct device *dev, const char *string)
{
- return phy->attrs.bus_width;
+ return ERR_PTR(-ENOSYS);
}
-static inline void phy_set_bus_width(struct phy *phy, int bus_width)
+
+static inline struct phy *devm_phy_get(struct device *dev, const char *string)
{
- phy->attrs.bus_width = bus_width;
+ return ERR_PTR(-ENOSYS);
}
-struct phy *phy_get(struct device *dev, const char *string);
-struct phy *devm_phy_get(struct device *dev, const char *string);
-struct phy *devm_phy_optional_get(struct device *dev, const char *string);
-struct phy *devm_of_phy_get(struct device *dev, struct device_node *np,
- const char *con_id);
-struct phy *devm_of_phy_optional_get(struct device *dev, struct device_node *np,
- const char *con_id);
-struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
- int index);
-void of_phy_put(struct phy *phy);
-void phy_put(struct device *dev, struct phy *phy);
-void devm_phy_put(struct device *dev, struct phy *phy);
-struct phy *of_phy_get(struct device_node *np, const char *con_id);
-struct phy *of_phy_simple_xlate(struct device *dev,
- const struct of_phandle_args *args);
-struct phy *phy_create(struct device *dev, struct device_node *node,
- const struct phy_ops *ops);
-struct phy *devm_phy_create(struct device *dev, struct device_node *node,
- const struct phy_ops *ops);
-void phy_destroy(struct phy *phy);
-void devm_phy_destroy(struct device *dev, struct phy *phy);
-struct phy_provider *__of_phy_provider_register(struct device *dev,
- struct device_node *children, struct module *owner,
- struct phy * (*of_xlate)(struct device *dev,
- const struct of_phandle_args *args));
-struct phy_provider *__devm_of_phy_provider_register(struct device *dev,
- struct device_node *children, struct module *owner,
- struct phy * (*of_xlate)(struct device *dev,
- const struct of_phandle_args *args));
-void of_phy_provider_unregister(struct phy_provider *phy_provider);
-void devm_of_phy_provider_unregister(struct device *dev,
- struct phy_provider *phy_provider);
-int phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id);
-void phy_remove_lookup(struct phy *phy, const char *con_id, const char *dev_id);
-#else
+
+static inline struct phy *devm_phy_optional_get(struct device *dev,
+ const char *string)
+{
+ return NULL;
+}
+
+static inline struct phy *devm_of_phy_get(struct device *dev,
+ struct device_node *np,
+ const char *con_id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_of_phy_optional_get(struct device *dev,
+ struct device_node *np,
+ const char *con_id)
+{
+ return NULL;
+}
+
+static inline struct phy *devm_of_phy_get_by_index(struct device *dev,
+ struct device_node *np,
+ int index)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline void of_phy_put(struct phy *phy)
+{
+}
+
+static inline void phy_put(struct device *dev, struct phy *phy)
+{
+}
+
+static inline void devm_phy_put(struct device *dev, struct phy *phy)
+{
+}
+
+static inline struct phy *of_phy_get(struct device_node *np, const char *con_id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
static inline int phy_pm_runtime_get(struct phy *phy)
{
if (!phy)
@@ -388,61 +190,61 @@ static inline int phy_set_speed(struct phy *phy, int speed)
return -ENODEV;
}
-static inline enum phy_mode phy_get_mode(struct phy *phy)
-{
- return PHY_MODE_INVALID;
-}
-
-static inline int phy_reset(struct phy *phy)
+static inline int phy_configure(struct phy *phy,
+ union phy_configure_opts *opts)
{
if (!phy)
return 0;
+
return -ENOSYS;
}
-static inline int phy_calibrate(struct phy *phy)
+static inline int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
+ union phy_configure_opts *opts)
{
if (!phy)
return 0;
+
return -ENOSYS;
}
-static inline int phy_notify_connect(struct phy *phy, int index)
+static inline enum phy_mode phy_get_mode(struct phy *phy)
+{
+ return PHY_MODE_INVALID;
+}
+
+static inline int phy_reset(struct phy *phy)
{
if (!phy)
return 0;
return -ENOSYS;
}
-static inline int phy_notify_disconnect(struct phy *phy, int index)
+static inline int phy_calibrate(struct phy *phy)
{
if (!phy)
return 0;
return -ENOSYS;
}
-static inline int phy_notify_state(struct phy *phy, union phy_notify state)
+static inline int phy_notify_connect(struct phy *phy, int index)
{
if (!phy)
return 0;
return -ENOSYS;
}
-static inline int phy_configure(struct phy *phy,
- union phy_configure_opts *opts)
+static inline int phy_notify_disconnect(struct phy *phy, int index)
{
if (!phy)
return 0;
-
return -ENOSYS;
}
-static inline int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
- union phy_configure_opts *opts)
+static inline int phy_notify_state(struct phy *phy, union phy_notify state)
{
if (!phy)
return 0;
-
return -ENOSYS;
}
@@ -453,122 +255,7 @@ static inline int phy_get_bus_width(struct phy *phy)
static inline void phy_set_bus_width(struct phy *phy, int bus_width)
{
- return;
-}
-
-static inline struct phy *phy_get(struct device *dev, const char *string)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_phy_get(struct device *dev, const char *string)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_phy_optional_get(struct device *dev,
- const char *string)
-{
- return NULL;
-}
-
-static inline struct phy *devm_of_phy_get(struct device *dev,
- struct device_node *np,
- const char *con_id)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_of_phy_optional_get(struct device *dev,
- struct device_node *np,
- const char *con_id)
-{
- return NULL;
-}
-
-static inline struct phy *devm_of_phy_get_by_index(struct device *dev,
- struct device_node *np,
- int index)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline void of_phy_put(struct phy *phy)
-{
-}
-
-static inline void phy_put(struct device *dev, struct phy *phy)
-{
-}
-
-static inline void devm_phy_put(struct device *dev, struct phy *phy)
-{
-}
-
-static inline struct phy *of_phy_get(struct device_node *np, const char *con_id)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *of_phy_simple_xlate(struct device *dev,
- const struct of_phandle_args *args)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *phy_create(struct device *dev,
- struct device_node *node,
- const struct phy_ops *ops)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_phy_create(struct device *dev,
- struct device_node *node,
- const struct phy_ops *ops)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline void phy_destroy(struct phy *phy)
-{
-}
-
-static inline void devm_phy_destroy(struct device *dev, struct phy *phy)
-{
-}
-
-static inline struct phy_provider *__of_phy_provider_register(
- struct device *dev, struct device_node *children, struct module *owner,
- struct phy * (*of_xlate)(struct device *dev,
- const struct of_phandle_args *args))
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy_provider *__devm_of_phy_provider_register(struct device
- *dev, struct device_node *children, struct module *owner,
- struct phy * (*of_xlate)(struct device *dev,
- const struct of_phandle_args *args))
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline void of_phy_provider_unregister(struct phy_provider *phy_provider)
-{
-}
-
-static inline void devm_of_phy_provider_unregister(struct device *dev,
- struct phy_provider *phy_provider)
-{
-}
-static inline int
-phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id)
-{
- return 0;
}
-static inline void phy_remove_lookup(struct phy *phy, const char *con_id,
- const char *dev_id) { }
-#endif
+#endif /* IS_ENABLED(CONFIG_GENERIC_PHY) */
-#endif /* __DRIVERS_PHY_H */
+#endif /* __PHY_CONSUMER_H */
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 13/22] phy: introduce phy_get_max_link_rate() helper for consumers
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Andrzej Hajda, Robert Foss, Laurent Pinchart, Jonas Karlman,
Jernej Skrabec, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Simona Vetter, Andy Yan,
Marc Kleine-Budde, Vincent Mailhol, Nicolas Ferre,
Alexandre Belloni, Claudiu Beznea, Markus Schneider-Pargmann,
Geert Uytterhoeven, Magnus Damm
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
Consumer drivers shouldn't dereference struct phy, not even to get to
its attributes.
We have phy_get_bus_width() as a precedent for getting the bus_width
attribute, so let's add phy_get_max_link_rate() and use it in DRM and
CAN drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>
---
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 4 ++--
drivers/gpu/drm/bridge/synopsys/dw-dp.c | 2 +-
drivers/net/can/at91_can.c | 2 +-
drivers/net/can/flexcan/flexcan-core.c | 2 +-
drivers/net/can/m_can/m_can_platform.c | 2 +-
drivers/net/can/rcar/rcar_canfd.c | 2 +-
drivers/phy/phy-core.c | 6 ++++++
include/linux/phy/phy.h | 6 ++++++
8 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index a8b6ae58cb0a..ed7ed82ddb64 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1300,7 +1300,7 @@ static u32 cdns_mhdp_get_training_interval_us(struct cdns_mhdp_device *mhdp,
static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
{
- unsigned int link_rate;
+ u32 link_rate;
/* Get source capabilities based on PHY attributes */
@@ -1308,7 +1308,7 @@ static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
if (!mhdp->host.lanes_cnt)
mhdp->host.lanes_cnt = 4;
- link_rate = mhdp->phy->attrs.max_link_rate;
+ link_rate = phy_get_max_link_rate(mhdp->phy);
if (!link_rate)
link_rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_8_1);
else
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 4ab6922dd79c..79c72ee8e263 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -536,7 +536,7 @@ static int dw_dp_link_parse(struct dw_dp *dp, struct drm_connector *connector)
link->revision = link->dpcd[DP_DPCD_REV];
link->rate = min_t(u32, min(dp->plat_data.max_link_rate,
- dp->phy->attrs.max_link_rate * 100),
+ phy_get_max_link_rate(dp->phy) * 100),
drm_dp_max_link_rate(link->dpcd));
link->lanes = min_t(u8, phy_get_bus_width(dp->phy),
drm_dp_max_lane_count(link->dpcd));
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 58da323f14d7..b56db253f02d 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1126,7 +1126,7 @@ static int at91_can_probe(struct platform_device *pdev)
can_rx_offload_add_timestamp(dev, &priv->offload);
if (transceiver)
- priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+ priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
if (at91_is_sam9263(priv))
dev->sysfs_groups[0] = &at91_sysfs_attr_group;
diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c
index f5d22c61503f..3a4307bc1d61 100644
--- a/drivers/net/can/flexcan/flexcan-core.c
+++ b/drivers/net/can/flexcan/flexcan-core.c
@@ -2211,7 +2211,7 @@ static int flexcan_probe(struct platform_device *pdev)
priv->transceiver = transceiver;
if (transceiver)
- priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+ priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
priv->irq_boff = platform_get_irq(pdev, 1);
diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
index 56da411878af..73525be6566b 100644
--- a/drivers/net/can/m_can/m_can_platform.c
+++ b/drivers/net/can/m_can/m_can_platform.c
@@ -132,7 +132,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
}
if (transceiver)
- mcan_class->can.bitrate_max = transceiver->attrs.max_link_rate;
+ mcan_class->can.bitrate_max = phy_get_max_link_rate(transceiver);
priv->base = addr;
priv->mram_base = mram_addr;
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index eaf8cac78038..645d5671705d 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1885,7 +1885,7 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
priv->channel = ch;
priv->gpriv = gpriv;
if (transceiver)
- priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+ priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
priv->can.clock.freq = fcan_freq;
dev_info(dev, "can_clk rate is %u\n", priv->can.clock.freq);
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index a1aff00fba7c..89f7410241aa 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -640,6 +640,12 @@ void phy_set_bus_width(struct phy *phy, int bus_width)
}
EXPORT_SYMBOL_GPL(phy_set_bus_width);
+u32 phy_get_max_link_rate(struct phy *phy)
+{
+ return phy->attrs.max_link_rate;
+}
+EXPORT_SYMBOL_GPL(phy_get_max_link_rate);
+
/**
* _of_phy_get() - lookup and obtain a reference to a phy by phandle
* @np: device_node for which to get the phy
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 36307e47760d..af9c3e795786 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -57,6 +57,7 @@ int phy_notify_disconnect(struct phy *phy, int port);
int phy_notify_state(struct phy *phy, union phy_notify state);
int phy_get_bus_width(struct phy *phy);
void phy_set_bus_width(struct phy *phy, int bus_width);
+u32 phy_get_max_link_rate(struct phy *phy);
#else
static inline struct phy *phy_get(struct device *dev, const char *string)
{
@@ -256,6 +257,11 @@ static inline int phy_get_bus_width(struct phy *phy)
static inline void phy_set_bus_width(struct phy *phy, int bus_width)
{
}
+
+static inline u32 phy_get_max_link_rate(struct phy *phy)
+{
+ return 0;
+}
#endif /* IS_ENABLED(CONFIG_GENERIC_PHY) */
#endif /* __PHY_CONSUMER_H */
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 14/22] drm/rockchip: dsi: include PHY provider header
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Andrzej Hajda, Robert Foss, Laurent Pinchart, Jonas Karlman,
Jernej Skrabec, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Simona Vetter
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
The Rockchip DSI controller is a PHY consumer driver, which is also a
PHY provider (calls devm_phy_create()) that lives out of drivers/phy/.
According to Vinod, this is discouraged, although it would be difficult
for me to address a proper movement here.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
---
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index 3547d91b25d3..c0aaa51e0237 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -27,6 +27,7 @@
#include <drm/drm_print.h>
#include <drm/drm_simple_kms_helper.h>
+#include "../../../phy/phy-provider.h" /* FIXME */
#include "rockchip_drm_drv.h"
#define DSI_PHY_RSTZ 0xa0
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 15/22] drm: bridge: cdns-mhdp8546: use consumer API for getting PHY bus width
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Andrzej Hajda, Robert Foss, Laurent Pinchart, Jonas Karlman,
Jernej Skrabec, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Simona Vetter
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
The Cadence MHDP8546 DP bridge driver gets the PHY bus_width attribute
(holding number of lanes) directly, but doing this will no longer be
possible after the definition of struct phy is hidden from consumers.
Use the phy_get_bus_width() API function designed specifically for
consumers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
---
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index ed7ed82ddb64..e3f8a281f147 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1304,7 +1304,7 @@ static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
/* Get source capabilities based on PHY attributes */
- mhdp->host.lanes_cnt = mhdp->phy->attrs.bus_width;
+ mhdp->host.lanes_cnt = phy_get_bus_width(mhdp->phy);
if (!mhdp->host.lanes_cnt)
mhdp->host.lanes_cnt = 4;
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 16/22] media: sunxi: a83-mips-csi2: include PHY provider header
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Mauro Carvalho Chehab, Chen-Yu Tsai, Jernej Skrabec,
Samuel Holland
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
The introduction commit 576d196c522b ("media: sunxi: Add support for the
A83T MIPI CSI-2 controller") says:
This implementation splits the protocol and D-PHY registers and
uses the PHY framework internally. The D-PHY is not registered as a
standalone PHY driver since it cannot be used with any other
controller.
However, this does not matter, and is not the only instance of tight PHY
provider <-> consumer pairing. According to Vinod Koul, having PHY
provider drivers outside of drivers/phy/ is discouraged, although it
would be difficult for me to address a proper movement here.
So just include the private provider API header from drivers/phy/ and
leave a FIXME in place.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Chen-Yu Tsai <wens@kernel.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
---
.../media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
index 24bbcc85013d..1143feeb4fcb 100644
--- a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
+++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
@@ -4,9 +4,9 @@
* Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
*/
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
+#include "../../../../phy/phy-provider.h" /* FIXME */
#include "sun8i_a83t_dphy.h"
#include "sun8i_a83t_mipi_csi2.h"
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 17/22] net: renesas: rswitch: include PHY provider header
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Yoshihiro Shimoda, Michael Dege, Andrew Lunn, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Geert Uytterhoeven,
Russell King (Oracle)
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
As a PHY consumer driver, the Renesas rswitch dereferences internal
fields of struct phy, something which shouldn't be done, as that is
going to be made an opaque pointer.
It is quite clearly visible that the driver is tightly coupled with the
drivers/phy/renesas/r8a779f0-ether-serdes.c, which puts heavy pressure
on the Generic PHY subsystem.
This was discussed before here:
https://lore.kernel.org/linux-phy/20260211194541.cdmibrpfn6ej6e74@skbuf/
but to summarize, it is generally expected that when a Generic PHY
function is called, it takes effect immediately. When this doesn't
happen, the PHY provider driver must change its implementation rather
than the consumer be made to work around it. PHY providers which rely on
a hardcoded call sequence in the consumer are just lazy and wrong.
The most obvious example is commit 5cb630925b49 ("net: renesas: rswitch:
Add phy_power_{on,off}() calling"). Problem description:
- Ethernet PHYs may change phydev->interface. When this happens, the
SerDes must learn of the new phydev->interface using phy_set_mode_ext().
- drivers/phy/renesas/r8a779f0-ether-serdes.c implements phy_set_mode_ext(),
but this only caches the mode and submode into channel->phy_interface
and applies this to hardware during phy_power_on().
The commit author decided to work around this at the consumer site, by
power cycling the PHY for the configuration to take effect.
This had a worse implication from an API perspective in subsequent
commit 053f13f67be6 ("rswitch: Fix imbalance phy_power_off() calling").
It was observed that phy_power_on() and phy_power_off() calls need to be
balanced, and so, the consumer decided to start looking at the struct
phy :: power_count (the technical reason why I'm making this change).
This is also wrong from an API perspective because
- a consumer should only care about its own vote on the PHY power state.
If this is a multi-port submode like QSGMII, a single phy_power_off()
call will not actually turn the PHY off (nor should it).
- the power_count is written under the &phy->mutex, but read unlocked
here.
The rswitch and r8a779f0-ether-serdes drivers both need to be completely
rethought in terms of Generic PHY API call sequence. There is no quick
fix to apply. Just include the PHY provider API along with the consumer
one, to keep working as before when struct phy will be made an opaque
pointer to normal PHY consumers. But this is a bad offender (and it's
not even a provider) so add a FIXME.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Michael Dege <michael.dege@renesas.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/renesas/rswitch_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/renesas/rswitch_main.c b/drivers/net/ethernet/renesas/rswitch_main.c
index 6fe964816322..132be5f15073 100644
--- a/drivers/net/ethernet/renesas/rswitch_main.c
+++ b/drivers/net/ethernet/renesas/rswitch_main.c
@@ -27,6 +27,7 @@
#include <linux/spinlock.h>
#include <linux/sys_soc.h>
+#include "../../../phy/phy-provider.h" /* FIXME */
#include "rswitch.h"
#include "rswitch_l2.h"
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 18/22] pinctrl: tegra-xusb: include PHY provider header
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Linus Walleij, Thierry Reding, Jonathan Hunter,
Krzysztof Kozlowski
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
The tegra-xusb pinctrl driver is also a PHY provider (calls
devm_phy_create() for PCIe and SATA). However, according to Vinod Koul,
having PHY provider drivers outside of drivers/phy/ is discouraged,
although it would be difficult for me to address a proper movement here.
Include the private provider API header from drivers/phy/, but leave a
FIXME in place. It will have to be moved, eventually.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Linus Walleij <linusw@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
drivers/pinctrl/tegra/pinctrl-tegra-xusb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
index c6a51bb21215..6b609bf685c7 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
@@ -7,7 +7,6 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/seq_file.h>
@@ -19,6 +18,7 @@
#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+#include "../../phy/phy-provider.h" /* FIXME */
#include "../core.h"
#include "../pinctrl-utils.h"
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 19/22] power: supply: cpcap-charger: include missing <linux/property.h>
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver,
Sebastian Reichel
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
This file uses dev_fwnode() without including the proper header for it,
relying on transitive header inclusion from:
drivers/power/supply/cpcap-charger.c
- include/linux/phy/omap_usb.h
- include/linux/usb/phy_companion.h
- include/linux/usb/otg.h
- include/linux/phy/phy.h
- drivers/phy/phy-provider.h
- include/linux/of.h
- include/linux/property.h
With the future removal of drivers/phy/phy-provider.h from
include/linux/phy/phy.h, this transitive inclusion would break.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Sebastian Reichel <sre@kernel.org>
---
drivers/power/supply/cpcap-charger.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
index d0c3008db534..24221244b45b 100644
--- a/drivers/power/supply/cpcap-charger.c
+++ b/drivers/power/supply/cpcap-charger.c
@@ -21,6 +21,7 @@
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/gpio/consumer.h>
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 21/22] phy: remove temporary provider compatibility from consumer header
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
Now that all consumers have been updated to no longer dereference fields
inside struct phy, we can hide its definition altogether from public view.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
include/linux/phy/phy.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index af9c3e795786..f11ffbbfea2c 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -12,8 +12,6 @@
#include <linux/phy/phy-props.h>
-#include "../../drivers/phy/phy-provider.h"
-
struct device;
struct device_node;
struct phy;
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH phy-next 22/22] MAINTAINERS: add regex for linux-phy
From: Vladimir Oltean @ 2026-03-04 17:57 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi,
linux-tegra, linux-usb, netdev, spacemit, UNGLinuxDriver
In-Reply-To: <20260304175735.2660419-1-vladimir.oltean@nxp.com>
Some pragmatic shortcuts are being taken by PHY consumer driver authors,
which put a burden on the framework. A lot of these can be caught during
review.
Make sure the linux-phy list is copied on as many keywords that a regex
can reasonably catch.
For simplicity sake this is not perfect (devm_ and of_ are not valid
prefixes for all function names), but I tried to pay attention on
avoiding false matches on things like:
- drivers/net/vendor/device/phy.h
- include/linux/phy.h - network PHY, not generic PHY
So I used \b to try to match on actual word boundaries and be explicit
about what is matched on.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 55af015174a5..bdfa47d9c774 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10713,6 +10713,7 @@ F: Documentation/devicetree/bindings/phy/
F: drivers/phy/
F: include/dt-bindings/phy/
F: include/linux/phy/
+K: \b(devm_)?(of_)?phy_(create|destroy|init|exit|reset|power_(on|off)|configure|validate|calibrate|(get|set)_(mode|media|speed|bus_width|drvdata)|get_max_link_rate|pm_runtime_(get|put)|notify_(connect|disconnect|state)|get|put|optional_get|provider_(un)?register|simple_xlate|(create|remove)_lookup)\b|(struct\s+)?phy(_ops|_attrs|_lookup|_provider)?\b|linux/phy/phy\.h|phy-props\.h|phy-provider\.h
GENERIC PINCTRL I2C DEMULTIPLEXER DRIVER
M: Wolfram Sang <wsa+renesas@sang-engineering.com>
--
2.43.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* Re: [PATCH v4 1/2] dt-bindings: phy: qcom-edp: Add reference clock for sa8775p eDP PHY
From: Bjorn Andersson @ 2026-03-04 18:57 UTC (permalink / raw)
To: Ritesh Kumar
Cc: robin.clark, lumag, abhinav.kumar, sean, marijn.suijten,
maarten.lankhorst, mripard, tzimmermann, airlied, simona, robh,
krzk+dt, conor+dt, quic_mahap, konradybcio, mani, James.Bottomley,
martin.petersen, vkoul, kishon, cros-qcom-dts-watchers, linux-phy,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
linux-scsi, quic_vproddut
In-Reply-To: <20260128114853.2543416-2-quic_riteshk@quicinc.com>
On Wed, Jan 28, 2026 at 05:18:49PM +0530, Ritesh Kumar wrote:
> The initial sa8775p eDP PHY binding contribution missed adding support for
> voting on the eDP reference clock. This went unnoticed because the UFS PHY
> driver happened to enable the same clock.
>
> After commit 77d2fa54a945 ("scsi: ufs: qcom : Refactor phy_power_on/off
> calls"), the eDP reference clock is no longer kept enabled, which results
> in the following PHY power-on failure:
>
> phy phy-aec2a00.phy.10: phy poweron failed --> -110
>
> To fix this, explicit voting for the eDP reference clock is required.
> This patch adds the eDP reference clock for sa8775p eDP PHY and updates
> the corresponding example node.
>
> Signed-off-by: Ritesh Kumar <quic_riteshk@quicinc.com>
Is there any reason why you didn't follow up on this patch Ritesh?
Looks like it's ready to be merged.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Regards,
Bjorn
> ---
> .../devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml | 6 ++++--
> Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml | 1 +
> 2 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
> index e2730a2f25cf..6c827cf9692b 100644
> --- a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
> @@ -200,9 +200,11 @@ examples:
> <0x0aec2000 0x1c8>;
>
> clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
> - <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
> + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_EDP_REF_CLKREF_EN>;
> clock-names = "aux",
> - "cfg_ahb";
> + "cfg_ahb",
> + "ref";
>
> #clock-cells = <1>;
> #phy-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> index 4a1daae3d8d4..0bf8bf4f66ac 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> @@ -74,6 +74,7 @@ allOf:
> compatible:
> enum:
> - qcom,glymur-dp-phy
> + - qcom,sa8775p-edp-phy
> - qcom,x1e80100-dp-phy
> then:
> properties:
> --
> 2.34.1
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox