Linux-PHY Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
	Peter Chen <hzpeterchen@gmail.com>,
	Luca Ceresoli <luca.ceresoli@bootlin.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Sandy Huang <hjc@rock-chips.com>,
	Andy Yan <andy.yan@rock-chips.com>,
	Yubing Zhang <yubing.zhang@rock-chips.com>,
	Frank Wang <frank.wang@rock-chips.com>,
	Andrzej Hajda <andrzej.hajda@intel.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <rfoss@kernel.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Amit Sunil Dhamne <amitsd@google.com>,
	Dragan Simic <dsimic@manjaro.org>,
	Johan Jonker <jbx6244@gmail.com>,
	Diederik de Haas <didi.debian@cknow.org>,
	Peter Robinson <pbrobinson@gmail.com>,
	Hugh Cole-Baker <sigmaris@gmail.com>,
	dri-devel@lists.freedesktop.org, Chaoyi Chen <kernel@airkyi.com>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	dri-devel@lists.freedesktop.org,
	Chaoyi Chen <chaoyi.chen@rock-chips.com>
Subject: Re: [PATCH v15 1/9] drm/bridge: Implement generic USB Type-C DP HPD bridge
Date: Thu, 28 May 2026 17:37:10 +0200	[thread overview]
Message-ID: <q6ufdWF5QJ60i9KlIiE_AA@collabora.com> (raw)
In-Reply-To: <20260304094152.92-2-kernel@airkyi.com>

On Wednesday, 4 March 2026 10:41:44 Central European Summer Time Chaoyi Chen wrote:
> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> 
> The HPD function of Type-C DP is implemented through
> drm_connector_oob_hotplug_event(). For embedded DP, it is required
> that the DRM connector fwnode corresponds to the Type-C port fwnode.
> 
> To describe the relationship between the DP controller and the Type-C
> port device, we usually using drm_bridge to build a bridge chain.
> 
> Now several USB-C controller drivers have already implemented the DP
> HPD bridge function provided by aux-hpd-bridge.c, it will build a DP
> HPD bridge on USB-C connector port device.
> 
> But this requires the USB-C controller driver to manually register the
> HPD bridge. If the driver does not implement this feature, the bridge
> will not be create.
> 
> So this patch implements a generic DP HPD bridge based on
> aux-hpd-bridge.c. It will monitor Type-C bus events, and when a
> Type-C port device containing the DP svid is registered, it will
> create an HPD bridge for it without the need for the USB-C controller
> driver to implement it.
> 
> Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> 
> (no changes since v14)
> 
> Changes in v13:
> - Only register drm dp hpd bridge for typec port altmode device.
> 
> (no changes since v12)
> 
> Changes in v11:
> - Switch to using typec bus notifiers.
> 
> (no changes since v10)
> 
> Changes in v9:
> - Remove the exposed DRM_AUX_HPD_BRIDGE option, and select
> DRM_AUX_HPD_TYPEC_BRIDGE when it is available.
> - Add more commit comment about problem background.
> 
> Changes in v8:
> - Merge generic DP HPD bridge into one module.
> ---
> 
>  drivers/gpu/drm/bridge/Kconfig                | 10 ++++
>  drivers/gpu/drm/bridge/Makefile               |  1 +
>  .../gpu/drm/bridge/aux-hpd-typec-dp-bridge.c  | 49 +++++++++++++++++++
>  3 files changed, 60 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
> 
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index a250afd8d662..559487aa09a9 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -30,6 +30,16 @@ config DRM_AUX_HPD_BRIDGE
>  	  Simple bridge that terminates the bridge chain and provides HPD
>  	  support.
>  
> +if DRM_AUX_HPD_BRIDGE
> +config DRM_AUX_HPD_TYPEC_BRIDGE
> +	tristate
> +	depends on TYPEC || !TYPEC
> +	default TYPEC
> +	help
> +	  Simple bridge that terminates the bridge chain and provides HPD
> +	  support. It build bridge on each USB-C connector device node.
> +endif
> +
>  menu "Display Interface Bridges"
>  	depends on DRM && DRM_BRIDGE
>  
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index c7dc03182e59..a3a0393d2e72 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -1,6 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0
>  obj-$(CONFIG_DRM_AUX_BRIDGE) += aux-bridge.o
>  obj-$(CONFIG_DRM_AUX_HPD_BRIDGE) += aux-hpd-bridge.o
> +obj-$(CONFIG_DRM_AUX_HPD_TYPEC_BRIDGE) += aux-hpd-typec-dp-bridge.o
>  obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o
>  obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
>  obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o
> diff --git a/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
> new file mode 100644
> index 000000000000..d915e0fb0668
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
> @@ -0,0 +1,49 @@
> +// SPDX-License-Identifier: GPL-2.0+

Having a copyright statement added here is likely required.
Something like

/*
 * Copyright (C) 2026 Rockchip Electronics Co., Ltd.
 *
 * Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>
 */

will suffice. While I hope it's never relevant for a driver this
small, explicit copyright statements in this form have a legal
effect in some jurisdictions like the US, where by law it
automatically dismisses the defense that the copyright holder
wasn't known.

> +#include <linux/of.h>
> +#include <linux/usb/typec_altmode.h>
> +#include <linux/usb/typec_dp.h>
> +
> +#include <drm/bridge/aux-bridge.h>
> +
> +static int drm_typec_bus_event(struct notifier_block *nb,
> +			       unsigned long action, void *data)
> +{
> +	struct device *dev = (struct device *)data;

Small nitpick: The explicit (struct device *) cast of data isn't
needed here. Just

    struct device *dev = data;

will work fine. The benefit is that if the type of "data" ever changes
(e.g. from void *data to const void *data) then we're not silencing
a warning/error through an explicit cast.

> +	struct typec_altmode *alt = to_typec_altmode(dev);
> +
> +	if (action != BUS_NOTIFY_ADD_DEVICE)
> +		goto done;
> +
> +	/*
> +	 * alt->dev.parent->parent : USB-C controller device
> +	 * alt->dev.parent         : USB-C connector device
> +	 */
> +	if (is_typec_port_altmode(&alt->dev) && alt->svid == USB_TYPEC_DP_SID)
> +		drm_dp_hpd_bridge_register(alt->dev.parent->parent,
> +					   to_of_node(alt->dev.parent->fwnode));
> +
> +done:
> +	return NOTIFY_OK;
> +}

Nitpicking: the "done" label and "goto done" here is redundant.
You could remove the label and replace the goto with another
"return NOTIFY_OK;". There's no functional change here though.

> +
> +static struct notifier_block drm_typec_event_nb = {
> +	.notifier_call = drm_typec_bus_event,
> +};
> +
> +static void drm_aux_hpd_typec_dp_bridge_module_exit(void)
> +{
> +	bus_unregister_notifier(&typec_bus, &drm_typec_event_nb);
> +}
> +
> +static int __init drm_aux_hpd_typec_dp_bridge_module_init(void)
> +{
> +	bus_register_notifier(&typec_bus, &drm_typec_event_nb);
> +
> +	return 0;
> +}
> +
> +module_init(drm_aux_hpd_typec_dp_bridge_module_init);
> +module_exit(drm_aux_hpd_typec_dp_bridge_module_exit);
> +
> +MODULE_DESCRIPTION("DRM TYPEC DP HPD BRIDGE");
> +MODULE_LICENSE("GPL");
> 

Feel free to add yourself as MODULE_AUTHOR here. :)

With those things changed:

Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>

Kind regards,
Nicolas Frattaroli



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  reply	other threads:[~2026-05-28 15:38 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-04  9:41 [PATCH v15 0/9] Add Type-C DP support for RK3399 EVB IND board Chaoyi Chen
2026-03-04  9:41 ` [PATCH v15 1/9] drm/bridge: Implement generic USB Type-C DP HPD bridge Chaoyi Chen
2026-05-28 15:37   ` Nicolas Frattaroli [this message]
2026-05-29  1:18     ` Chaoyi Chen
2026-03-04  9:41 ` [PATCH v15 2/9] drm/bridge: aux: Add drm_aux_bridge_register_from_node() Chaoyi Chen
2026-05-28 15:46   ` Nicolas Frattaroli
2026-03-04  9:41 ` [PATCH v15 3/9] dt-bindings: phy: rockchip: rk3399-typec-phy: Support mode-switch Chaoyi Chen
2026-03-04  9:41 ` [PATCH v15 4/9] phy: rockchip: phy-rockchip-typec: Add typec_mux/typec_switch support Chaoyi Chen
2026-05-28 20:16   ` Nicolas Frattaroli
2026-05-29  8:13     ` Chaoyi Chen
2026-03-04  9:41 ` [PATCH v15 5/9] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge Chaoyi Chen
2026-03-04  9:41 ` [PATCH v15 6/9] drm/rockchip: cdn-dp: Support handle lane info without extcon Chaoyi Chen
2026-05-20 11:10   ` Heiko Stuebner
2026-03-04  9:41 ` [PATCH v15 7/9] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection Chaoyi Chen
2026-05-20 11:12   ` Heiko Stuebner
2026-03-04  9:41 ` [PATCH v15 8/9] arm64: dts: rockchip: Add missing dp_out port for RK3399 CDN-DP Chaoyi Chen
2026-03-04  9:41 ` [PATCH v15 9/9] arm64: dts: rockchip: rk3399-evb-ind: Add support for DisplayPort Chaoyi Chen
2026-05-20 11:06   ` Heiko Stuebner
2026-05-19 13:43 ` [PATCH v15 0/9] Add Type-C DP support for RK3399 EVB IND board Heikki Krogerus
2026-05-20  1:13   ` Chaoyi Chen
2026-05-20 11:03     ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=q6ufdWF5QJ60i9KlIiE_AA@collabora.com \
    --to=nicolas.frattaroli@collabora.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=amitsd@google.com \
    --cc=andrzej.hajda@intel.com \
    --cc=andy.yan@rock-chips.com \
    --cc=chaoyi.chen@rock-chips.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=didi.debian@cknow.org \
    --cc=dmitry.baryshkov@oss.qualcomm.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=dsimic@manjaro.org \
    --cc=frank.wang@rock-chips.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=heiko@sntech.de \
    --cc=hjc@rock-chips.com \
    --cc=hzpeterchen@gmail.com \
    --cc=jbx6244@gmail.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=kernel@airkyi.com \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=luca.ceresoli@bootlin.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=pbrobinson@gmail.com \
    --cc=rfoss@kernel.org \
    --cc=robh@kernel.org \
    --cc=sigmaris@gmail.com \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    --cc=vkoul@kernel.org \
    --cc=yubing.zhang@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox